20 Most Recent HP Deskjet F335 All-In-One InkJet Printer Questions & Answers


The first thing I would check is the cable. If you're using a USB connection, try a different (and known to be good) USB cable. If that doesn't do it, you may have a damaged USB connection socket at the printer, which is not cost effective to repair.

Hope that's helpful.

HP Deskjet F335... | Answered on Oct 13, 2018


HP Deskjet F335 Manuals see if this site can help you out.

HP Deskjet F335... | Answered on Oct 29, 2016


You need to clean the print head until the smears clear up

HP Deskjet F335... | Answered on Dec 04, 2015


Try to check for strange like paper , try t remove ink and restart printer
when ask for installing ink , install them , i hope helping you

HP Deskjet F335... | Answered on Mar 26, 2013


Hi Linda,

Orange light blinks if one of more cartridge is empty. Check which one is empty and replace it

Regards,
Sean

HP Deskjet F335... | Answered on Mar 03, 2013


Unfortunately there is no way to reset the electronics on this type of cartridge so your printer will always think they are empty. If the light flashes and you can still print, then just ignore the flashing. If your printer won't allow you to print, then the cartridge electronics must be bad. If the electronics are bad, there is nothing you can do to rescue the cartridge and you need to get a new one. I would return the cartridge to where you purchased it from and instead see if you have a Cartridge World store in your area. These stores would not sell you a refilled cartridge with bad electronics.

HP Deskjet F335... | Answered on Oct 27, 2012


Can you specify which error it is giving you?

HP Deskjet F335... | Answered on Aug 07, 2012


Hi
Check for paper jam on your printer.
Look through the paper paths and remove any obstructions.
Try turning the printer off and on.
Disconnect it from power and then re-connect after a while.

HP Deskjet F335... | Answered on Mar 02, 2012


Open the printer with the four corner screws.
reviews the large gear on the left, must be fixed to the shaft, or gear swept the break with use.
Any of these 2 solutions can help you, are most common.
another may also be that the rubber is worn separation, this is a line of orange or green you can see from the back when you remove the paper guide, if the rubber has a wear mark, ideally change or lowering the mark with friction.
Good luck.
Note:

for better review of mechanisms, it should remove the rail which moves the carriage. are 5 screws. easy

HP Deskjet F335... | Answered on Feb 29, 2012


Are you sure in printing or copying?.. If its copying its CCD(scan head)faulty.. if you are getting in printing trailing cable faulty.(the cable carried data from the logic boar to carriage pcb)

HP Deskjet F335... | Answered on Feb 02, 2012

Not finding what you are looking for?
HP Deskjet F335 All-In-One InkJet Printer Logo

147 questions posted

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

DeskJet HP

  • DeskJet HP

Most Popular Question

ubutu install hp deskjet f335

  • Office Equipment & Supplies
Loading...