20 Most Recent Pioneer DVR-440HX-S DVD Recorder / HDD Recorder Questions & Answers


You have an issue with the programming circuitry in Pioneer.
Repair might just not be cost effective given labor and parts costs.

Pioneer... | Answered on Mar 19, 2017


Hi,

You could try looking on Pioneer's web site to see if a firmware download is available. This sort of thing can happen as time and technology moves on, a firmware update can be like giving your machine a bit of an upgrade and often rectifies issues like this. As for channel four and 5 doesn't everybodies EPG behave like that? I think it's to do with bandwidth in the digital signal, quite often you will notice that groups of channels will be affected at the same time these usually share the same area of bandwidth.

Regard, James

Pioneer... | Answered on Apr 22, 2010


Pioneer is not great about updates. Here is a link to the user manual. If has been purchased in the last year it should be up to date, and i would contact people where it was purchased.

https://www.pioneerelectronics.com/StaticFiles/Manuals/Home/BDP-31FD_OperatingInstructions0831.pdf

Pioneer... | Answered on Jul 17, 2019


Check out Amazon or ebay your bound to find it.

Pioneer... | Answered on Jul 10, 2019


first is to hear if sound is there when a DVD etc is connected to one of the rear audio and video inputs on the set.

Also check speakers in the set are in menu switched ON and not OFF.

If a cable box, sat box, receiver are in use check their settings for sound also==not a bad idea to unplug each unit and then after a few minutes plug each back (set , box, etc) to allow each to try to boot up.

Let me know what you find.

Pioneer... | Answered on Jul 02, 2019


Hello Socorro, for what you are saying, your Pioneer is not ventilating the heat produced by the circuits, internally your TV has a series of internal fans, to cool the heat produced by the circuits
I suggest you communicate with a specialized technical service
I hope you can solve the problem
Greetings Franco Dosil

Hola Socorro, por lo que comentas, tu Pioneer no esta ventilando el calor producido por los circuitos, internamente tu TV tiene una serie de ventiladores internos, para enfriar el calor producido por los circuitos
Te sugiero que te comuniques con un servicio tecnico especializado
Espero puedas resolver el problema
Saludos Franco Dosil
http://www.pioneerelectronics.com/pio/pe/images/portal/cit_11221/290938192PDP42A3HD_US_0420.pdf

Pioneer... | Answered on May 26, 2019


Hello Michael, indicate the model of your TV pioneer
Test if the remote control works, remove the batteries, observe the contacts of the batteries, which are clean, otherwise, clean them so that the batteries make good contact
Once the batteries and contacts have been checked, put them back
Take your cell phone, put it in camera mode and point the emitter LED of the remote control to the camera, press the keys and see if the emitting LED lights up, if so, try directly with the TV
if it does not turn on, you could carefully disassemble the remote control and clean the contacts and the rubber keyboard internally, Do not Use Alcohol to clean
the rubber keyboard, you can clean it with warm water and detergent then let it dry very well, the contact plate, you can use a cloth with a little liquid to clean the glasses, the idea is to remove the rubber residue that is on the contacts
then arm again and try, if not you have results consult a specialized technical service and if you try, you see in the camera that the LED turns on, but the TV does not, then it takes the two devices to the specialized technical service
I hope you can solve the problem
Greetings Franco Dosil

Hola Michael, indica el modelo de tu TV Pioneer
Prueba si te control remoto funciona, s?cale las pilas, observa los contactos de las pilas, que se encuentren limpios, sino es as?, limpialos para que las pilas hagan buen contacto
Una vez controlado las pilas y contactos,vuelve a colocarlas
Toma tu celular, pon en modo c?mara y apunta el Led emisor del control remoto hacia la c?mara, presiona las teclas y f?jate si se ilumina el Led emisor, si es as?, prueba directamente con el TV
sino prende, podr?as desarmar con cuidado el control remoto y limpiar internamente los contacto y el teclado de goma, No Uses Alcohol para limpiar
el teclado de goma, lo puedes limpiar con agua tibia y detergente luego d?jalo secar muy bien, la placa de los contacto, puedes usar un pa?o con un poco de liquido para limpiar los vidrios, la idea es sacar el residuo de goma que hay sobre los contactos
luego arma nuevamente y prueba, sino tienes resultados consulta a un servicio t?cnico especializado y si pruebas, ves en la c?mara que el Led se enciende, pero el televisor no, entonces lleva los dos aparatos al servicio t?cnico especializado
Espero puedas resolver el problema
Saludos Franco Dosil

Pioneer... | Answered on May 23, 2019


Hello Michael, indicate the model of your TV pioneer
Test if the remote control works, remove the batteries, observe the contacts of the batteries, which are clean, otherwise, clean them so that the batteries make good contact
Once the batteries and contacts have been checked, put them back
Take your cell phone, put it in camera mode and point the emitter LED of the remote control to the camera, press the keys and see if the emitting LED lights up, if so, try directly with the TV
if it does not turn on, you could carefully disassemble the remote control and clean the contacts and the rubber keyboard internally, Do not Use Alcohol to clean
the rubber keyboard, you can clean it with warm water and detergent then let it dry very well, the contact plate, you can use a cloth with a little liquid to clean the glasses, the idea is to remove the rubber residue that is on the contacts
then arm again and try, but if you have results consult a specialized technical service and if you try, you see in the camera that the Led is turned on, but the TV does not, then it takes the two devices to the specialized technical service
I hope you can solve the problem
Greetings Franco Dosil

Hola Michael, indica el modelo de tu TV Pioneer
Prueba si te control remoto funciona, s?cale las pilas, observa los contactos de las pilas, que se encuentren limpios, sino es as?, limpialos para que las pilas hagan buen contacto
Una vez controlado las pilas y contactos,vuelve a colocarlas
Toma tu celular, pon en modo c?mara y apunta el Led emisor del control remoto hacia la c?mara, presiona las teclas y f?jate si se ilumina el Led emisor, si es as?, prueba directamente con el TV
sino prende, podr?as desarmar con cuidado el control remoto y limpiar internamente los contacto y el teclado de goma, No Uses Alcohol para limpiar
el teclado de goma, lo puedes limpiar con agua tibia y detergente luego d?jalo secar muy bien, la placa de los contacto, puedes usar un pa?o con un poco de liquido para limpiar los vidrios, la idea es sacar el residuo de goma que hay sobre los contactos
luego arma nuevamente y prueba, sino tienes resultados consulta a un servicio t?cnico especializado y si pruebas, ves en la camara que el Led se enciende, pero el televisor no, entonces lleva los dos aparatos al servicio t?cnico especializado
Espero puedas resolver el problema
Saludos Franco Dosil

Pioneer... | Answered on May 23, 2019


Google the manual or try the manufacturers web site for it if there are no external control buttons.

Pioneer... | Answered on May 19, 2019

Not finding what you are looking for?
Pioneer DVR-440HX-S DVD Recorder / HDD Recorder Logo

11 questions posted

Ask a Question

Usually answered in minutes!

Top Pioneer Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76100 Answers

Jaime Hernandez

Level 3 Expert

2337 Answers

Marvin
Marvin

Level 3 Expert

85160 Answers

Are you a Pioneer Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Pioneer Televison & Video

  • Pioneer Televison & Video

Most Popular Question

pioneer dvr 440hx s dvd recorder hdd

  • Televison & Video
Loading...