20 Most Recent Hunter Fan Company 5/1/1 Programmable Thermostat - Page 7 Questions & Answers


Can you put a 2X4 between the joists and bolt the fox to that?

Hunter Fan... | Answered on Jun 09, 2010


"G" terminal is for the fan, typically using a green wire. "C" terminal is the common, basically a ground, typically using a blue wire. Also, leave in the jumper between "RH" and "RC".

Hunter Fan... | Answered on May 19, 2010


Hi,
Yes...just keep the four wires wrapped as two and then hook up as a two wire connection...
The two wires wrapped together just makes it work better if the wires are a bit too light...
The two wires wrapped together will function as one wire...

heatman101

Hunter Fan... | Answered on May 06, 2010


This is the corrcet wiring:
G - G fan relay
R - RC1, RC put a jumper RH ( to supply power to the cool and heat)
L - no wire connected (malfunction indicator) tape- off that wire
E - Emergency heat relay
B - W/B ( reversing valve in your heat pump energized during heat )
W2 - Auxilliary heat
Y - Y1 ( compressor contact)
O- Y/O ( reversing valve is energized during cool)
make sure that the system selector is on heat pump position.

Hunter Fan... | Answered on Apr 26, 2010


The W- terminal is for the HEAT RELAY.
Connect the brown and white wire to the WB terminal which is heat relay of the Hunter thermostat.

Hunter Fan... | Answered on Apr 26, 2010


Hi,

You can download the complete instruction manual in PDF format by clicking this link.

The programming instructions are given on page number 16 onwards.
  • You'll require Adobe PDF Reader installed on your computer to view the manual. If it is not already installed on your computer, download it free from: http://get.adobe.com/reader/
To magnify the text of the manual, kindly press the "+" button in the Adobe PDF reader window

Hope this solves your problem. Thanks for using FixYa.

Hunter Fan... | Answered on Apr 21, 2010


If the smell is gone 24 hours after the lights were turned off, turn on the fan & leave the lights off. Check for the burning order again. If you can smell it replace the fan. It will be the armature shorting out in the fans motor

Hunter Fan... | Answered on Apr 15, 2010


That is correct, you need a heatpump thermostat, it will have a EM heat setting on it

Hunter Fan... | Answered on Apr 04, 2010


Hello,
The switch to change it should be on the upper left corner on the back of the t-stat.
You can see where it is here on page 14-15..

http://www.hunterfan.com/uploadedFiles/Support/Downloads/44550.pdf?n=4754

Heatman101

Hunter Fan... | Answered on Mar 01, 2010


Just hold down the two buttons for 5 seconds and it will be reprogrammed.

Good luck.

Hunter Fan... | Answered on Feb 13, 2010


You have to set the hi and lo temp set so the control will have a range to cover. If the temps are set the same then there is no place for the control to run the furnace. It is like filling a hole with snow, when it is full you stop and when it empties you fill it again.

Hunter Fan... | Answered on Feb 12, 2010


There is no real color code for wiring but the standard is red wire to r, yellow wire to y,white wire to w, green wire to g, blue wire to c. since there's no c on your t- stat its probably battery operated, but in your case im betting white wire to w, and blue wire to g.

Hunter Fan... | Answered on Feb 09, 2010


same problem once it gets to the set temperature the burner turns off and the fan stays on and blows cold air.

Hunter Fan... | Answered on Feb 02, 2010


check your reset button and if that does not work take off the plate and manually reset your thermostat.

Hunter Fan... | Answered on Feb 02, 2010

Not finding what you are looking for?
Hunter Fan Company 5/1/1 Programmable Thermostat Logo

344 questions posted

Ask a Question

Usually answered in minutes!

Top Hunter Dryers Experts

Joe Paxton

Level 1 Expert

9 Answers

Paul Bade

Level 3 Expert

1662 Answers

Marvin
Marvin

Level 3 Expert

85178 Answers

Are you a Hunter Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Hunter Dryers

  • Hunter Dryers

Most Popular Question

thermostat will not stay setting set

  • Dryers
Loading...