20 Most Recent Kenwood Kpg-128d V1.3 Programming Software Tk-2360 & Tk-3360 - Questions & Answers


See Service Manual PAge 11, if your problem not splve then remove R404 and see result, it will be OK.https://www.manualslib.com/download/582236/Kenwood-Tk-3202.html

Kenwood Radio... | Answered on Aug 07, 2019


Because your Radio is not power up so you have must change the EEPROM of your radio from Radio Service Shop, because your old EEPROM all data erased. Normally during update failure this not happen and Radio powerup, only programming of radio erase and LCD show no program and thid fault can be rectify when again updating process run, but your problem is not like that, your radio is not powerup, so you need to change EEPROM then your problem will be solve

Kenwood Radio... | Answered on Jul 11, 2019


https://www.voipon.co.uk/ippbx/pdfs/glocom_admin_manual.pdf From above link you can benefitted, because it is general full information for glocom user.

Kenwood Radio... | Answered on May 28, 2019


On you both device and make search with phone, when your phone sreach that device, it will show model numder, then you select your device and pair it.

Kenwood Radio... | Answered on May 28, 2019


https://www.manualslib.com/manual/1268780/Kenwood-Nx-210.html
Above link is for service manual for NX-210

Kenwood Radio... | Answered on May 10, 2019


You press side button or keyboad button one by one and see this number change and and light flashing occure or not, if nothing happen then you check 1k ohm cp arround cpu, may be any cp open circuit and cpu not communicating with their peripheral.

Kenwood Radio... | Answered on May 10, 2019


You cannot reset if you dont' know, you need to replace the EEPROM IC or contact with Kenwood Co.

Kenwood Radio... | Answered on May 10, 2019


This pass word is at Power ON or Read/Write, in both cases it is better you change tge EEPROM or you contact with Kenwood Co.

Kenwood Radio... | Answered on May 10, 2019


You can read/write this radio by KPG-87D, open program, select model and write frequency. and write it at the radio, if you not succeed then change EEPROM and write ir,

Kenwood Radio... | Answered on May 10, 2019


From Kenwood Corporation you can get. Part #X58-4050-00 you can order for that.

Kenwood Radio... | Answered on May 04, 2019


Kenwood DNX573S 1 Search the unit ("DNX****") from your smartphone/cell-phone.
2 · Confirm the request both on the smartphone/cell-phone and the unit.
· Input the PIN code in your smartphone/cellphone.
PIN code is set to "0000" as the default.
3 Select the hands-free number to connect.
A name of a smartphone is displayed when it has handsfree connection with the unit.
By this way you can connect your bluetooth.

Kenwood Radio... | Answered on May 04, 2019


You check 5V and also change TL494 IC and your problem will solve.

Kenwood Radio... | Answered on May 02, 2019


Your language is not change, you Mark "Scrambler" you unmark it and you problem will be solve. Because if you mark it then you will not understand the receiving signal.

Kenwood Radio... | Answered on May 02, 2019


To resset the Transciver:

with the power off press and hold the ptt, side 1 and side 2 button and power ON. Keep press for 02 second until the light turn to orange.
The key must be release within 02 second after the LED light orange otherwise your resset procedure will cancel.
The transciever announce "confirm" and returne to normal operation.

Kenwood Radio... | Answered on Apr 25, 2019

Not finding what you are looking for?
Kenwood Kpg-128d V1.3 Programming Software Tk-2360 & Tk-3360 - Logo

0 questions posted

Ask a Question

Usually answered in minutes!

Top Kenwood Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1655 Answers

Jason

Level 2 Expert

218 Answers

Jaime Hernandez

Level 3 Expert

2337 Answers

Are you a Kenwood Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Kenwood Radio Communications

  • Kenwood Radio Communications

Most Popular Question

manual ubz am14

  • Radio Communications
Loading...