Lexmark X9350 Printer - Answered Questions & Fixed issues


Hello. I am going to talk you through the process to remove your old printer driver and then download and run your new printer driver. go to this site: http://support.lexmark.com/index?locale=en&segment=DOWNLOAD&startover=y&userlocale=EN_US&question=x9350+driver&productCode=LEXMARK_X9350&page=answers&detectedProductFacet=CMS-CATEGORY_REF.LEXMARK.PRODUCTS.ALLINONE.LEXMARK_X9350&searchid=1260945823003#1
Begin at the top where it says upgrade to windows 7 in red. click on that. then just follow the prompts and you will be all set. Regards, Joe

Lexmark X9350... | Answered on Jan 14, 2016 | 235 views


That must be an error in the website developer. Odd to say the least.

You have a couple options:

1) Call 1-800-LEXMARK (539-6275) for order help. I am sure they will be able to get you your request. Explain to them the problem and hopefully they will correct it. Mention Part#: 18Y0372.

2) Try another vendor, such as Staples.com, Buy.com, officedepot.com, or inkjetsuperstore.com.

Thanks for using Fixya.

Lexmark X9350... | Answered on Nov 21, 2009 | 36 views


make sure you have removed protective tape on cartridge, and that it is firmly snapped into place.

Lexmark X9350... | Answered on Aug 01, 2009 | 70 views


Hi,

If the printer is connected via usb check your cables first, make sure they are fully connected on both ends. Next check to see if the computer is recognizing the printer. Turn the printer off for about 10-15 seconds, then power it up. A message should pop in the lower right corner near the clock saying that the printer was detected. If nothing shows up, try going to your printer and faxes menu on the computer and try to reinstall the printer or just the drives themselves. Sometimes drivers get corrupted and the easiest thing to do is to replace them. DO NOT DELETE ANY PRINTERS until you can print from the computer

Lexmark X9350... | Answered on Jul 31, 2009 | 35 views


Please make sure the print head is seating properly as it should.
Another reason could be the contacts of the print head are not connecting properly with the main printer due to dirt. Remove the print head, clean the contacts of the print head and where it seats at the printer. hope this will help

Lexmark X Office... | Answered on Jul 17, 2016 | 57 views


Download from here Valerie
http://www.siliconguide.com/drivers/device/130/

Lexmark X Office... | Answered on May 08, 2016 | 31 views


Here is a manual for the same. In case you are unable to do it, please call on 1-877-805-1027 for further assistance.

http://www.lexmark.com/publications/pdfs/lexmarkj110/eng/clean.pdf

Lexmark X Office... | Answered on Jan 12, 2016 | 100 views


Yes it is true machine will print because its maybe need some type of repairing or the machine is not a printer of a photocopy

Lexmark X Office... | Answered on Dec 19, 2015 | 44 views


The problem with XP is that its not support by any new printers. However, you may be able to use the universal HP PLC5 driver to run the Lexmark.. According to Lexmark windows XP is a supported OS for this printer. Go to the Lexmark site, support and download the driver. Here is the link
support lexmark com

Advanced Business Computers specializes in printer copier network support and maintenance.

Printer Repair Service in Miami and Fort Lauderdale FL

Lexmark X Office... | Answered on Nov 24, 2015 | 237 views


sadly that is not a function with magicjack phone .

Lexmark X Office... | Answered on Sep 24, 2015 | 43 views


Go to 'control panel/printers'

Lexmark X Office... | Answered on Sep 11, 2015 | 50 views


Make Your Selection

Try the lexmark support

Lexmark X Office... | Answered on Aug 16, 2015 | 37 views


it has to be a lexmark cartridge,not a refilled or generic cartridge,if it is a lexmark,take it back to the store and tell them

Lexmark X Office... | Answered on May 06, 2015 | 50 views


Hi,

I assume you meant a Lexmark Z735 printer.

This is an older printer, but the printer may work with Windows 7 Home Premium, Professional or Ultimate. You can try to install the driver for Windows Vista, BUT MAKE SURE you install the correct driver for your system. Check to see if you have a 32 bit or 64 bit system and install the appropriate driver. Check this link first:

www.microsoft.com/windows/compatibility/windows-7/en-us/Search.aspx?s=Lexmark%20Z735&type=Hardware

You should uninstall the current driver first.

Then see these links:

Lexmark Z735 Driver http://support.lexmark.com/

Lexmark X Office... | Answered on Feb 23, 2015 | 120 views


You should change font in your text processor. Priter only prints as you format your text in your computer

Lexmark X Office... | Answered on Feb 10, 2015 | 83 views


here you have it:
Use Adobe Acrobat reader if you can't open it in the first place: http://www.lexmark.com/publications/pdfs/2007/x54x/v5404678_en.pdf

Lexmark X Office... | Answered on Jan 27, 2015 | 33 views


I guess you want to know how to open it up to change cartridges? Are you sure of model number? I cant find a thing on it.

Lexmark X Office... | Answered on Jan 27, 2015 | 32 views

Not finding what you are looking for?
Lexmark X9350 Printer Logo

Popular Tags

6 questions posted

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...