20 Most Recent
Questions & Answers
My little green machine won't spray the solution but it will pick
We had the same problem. After dissassembling the whole machine we could not find a clog or any other obvious problem. The manual suggests priming the pump by putting the solution reservoir in and out a few times. This did not help much. What did work was to raise the unit up a few feet above the trigger while depressing the holding the spray trigger. (That is, use gravity to fill the tube.) After solution was flowing freely, we turned the machine on and it seems to spray fine again.
Hope this helps
on Jul 01, 2019
No heat on my Bissell Little green ProHeatTurbobrush
I get paid over $90 per hour working from home with 2 kids at home. I never thought I'd be able to do it but my best friend earns over 10k a month doing this and she convinced me to try. The potential with this is endless. Heres what I've been doing, .......... http://www.GeoSalary.com
on Oct 13, 2019
Why is my Bissell quicksteamer dirty water not going into tank
What worked for me is - put some water into the dirty water tank before you run it. My experience was, if I ran the machine with an empty dirty water tank, it stayed empty and didn't pull in any dirty water. If I put a little water in it beforehand, it helped seal the suction and get the thing started. Hope this helps!
on Sep 04, 2019
Not finding what you are looking for?