20 Most Recent
Questions & Answers
Steven its a 99 s 10 no power at the fuse ?
im moved you.
no power mean the voltmeter is not 12v>???????
the fuse has 2 ends, no power to me means both ends, right.>?
what fuse box, cab or bay?
that means the power ;means the fuse in cab is dead because the
MAIN fuse in the BAY is blown.
just like you home there are main fuses then sub branch fuses.
then the battery, its dead, all is dead.
1 step at time use the voltmeter and walk backwards to battery
and find the OPEN circuit. whomever it is. (chips fall where the may)
as will TRUE cause.
on Jul 03, 2014
Trans gets stuck where it only has 2nd 3rd no od or 1rst gear
Do you have a code reader? If there is a message informing you that the transmission is in limp mode. You should be able to retrieve engine codes. From your symptoms I think that you either have an issue with fluid flow (clogged filter and/or screens), worn pump, low trani fluid level, trani fluid temp, possibly a correlation problem with the speed sensors, clogged air filter, dirty MAF sensor, clogged fuel filter, or blockage in the exhaust system. It will only be through diagnostics that these suggestions can be crossed out and narrowed down. Please let me know if that helps or if I can be of any more assistance, good luck.
on Mar 17, 2014
Not finding what you are looking for?