20 Most Recent Canon PIXMA MX310 All-In-One Printer Questions & Answers


Go to Start/Control Panel/Printers and faxes. Right click on the Canon icon and click on Offline turn toggle it back to Online. Please rate this answer.
Cheers
Bob

Canon PIXMA... | Answered on Aug 30, 2019


Error 6000 is a service call error, meaning that the printer needs to be taken into a canon authorized service facility for repair.

This is a line feed error, with the problem originating from the timing **** disk film or the printer's logic board.

Canon PIXMA... | Answered on Aug 19, 2019


Error Code 300 is displayed.

1) Cause : The machine not ready.

Action : Confirm that the power lamp is green.
If the power lamp is off, turn the machine on.
While the power lamp is flashing green, the machine is initializing. Wait until the power lamp stops flashing and remains green.
If the Alarm lamp is orange, an error may have occured on the machine.

2) Cause : Machine is not connected properly.
Action : Make sure that the USB cable is securely plugged into the machine and the computer.
* if you are using a relay device such as USB hub, disconnect it, connect the machine directly to the computer, and try printing again. If printing start normally, there is a problem with the relay device.
Consult the reseller of the relay device for details.

* There could be a problem with the USB cable. Replace the USB cable and try printing again.

3) Cause : Your machine is not selected in Printer on the Print dialog box.
Action : Select your machine's name in the printer on the Print dialog box.

If your machine name doesnot appear in Printer, follow the procedurebelow to check that the driver for your machine is installed on your computer.
a) Select Print & Fax Preferences in Printer.
In Mac OS X. v.10.2.8 or 190.3.x, select Edit Printer List in Printer.
b) Check that your machine's name is displayed in the list of printers and that the check is selected.
In Mac OS.X v.10.2.8, check that your machine;s name is displayed in printer list.
c) If your machine's name is not displayed, click Add(+) to add the machine. If you cannot add the machine, follow the procedure described in youe setup sheet to reinstall the MP drivers.

Canon PIXMA... | Answered on Aug 08, 2019


use the PS driver for that

Canon PIXMA... | Answered on Jul 19, 2019


hi..
Error 6000 is a service call error, meaning that the printer needs to be taken into a canon authorized service facility for repair.

This is a line feed error, with the problem originating from the timing disk film or the printer's logic board..

thank u
rate me!!

Canon PIXMA... | Answered on Jun 10, 2019


  • Click Start and then click Printers and Faxes to open the Printers folder.
  • If the desired printer icon is missing, please go to Step two.
  • Make sure the desired printer has a check mark next to it which indicates it is set as the default printer.
  • If the desired printer does not have a check mark next to it, right-click the printer icon and then click "Set as Default Printer".
  • Right-click the printer icon, and then click Print Test Page to print a Windows self-test page.
  • If the Windows test page prints successfully, close all windows and try printing from the application you were using before.
  • If the Windows test-page does not print, go to Step two.
  • Step two: Re-install the USB Composite Device from Device Manager
aFor more help visit cbrtechsolutions

Canon PIXMA... | Answered on Jun 04, 2019


Check the print head. Get a cloth and clean out the print head area.

Canon PIXMA... | Answered on Jan 10, 2019


This will clear your printer from displaying common printer errors like U053, U051 and U052. The importance of the "reset the cartridge" procedure is to avoid the printer from detecting your cartridge as reused one. The steps below is recommended to do after refilling an ink cartridge.
1. Turn off your printer
2. Press and hold the STOP/RESET button
3. Press and hold Power ON button
4. While holding the Power ON button, release the STOP/RESET button
5. While holding still the Power ON button, press twice the STOP/RESET button
6. Release the Power ON button
7. Wait until it display an "idle" message. It will take about a minute.
8. When "idle" appear, open the top cover to expose the cartridges.
9. Lift up the cover for cartridge holder and take out both the black and color cartridges
10. Return the cover of cartridge holder and turn off the printer
11. Return the top cover and turn on the printer again
12. After the printer initialize, return the cartridges.

What happened when ink ran out from a refilled cartridge and the printer detected it?
The printer will display an error U162 or U163. All functions of the all-in-one printer will stop and your printer will not work. The next thing you will know is you are in the front of a computer shop and buy a genuine canon cartridge.
But wait, there is still a way to fix this. Reset it again using a different procedure. Reset the detections of reusable cartridge.
1. Turn off your printer an turn it on again
2. After the printer initialize try to copy or print. The error will appear.
3. When the error is displayed on the display panel of the printer, Press and Hold the STOP/RESET button and wait until it self restart.
4. Release the STOP/RESET button the the printer is restarting.
5. Wait for a few seconds and the pending print jobs will commence.

Let me know if this works with you
Please rate this solution. Thanks

Canon PIXMA... | Answered on Dec 17, 2018


"Gclanton" had it right.
I had the same problem today. I ended up taking a piece of paper and from the back side started lightly forcing the paper in the back slot. I had the top cover open where you replace the ink cartridges. Towards the back you can see the paper start coming into the printer next to some rollers. On mine there was a small black switch about an inch from the right in the middle of the plastic piece above the rollers. Once I started pushing this paper in I could see this switch was stuck in the down position. After several minutes of pushing the paper in and out the switch moved up and out of the paper path. I then pulled out the paper and hit the ok button and it came on line. This may work better with a piece of card stock.
That switch is the issue.  I ended up finding an object lodged against the switch.  Needed a flashlight, plastic giftcard and a tweezers to get it out.  Works great now.

Canon PIXMA... | Answered on Dec 11, 2018


Try the below website. It is especially for Canon.
http://www.fixyourownprinter.com/forums/inkjet/42085

Hope this helps and works as it has worked for many others too. I am one of them.

Canon PIXMA... | Answered on Dec 01, 2018


Hi
You don't need the CD, just go to this site: Driver Update and use their software to update your driver.
Wish you best of luck
Simon

Canon PIXMA... | Answered on Oct 13, 2018


I hope this link helps you to solve your issues http://ugp01.c-ij.com/ij/webmanual/Manual/W/MX450%20series/EN/FAX/FAX_Receiving0920.html

Canon PIXMA... | Answered on Aug 21, 2018


Hi
Error 6A00
The 6A00 is a Canon generic code for paper path jam.

Solution 1:
Move the printhead carriage back and forth a few times.

Solution 2:
Check the purge unit: Moving the print head assembly will not clear a purge unit if its jammed with paper, paper clips, push pins, screws, cookie crisp, flower bud pods or the like.

Solution 3:
Press the ink pads down in the purge unit.


All I ask is please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Canon PIXMA... | Answered on Aug 02, 2018


Hi. That kind of software is almost impossible to get. Search in youtube there are a lot of tutorials about that toic

Canon PIXMA... | Answered on Feb 28, 2018


Hi have you tried to send faxes to another number ?

Canon PIXMA... | Answered on Feb 19, 2018


PIXMA MX310


Manuals and phone number and email address for Canon support.

Canon PIXMA... | Answered on Jan 27, 2018


  • Sometimes there are other problems by some model printers, buy new cartridges if its needed there is an reset by software and hardware. chipproblem on the cartridge by oxyd, then sometimes it could help to clean the brass contacts on the cartridge . to be sure thats not the fault.
  • reset canon mx310 Google Search

Canon PIXMA... | Answered on Jan 27, 2018

Not finding what you are looking for?
Canon PIXMA MX310 All-In-One Printer Logo

2,559 questions posted

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

old marine
old marine

Level 3 Expert

2254 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

PIXMA Canon

  • PIXMA Canon

Most Popular Question

canon pixma mx330 all in one printer

  • Office Equipment & Supplies
Loading...