20 Most Recent Motorola Mag One Bpr40 Uhf 4w 8 Channel Two Way Business Radio Used Questions & Answers


It probably has "busy channel inhibit" turned on in the menus, and the squelch is open, thus making it think there is a signal on the channel you're trying to use.

Motorola Mag One... | Answered on May 04, 2014


It requires the radio programming program. You must take it to a dealer. It will cost a bit to be reprogrammed, call in advance.

Motorola Radio... | Answered on Oct 04, 2019


Entering Front Panel Feature and Button
Configuration Mode
If your radio is turned ON, turn it OFF. Press and hold the side
programmable button 1, and turn your radio ON. A tone is
heard, indicating that your radio is in Feature and Button
Configuration Mode. The indicator illuminates and the
"BCKLIGHT" is displayed on the radio LCD screen.

Whenever the radio is turn on, it initiates a self-test routine which checks the RAM, EEPROM
hardware and EEPROM checksum. If Self Test passes, the green LED flashes once and a Self-Test
Pass Tone is generated. If unsuccessful, the red LED flashes rapidly and a Self-Test Fail Tone is
heard

You may need the programing software to do the reset the manual does not give you any info on resetting the radio

Motorola Radio... | Answered on Oct 03, 2019


No. Your Talkabout radio operates on UHF and your wife's walkie talkie is a VHF radio operating on exclusive business frequencies.

Motorola Radio... | Answered on Sep 26, 2019


Hi PC Bedwell, check the battery charge, it may be needing to be replaced, likewise, control the charger
I hope you can solve the problem
Regards Franco Dosil

Hola PC Bedwell, comprueba la carga de las bater?as, puede estar necesitando ser reemplazadas, de igual manera, controla el cargador
Espero puedas resolver el problema
Saludos Franco Dosil

Motorola Radio... | Answered on Sep 20, 2019


Check your Private Line (aka interference eliminator code, tone code, PL, quiet call). It sounds like you have one radio set with a PL setting and the other one is open squelch (no private line). All settings for frequency and PL code need to be the same between the two radios.

We don't have a manual for the T3, but I am attaching one for the T5, which may be similar. http://www.motorola.com/web/Business/Products/Two-Way%20Radios%20-%20Unlicensed/_Documents/TLKR-T%20series/Static%20Files/T5%20Manual%20EU.pdf

Best regards.

Motorola Radio... | Answered on Aug 31, 2019


The CLS has preprogrammed frequencies. The Bao can be user programmed. If both are Uhf, the Bao must match the CLS unless one of the CLS frequencies is already in use in the Bao. So, are you already using CLS and adding radios? You need the actual frequency and tone code. If you do not understand, contact a dealer like us, local is even better! Channel 1 is only an indicator, not a frequency. radiodude365@yahoo.com

Motorola Radio... | Answered on Jun 16, 2019


Turn off your CTCSS or DTS functions. You will have to go into the set up menu for this.

Motorola Radio... | Answered on Jun 04, 2019


Long press P3 and check key sign will be goes OFF, now your keypad is unlock.

Motorola Radio... | Answered on May 31, 2019


You must have the RSS (radio service software) software and the correct cable. There is no resetting without these.

Motorola Radio... | Answered on Apr 15, 2019


Check your battery connections and/or batteries. It sounds like the radio is trying to perform the “power on” sequence, but doesn’t have enough power to actually power on. Use fresh from the package or other “known good” batteries, and clean the battery contacts with rubbing alcohol and a clean paper towel. If there is corrosion or other oxidation on the contacts, you may need to use an emery board and then the alcohol wipe. Beyond that, the radio is not really “user serviceable”. Is there any chance the malfunctioning radio was exposed to water?

Motorola Radio... | Answered on Mar 02, 2019


Radio Compatibility: Which Models Will Work Together - Buy Two Way ...


https://www.buytwowayradios.com/.../radio_compatibility_which_models_will_work...

Sep 11, 2008 - Why won't a Boafeng BF-888s work with a Boafeng ATR-22? ... Can you program a Motorola mag one BPR40 to receive on a BAOFENG BF-888S .how can I . Is it ... Would my Albrecht AE6890 work with Motorola XTN 446?

More info and videos
https://www.google.com/search?safe=off&ei=8odsXJukHOOJggf7nr-ACg&q=Baofeng+bf888s+to+Motorola+XTN

Motorola Radio... | Answered on Feb 19, 2019

Not finding what you are looking for?
Motorola Mag One Bpr40 Uhf 4w 8 Channel Two Way Business Radio Used Logo

1 questions posted

Ask a Question

Usually answered in minutes!

Top Motorola Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1655 Answers

Anthony Ward
Anthony Ward

Level 2 Expert

396 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Motorola Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Motorola Radio Communications

  • Motorola Radio Communications

Most Popular Question

mt mag one bpr40 uhf 450 470 will

  • Radio Communications
Loading...