20 Most Recent
- Page 4 Questions & Answers
Printing Photos on Photo Paper
Ensure u are placing the paper in the photo tray..
if u r printing from the memory card which is inserted in the printer..ensure that the PHOTO BUTTON on the printer is on..
You can also try to reset the printer by going to the SETTINGS/TOOLS menu (RENCH SYMBOL) and then look for the Factory Restore (Might be under "Preferences")
on Jun 20, 2016
Paper jammed in printer - need to remove paper tray
This works from HP help link in error message:
Turn off the
Press in the tab on the rear
door to release the door. Remove the door by pulling it away from the
Caution Trying to clear a paper jam from the
front of the HP All-in-One can damage the print mechanism. Always access and
clear paper jams through the rear door.
on Dec 08, 2015
Error code: 0xc18a0001
This error code indicates that you have an 'Ink system failure'. The problem is caused by air the ink feed tubes. If you either use all of the ink down to 0% or you use poorly refilled ink cartridges it can cause the printer to **** air into the feed tubes instead of ink. We have a step by step guide to purge the feed tubes of air on our site at: http://www.ccl-la.com/blog/index.php/category/printer-repair/
There are 2 different versions of the procedure find the one for your type printer and follow the guide and within about 10 minutes you will be printing again.
I hope this helps, if so please rate our solution.
on Jun 30, 2015
Printing PDF files
I had this problem after I had fixed a problem printing from Quicken. I was able to print from Quicken by changing the print option in Windows -- mine was set to "Spool documents" and I changed it to "Print directly from printer" -- the advice I was given was to change it from whatever it was set at to the other option. For printing a PDF file, I changed it back to "Spool documents" and it allowed me to print the PDF file. Try this and see if it works for you -- click the Windows Start button and select Settings, then Printers and Faxes. Right click on the selected printer and select Properties. In the properties window look for a setting to print directly to printer or spool documents -- mine was under the Advanced option. Try the option not currently selected -- in my case, I changed it back to Spool documents with Begin printing immediately -- and then try to print a PDF file. It looks like I will have to toggle back and forth when I am printing from Quicken and when I am printing a PDF file. Hope this works for you.
on Feb 16, 2015
Not finding what you are looking for?