Lexmark X2470 All-In-One InkJet Printer - Answered Questions & Fixed issues


Uninstall the firmware with revo uninstall, install the latest firmware.
Ink? connection? Paper too much or too little
Regards
Sir Dana Taylor

Lexmark X2470... | Answered on Apr 26, 2017 | 56 views


go to Lexmark website they have a support area you can download the driver from.

Lexmark X2470... | Answered on Dec 02, 2013 | 198 views


Hello there
You may not see a paper jam.
So it best to try this may clear what ever it is.

This may work for you, it has worked for many here I given this advice so gave it a try it could work for you. Generally when this happens, something has fallen into the printer, or a piece of paper has been jammed in there.

First step, remove the ink cartridge, and turn the printer upside down and gently shake it, see if anything comes out.

If nothing goes, or you can't hear anything rattling around, get a piece of cardstock paper (60lb or heavier) and gently push this through the printer, to see if it will help push out what might be stuck in there.

And gave the rode that the ink slides on a good clean and maybe a bit oil on cloth and wipe the rod with it.

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Lexmark X2470... | Answered on Jun 08, 2013 | 161 views


Just unplug the printer from the power source. With the cover open, hold the white tape in the middle inside the printer. The other end of it is connected to the carrier. Gently slide the carrier to the center. Load the cartridges. Close the cover. Plug the printer back to power source. Hope this helps.

Lexmark X2470... | Answered on Dec 30, 2012 | 17 views


Here is the way I bypass the alignment when I get a new cartridge: When the screen comes up that is asking for it, it does not have the option to "cancel" the printing of it. I just take the paper out of the printer and press "print". Since there is no paper in it, it cannot print. This will make the same screen come up again, but this time it has the "cancel" option. Now, every time I want to print something out, the screen that wants to print a alignment page comes up, and I just click on "cancel" - after that I can do my printing. This is a bit annoying, but it saves me some ink.

Lexmark X2470... | Answered on Jan 23, 2013 | 1,331 views


To align the cartridge from the control panel:
Please follow the steps given below:

1. Please Load a plain paper.
2. Press and hold the "Scan" button for three seconds.
3. An alignment page prints.
4. Place the alignment page onto the scanner glass.
5. Press the "Scan" button.
6. Once scanning is complete, the cartridge has been aligned for optimal print quality. Alignment must be complete before continuing with any print jobs.

Lexmark X2470... | Answered on Nov 14, 2012 | 921 views


Add printer , select advanced , browse cd for driver . Do you have the right cd ? Which version of windows are you running? I can organise u a download link if u give me those particulars [IMG]http://i1157.photobucket.com/albums/p585/mritsurgeon/it/d0ecd9e2.jpg[/IMG] [IMG]http://i1157.photobucket.com/albums/p585/mritsurgeon/it/3453d6a2.jpg[/IMG] [IMG]http://i1157.photobucket.com/albums/p585/mritsurgeon/it/d073a28e.jpg[/IMG]

Lexmark X2470... | Answered on May 17, 2012 | 145 views


Leading cause of paper jams or misfeeds is debris / foreign objects that accidentally fell into the paper feed area. Please try this approach to fix the problem:

  1. Remove the sheets of paper from the feeder.
  2. Grab a flashlight and look inside the feeder for any debris or foreign objects.
  3. If you're willing and physically able, you may also carefully turn the printer over. Any debris should just freely roll out from the feeder.
  4. If feeder is clear, place the printer on the table. Open the printer cover and remove the cartridges.
  5. Check the cartridge area for any obstructions in the paper path.
  6. Close the printer cover.
  7. Re-brick your printer by pulling out the power supply - the black box where the power cord is plugged into. Re-plug after 30 seconds.
  8. When the printer turns on, reinsert the cartridges and load some paper. Try to print again to verify that the problem is fixed.

