20 Most Recent Phoenix Gold XS2300 Car Audio Amplifier Questions & Answers


LPF is typically Low Pass Frequency, it puts the amp in a state where only low frequency signals will pass thru to the speakers. LPL is for Low Pass Level control, that is used on PG products that have an LPL port. Using a phone style cable and a 50k potentiometer you can control the level of the amp's output.

Phoenix Gold... | Answered on Apr 27, 2019


You have 3 sets of wire connecting to the amp (besides the rca connection), Red is power from the battery, Black is the round wire (shorter the better), lastly Blue is the remote turn on wire. Without the remote turn on, your amp will not power up regardless of the power from the battery.

RCA connectors are for your audio, it carries the noise signal to your amp from the head unit...

Phoenix Gold... | Answered on Mar 21, 2011


See manual for your amp posted here
http://download.phoenixphorum.com/Manuals/Amplifiers/XS/xs2300blk.pdf

Power is the B+ terminal, Ground is the B- terminal. The small terminal in-between them is the remote turn-on.

Phoenix Gold... | Answered on Jan 28, 2011


did u try an music shop

Phoenix Gold... | Answered on Oct 17, 2010


Possible that the audio output section is short . remove speakers and fix in the fuse to test, if itt blows out the fault must be confirmed by opening of the amp and disconnection of the power output driver.If teh fuse then stays the fault is confirmed. replace and test the speakers in this section before connecting.

Phoenix Gold... | Answered on Aug 30, 2010


Hey there newton,

Looks to be just over 300Watts. MSRP is $220.00 but they can be had for $100.00 to $150.00

Click here for a review.

Best regards
Mike

Phoenix Gold... | Answered on Aug 02, 2010


http://download.phoenixphorum.com/Manuals/Amplifiers/XS/xs4chan.pdf

Phoenix Gold... | Answered on Jun 12, 2010


Ok for best results.
1.make sure you agust the gain according to person prefrences.
2make sure you set the crossover on the amp.ok in your speakers the would probley sound best if you set the Low pass fillter at 50hz and the high pass fillter at 25khz (if you have one) or on your headunit

Hope this gets the results you want.

Alex

Phoenix Gold... | Answered on Nov 29, 2009


First I hope you remove the speaker wires from the speaker that come from the built in amplifire. You cannot hook the powered sub to the amp without doing that first. Then all you need to do is run speaker wire from the sub out of the box to the amp. In no way can you hook up any other part of the powered sub, but the sub itself, to the amp. If you know the wattage of the sub and the ohms then wire it to the amp correctly. Your phoenix amp will put out 125 watts x 2 at 4 ohms and 250 watts x 2 at 2 ohms and 500 watts x 1 at 4 ohms bridged. Remember, only the sub itself in the sub enclosure can be connected to the amp. Hope this helped you. Let me know if you need more help.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/mark_b53a7494531bf96d

Phoenix Gold... | Answered on Aug 23, 2009


there is something touching or shorting out..could be speaker wire inputs on the inside..if you have it crossed over you could have it backwords or you could have a short in your RCA's..

Phoenix Gold... | Answered on Dec 04, 2008


Request the diagram directly from Phoenix Gold.

Phoenix Gold Car... | Answered on May 05, 2019

Not finding what you are looking for?
Phoenix Gold XS2300 Car Audio Amplifier Logo

23 questions posted

Ask a Question

Usually answered in minutes!

Top Phoenix Gold Car Audio & Video Experts

Mark Skinner

Level 2 Expert

79 Answers

Jeffery Lewis
Jeffery Lewis

Level 3 Expert

329 Answers

colinjhought

Level 2 Expert

126 Answers

Are you a Phoenix Gold Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Phoenix Gold Car Audio & Video

  • Phoenix Gold Car Audio & Video

Most Popular Question

power wires 3

  • Car Audio & Video
Loading...