20 Most Recent Brother Multi-Function Center MFC-240C All-In-One InkJet Printer Questions & Answers


Yes it works Thanks

Brother... | Answered on Dec 01, 2018


I have figured it out! I have a Brother MFC 240CN and I was having the same alignment problem and I followed the instructions from the printer prompt as well as the manual and it does not work.

So, this is what I did. I ran the alignment test print, then when it asked if it matches, I would say "No". And then I would pick number "8" to be the one that most closely matched "0" regardless if it did or not. I did this for the 600 and 1200dpi. Then when I ran the alignment test print again, it looked better! So I repeated it again and again picking "8" each time and it looked better with every test print. After about 4 or 5 tries, it looked normal again!

I hope everyone else with this problem will see this response and I hope it works too. I was getting so frustrated with this problem. Now I don't have to get it serviced or buy a new printer!

Brother... | Answered on Sep 23, 2018


See picture how to do that :-)

Brother... | Answered on Jun 06, 2018


At this website www.reliable-store.com I found so much of information on how to repair vehicles and technical issues in detail.. Also complete, much better language, and they also have live assistance feature

Brother... | Answered on Mar 07, 2018


Hello,

The 36 error mean: The machine does not work due to a paper jam. Clear the paper jam, if doesn't work maybe a sensor is dirt or bad. To disassambly the printer you need the service manual and some know how ( electronics knowledge).

All the best !

Brother... | Answered on Feb 21, 2018


I use generic cartridges all the time in my brother printers with no problem. better to pay $2 per cartridge than whatever the brother brand ones cost!

Brother... | Answered on Nov 29, 2017


Yes, you can manually clean the printhead. I can't provide step by step instructions, but the print head is the piece that your ink cartridges go into. There is probably a lever that holds it locaked into place. You will want to take out the ink, then open the lever and remove the print head. Then clean where the ink cartridges sit, then gently clean any coppor contacts you see and then clean the print nozzles on the bottom of the print head. Do all of this with distilled water. Dry completely and re-install along with your ink.

If this doesn't solve the issue, you can buy replacement print heads.

Brother... | Answered on Nov 11, 2017


Common error of brother mfc/dcp printers.
Unfurtunately there is nothing what you can do.

Call brother hotline ask for service/guarantee repair.

Brother... | Answered on Oct 04, 2017


Easy solution is to download drivers from the brother website. Takes just a few minutes and you should then be up and running or printing.

Brother... | Answered on Aug 19, 2017


I also had this problem, your solution was spot-on, remove the top cover and control panel and re-seat the encoded strip. simple.
boy, are you guys good.

Brother... | Answered on Aug 06, 2017


Use bin and purchase new. Repair costs are high.

Brother... | Answered on Aug 02, 2017


have you thought of using avery envelope sticker sheets instead
http://www.averyproducts.com.au/avery/en_au/Products/Labels
you can also download templates to use in word to line up the printing to the stickers

Brother... | Answered on May 31, 2017


(same response posted in another thread)

The issue is NOT the sleep mode)/

My first solotution was to reinstall the printer as a new printer. But that is uncessary. The fix is as easy as changing the IP address the in Port.

The problem is the the IP address for your wirelss is not static. and when it changes, the printer does not recognize the new IP address. When this occurs. go the the printer folder ( in the control panel) and click on 'add new priter'. Then select 'add a network wirless printer . NO NEED TO INSTALL THE PRINTER...you just want to see the IP address.

Note the IP address.

GO to the printer, click on the right mouse and select 'properties'
Click on Port
You will see the current port already highlighted.
Click on ' configure port' and change the IP address under "printer name or IP address.
Click OK.
Problem solved

Good luck.

DeniseA

Brother... | Answered on Apr 20, 2017


http://support.brother.com/g/b/faqend.aspx?c=gb&lang=en&prod=fax2440c_us_eu&faqid=faq00000168_003

Brother... | Answered on Nov 25, 2016

Not finding what you are looking for?
Brother Multi-Function Center  MFC-240C All-In-One InkJet Printer Logo

942 questions posted

Ask a Question

Usually answered in minutes!

Top Brother Office Equipment & Supplies Experts

James Cagle
James Cagle

Level 2 Expert

481 Answers

Jim Keysor

Level 2 Expert

331 Answers

ctnozil

Level 2 Expert

270 Answers

Are you a Brother Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Brother Office Equipment & Supplies

  • Brother Office Equipment & Supplies

Most Popular Question

mfc 240c will not print yellow despite

  • Office Equipment & Supplies
Loading...