Lexmark X2470... | Answered on Apr 11, 2012 | 57 views


Before you download the driver, please check if your Windows 7 is running on 32-bit or 64-bit system type. Go to Start menu -> right-click on Computer -> Properties. Take note of the System Type.
Click on the link below to download the Lexmark X2470 driver from the Lexmark website. - Lexmark X2470 Driver for Win7 32-bit - Lexmark X2470 Driver for Win7 64-bit
Download, execute the file and follow the instructions on the software.
I hope this information has been helpful. Thanks.

Lexmark X2470... | Answered on Dec 29, 2011 | 73 views


Please visit the Lexmark website to download and install the Lexmark X2470 printer driver on your computer. Select your operating system > click on "FILTER" > click on the driver under Recommended Downloads > download and execute the file. Simply follow the instructions on your computer screen to complete the installation.
I hope this helps.

Lexmark X2470... | Answered on Nov 10, 2011 | 46 views


Check if your Windows 7 is running on 32-bit or 64-bit operating system. Go to Start menu > right-click on Computer > click on Properties. Take note of the System Type.
Use the link below and select the corresponding driver for your operating system:
- Lexmark X2470 Driver for Windows 7 32-bit - Lexmark X2470 Driver for Windows 7 64-bit
Download and execute the file. Simply follow the instructions on your computer screen to complete the installation.

Lexmark X2470... | Answered on Nov 01, 2011 | 323 views


Hi,

Make sure you have the correct driver. Windows 7 comes in 32 bit and 64 bit versions. Also, you should uninstall the current driver for the printer before re-installing any other drivers.

See this link for the driver (select your system) and additional information.

http://support.lexmark.com/index?locale=en&page=product&productCode=LEXMARK_X2470&segment=SUPPORT&userlocale=EN_US&frompage=null#1

Lexmark X2470... | Answered on Oct 20, 2011 | 93 views


In most cases the printer driver software can have errors while being in use or is shut down. So to reset remove your printer from the PC and uninstall the printer software. Now reinstall the printer software and then connect the Printer ONLY WHEN PROMPTED, to be detected as a new hardware as it will be installed. Now check the printer properties to see the ink levels.
Activate head cleaning before a test is taken.

Thank you for using Fixya

Lexmark X2470... | Answered on Sep 23, 2011 | 26 views


Sometimes the ink cartridge carrier won't automatically move to its loading position even when the printer is on and the cover is open. Follow the steps below:


1. Unplug the printer from the power source.

2. With the cover open, hold the solid white strip that connects from the carrier assembly to the ink cartridge carrier and gently slide the cartridge carrier to the center of the printer.

3. Remove the used cartridges.

4. Load the new cartridges. Close the cover.

5. Plug the printer back to the power source.

Lexmark X2470... | Answered on Sep 12, 2011 | 133 views


Try cleaning the copper contacts on the cartridge and on the printer. Maybe there are some ink or dirt blocking the contact. tnx

Lexmark X2470... | Answered on Aug 18, 2011 | 47 views


A quick fix for most communication errors can be achieved by resetting the printer and/or rebooting the PC. Disconnect the printer from your computer, reboot your pc, and unplug/re-plug printer into the power source to reset it. When everything turns back on, reconnect the printer into your computer. Wait until your computer fully recognizes the USB connection. Try to print again.

Lexmark X2470... | Answered on Aug 03, 2011 | 42 views


WTF...wheres the solution. Bunch a ****!

Lexmark X2470... | Answered on Jul 28, 2011 | 7,212 views


Look for any foriegn objects or old torn paper from an earlier jam. Something is either obstructing or mis-guiding the paper. If nothing is found, use a can of compressed air to blow thr paper intake area out, then test print again.

If still not solved, use a cottom swan soaked in alcohol to scrub clean the rubber paper pickup roller. Over time it gets slick from paper dust and the paper will notget grabbed evenly, causing it to skew as it's pulled in.

Lexmark X2470... | Answered on Jul 26, 2011 | 84 views

Not finding what you are looking for?
Lexmark X2470 All-In-One InkJet Printer Logo

317 questions posted

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...