Lexmark X1270 All-In-One InkJet Printer - Page 8 - Answered Questions & Fixed issues

If the encoder strip has become unseated: 1 Turn off the printer and disconnect the power cable from the back of the unit. 2 Open the printer's front cover. 3 Pinch the top of the carrier belt and gently move the cartridge carrier to the center of the printer. 4 On the back of the cartridge carrier, there is a small slot that the encoder strip fits into. Gently push the encoder strip down and back up to get it into the slot. NOTE: If the strip is completely out of the slot, it may be necessary to move it first forward and then back. 5 Move the cartridge carrier back to the left-hand side of the printer with the carrier belt. 6 Reconnect the power supply and turn the printer back on
If you need some graphical reference, please refer to this article: Printer Cartridge Stalls or Is Blocked .

Lexmark X1270... | Answered on May 03, 2011 | 206 views

Yes. The Lexmark x1270 is a discontinued model classified as an inkjet printer. It is compatible with the #16 and #17 black ink cartridges and #26 and #27 color ink cartridge.

Lexmark X1270... | Answered on May 02, 2011 | 105 views

Visit the Lexmark website using the links below to download and install the Lexmark X2695 drivers for Windows 7. Before downloading, check your version of Windows 7 if it's 32-bit or 64-bit. Go to Start menu -> right-click on Computer -> Properties. Take note of the Service Type.
- Lexmark X2695 Driver for Windows 7 32-bit - Lexmark X2695 Driver for Windows 7 64-bit
Download and execute the file. Follow the prompts on your computer screen.
I hope this information has been helpful.

Lexmark X1270... | Answered on Apr 19, 2011 | 313 views

If you lost your CD for the driver, try downloading it in their official website for the driver. here is the link.
-On the downloads. click the link below the recommended downloads.

-Hope this helps. Thank you for using Fixya!

Lexmark X1270... | Answered on Apr 19, 2011 | 32 views

You can download the Lexmark printer drivers from theirsupport WEB site. Please click on this link and select your model printer todownload :-http://support.lexmark.com/index?page=home&locale=EN&userlocale=EN_US&segment=DOWNLOAD

Lexmark X1270... | Answered on Apr 15, 2011 | 53 views

you can download the driver on this site:

Lexmark X1270... | Answered on Apr 14, 2011 | 28 views

Hi, you can download the software here:


Remember to select windows 7, 32 or 64 bit.

Hope this will help you.

Lexmark X1270... | Answered on Apr 12, 2011 | 41 views

Unfortunately there's no Windows 7 driver for this printer, but you can still install it in compatibility mode. Download the Windows Driver from HERE, and follow these instructions [click HERE.] Let me know if you need further help.

Good Luck.
Thanks for using FixYa.

Lexmark X1270... | Answered on Apr 07, 2011 | 92 views

load the aproprite device driver with your operating system, and make sure the printer is in good condition.

Lexmark X1270... | Answered on Apr 05, 2011 | 13 views

Lexmark has discontinued this printer and last Operating system supported was xp. I have found site that says that they have windows 7 drivers but have never used this site before. i would scan all the files for possible viruses just in case.

Now on contrary this Microsoft site says that windows 7 does not need drivers installed form a CD because it will automatically install what it needs. You might have to reboot after plugging in usb. I"t says it is same for 32 bit and 64 bit version.


Hope this helps.

Lexmark X1270... | Answered on Apr 02, 2011 | 98 views

You can download the sofware / driver from here . select the os before proceeding :
Best rehards
fanaudi .

Lexmark X1270... | Answered on Mar 31, 2011 | 42 views

Dear Friend
Download and install the setup
and your problem will be solved

open this link

if this is useful than dont forget to vote me
Is that Useful?

Lexmark X1270... | Answered on May 06, 2011 | 497 views

You can contact Lexmark Technical Support at 1-800-539-6275.
You may need the serial number of your printer.

Lexmark X1270... | Answered on Mar 13, 2011 | 59 views


Lexmark X1270... | Answered on Mar 12, 2011 | 57 views

One card is not recognized. Try to remove, clean contacts on the cartridge and the printer and then put them back.
Check if you use the correct cartridges and you put in place.
If I could be of further assistance, let me know. If thishelps or solves the issue, please rate it and give a testimonialfor my response.

Lexmark X1270... | Answered on Mar 11, 2011 | 87 views

Refer to this article in the Lexmark website about No Communications Error When Trying to Print or Scan. This will help you determine and resolve the problem you are experiencing.

Lexmark X1270... | Answered on Mar 09, 2011 | 31 views

These articles in the Lexmark website may help resolve your communication problem:
- Communication Not Available' Error Message and Print Job Stalls in Print Queue - No Communications Error When Trying to Print or Scan
Hope these help. Thanks.

Lexmark X1270... | Answered on Mar 09, 2011 | 566 views

There is a recent firmware update that fixes the problem you are describing. Click on this link: Lexmark Interpret S405 Firmware Update to download the update. If you encounter any problem updating your printer, please contact Lexmark technical support for additional assistance. Thanks.

Lexmark X1270... | Answered on Mar 09, 2011 | 1,256 views

Not finding what you are looking for?
Lexmark X1270 All-In-One InkJet Printer Logo

1,415 questions posted

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts


Level 3 Expert

4345 Answers


Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides