20 Most Recent Microsoft Windows Vista Ultimate Edition Questions & Answers


Hi,

Can you try this:
  • Start-> Control Panel->Hardware and Sound
  • Sound / Manage Audio Devices
  • Highlight your audio device
  • Properties
  • Advanced
  • In the Exclusive Media section, UNCHECK the box "Allow applications to take exclusive control of this device."
  • Apply

Hope this helps.
Thanks.

Microsoft... | Answered on Aug 16, 2019


if you have same OS (operating system) disk or recovery disk which has been currently installed in your PC/Laptop then follow these instructions:
insert your os or recovery disk in to cd/dvd drive then
go to Start>Run then type in "sfc /scannow" without quotes and hit enter.
it will takes few minutes to restore your all settings back (it just restores only OS settings so you wont lose any files and folders) so just let it run until it's done.
once done just reboot system your system then you will be good to go.
Note: there is space between "sfc and /" so if you don't hit space then it wont let you go.
Thank you.

Microsoft... | Answered on Jul 12, 2019


Adobe Premiere

Microsoft... | Answered on Jul 04, 2019


You need to download latest driver for Vista. Here is the link that you can choose your product and download driver for Vista
http://www.m-audio.com/index.php?do=support&tab=driver

Good Luck
Was this solution helpful? Show your Appreciation by rating it:

Microsoft... | Answered on Jun 26, 2019


It will depend on PC operating sys. The 'cutting' drivers as you put it, work through the design software, so once againg it depends what your using

Microsoft... | Answered on Jun 26, 2019


upload

Microsoft... | Answered on May 22, 2019


Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6002.2.2.0.768.2
Locale ID: 1057

Additional information about the problem:
BCCode: f4
BCP1: 00000003
BCP2: 8A7FE5A0
BCP3: 8A7FE6EC
BCP4: 839F1DC0
OS Version: 6_0_6002
Service Pack: 2_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\Mini013111-01.dmp
C:\Users\PORTEGE PC\AppData\Local\Temp\WER-87235-0.sysdata.xml
C:\Users\PORTEGE PC\AppData\Local\Temp\WERFD61.tmp.version.txt

Microsoft... | Answered on Apr 29, 2019


Hi there,
I can play .vob files with a cool media player called VLC player, which plays everything I throw at it. I recommend you download it from here:

http://www.videolan.org/vlc/

and when you install it, set the File Associations to play everything with VLC, that'll let you double click on a .vob file and play it automatically.
VLC has a much lighter 'footprint' than Windows Media Player, or Nero or many DVD players,and has amazing codec-support already included.
If the .vob files are encrypted, then maybe that is slowing down your laptop, but that is not the only reason for this to happen.
If it still restarts automatically, you may have picked up malware from downloaded movies, and need to download Spybot and scan and immunize your hard drive. Spybot is completely free. Trust me, i don't like paying for things :)
It's also possible that you need to clean up your registry and your drive with a free program called ncleaner. you can find that here:
http://www.nkprods.com/ncleaner/

I suspect you will be successful with VLC player, though. Enjoy your movies :)

Chris

Microsoft... | Answered on Apr 18, 2019


Use VLC player to play any kind of video files

Microsoft... | Answered on Apr 16, 2019


java editor is a text editor which probably understands java language synthax and can automatically call java to compile your code.
Java software is a program written in Java programming language which is interpreted/executed by JVM(JAva virtual machine) on a target computer.
Your question is a rough equivalent to : What is a difference between typewriter and a recipe book written in English language

Microsoft... | Answered on Apr 12, 2019


ok liscense doesnt expire you just need to register your system

Microsoft... | Answered on Jan 26, 2019


ok...first u must format your hardisk...then install windows vista without entering it's cdkey...after completed installing, u have 30days to verify your vista....just go to my computer icon and click right to choose properties...at the bottom screen shown next is windows activation..enter your product key there while connecting to internet...from there u can verify your original cdkey...hopes it help... ; )

Microsoft... | Answered on Dec 27, 2018


There is probably a compatibility problem with mail and outlook.

What about installing Outlook onto your Vista computer?

Microsoft... | Answered on Dec 06, 2018


Could you download and run the program Dial-a-fix from http://www.softpedia.com/get/System/System-Miscellaneous/Dial-a-fix.shtml

I have tried this with many computers and it worked all the time.

Microsoft... | Answered on Oct 24, 2018


ISI is a quality standard certificate in India allotted by Indian Standards Institute.This mark certifies that the product or services comply with the standards specified by Indian Government and and is developed as per the standards of Bureau of Indian Standards (BIS). Most of the electrical appliances and kitchen accessories are required to have ISI certification.
https://www.gsbtaxation.com/in/isi-certification-consultants-in-bangalore/
isi-registration-local-page-image-5nk30auhgfc0ww4h20f550qi-3-0_3.jpg

Microsoft... | Answered on Sep 17, 2018


Backup your data files (external hard-drive or burn some DVDs).
Then, reinstall Vista -- much quicker than trying to "trouble-shoot".

Microsoft... | Answered on Jul 13, 2018


First step is to check if the file sharing option is checked in my computer folder options.

Start- My computer- TOOLS - FOLDER OPTIONS- and click on the second tab VIEW- scroll down to the last option which will show as USE SIMPLE FILE SHARING.

Level 1: My Documents (Private) loadTOCNode(3, 'moreinformation'); The owner of the file or folder has read and write permission to the file or folder. Nobody else may read or write to the folder or the files in it. All subfolders that are contained in a folder that is marked as private remain private unless you change the parent folder permissions.

If you are a Computer Administrator and create a user password for your account by using the User Accounts Control Panel tool, you are prompted to make your files and folder private.

Note The option to make a folder private (Level 1) is available only to a user account in its own My Documents folder.

To configure a folder and all the files in it to Level 1, follow these steps:
  1. Right-click the folder, and then click Sharing and Security.
  2. Select the Make this Folder Private check box, and then click OK.
Local NTFS Permissions:
  • Owner: Full Control
  • System: Full Control
Network Share Permissions:
  • Not Shared
Level 2 (Default): My Documents (Default) loadTOCNode(3, 'moreinformation'); The owner of the file or folder and local Computer Administrators have read and write permission to the file or folder. Nobody else may read or write to the folder or the files in it. This is the default setting for all the folders and files in each user's My Documents folder.

To configure a folder and all the files in it to Level 2, follow these steps:
  1. Right-click the folder, and then click Sharing and Security.
  2. Make sure that both the Make this Folder Private and the Share this folder on the network check boxes are cleared, and then click OK.
Local NTFS Permissions:
  • Owner: Full Control
  • Administrators: Full Control
  • System: Full Control
Network Share Permissions:
  • Not Shared
Level 3: Files in shared documents available to local users loadTOCNode(3, 'moreinformation'); Files are shared with users who log on to the computer locally. Local Computer Administrators can read, write, and delete the files in the Shared Documents folder. Restricted Users can only read the files in the Shared Documents folder. In Windows XP Professional, Power Users may also read, write, or delete any files in the Shared Documents Folder. The Power Users group is available only in Windows XP Professional. Remote users cannot access folders or files at Level 3. To allow remote users to access files, you must share them out on the network (Level 4 or 5).

To configure a file or a folder and all the files in it to Level 3, start Microsoft Windows Explorer, and then copy or move the file or folder to the Shared Documents folder under My Computer.

Local NTFS Permissions:
  • Owner: Full Control
  • Administrators: Full Control
  • Power Users: Change
  • Restricted Users: Read
  • System: Full Control
Network Share Permissions:
  • Not Shared
Level 4: Shared on the Network (Read-Only) loadTOCNode(3, 'moreinformation'); Files are shared for everyone to read on the network. All local users, including the Guest account, can read the files. But they cannot modify the contents. Any user can read and change your files.

To configure a folder and all the files in it to Level 4, follow these steps:
  1. Right-click the folder, and then click Sharing and Security.
  2. Click to select the Share this folder on the network check box
  3. Click to clear the Allow network users to change my files check box, and then click OK.
Local NTFS Permissions:
  • Owner: Full Control
  • Administrators: Full Control
  • System: Full Control
  • Everyone: Read
Network Share Permissions:
  • Everyone: Read
Level 5: Shared on the network (Read and Write) loadTOCNode(3, 'moreinformation'); This level is the most available and least secure access level. Any user (local or remote) can read, write, change, or delete a file in a folder shared at this access level. We recommend that this level be used only for a closed network that has a firewall configured. All local users including the Guest account can also read and modify the files.

To configure a folder and all the files in it to Level 5, follow these steps:
  1. Right-click the folder, and then click Sharing and Security
  2. Click to select the Share this folder on the network check box, and then click OK.
Local NTFS Permissions:
  • Owner: Full Control
  • Administrators: Full Control
  • System: Full Control
  • Everyone: Change
Network Share Permissions:
  • Everyone: Full Control
Note All NTFS permissions that refer to Everyone include the Guest account.

All the levels that this article describes are mutually exclusive. Private folders (Level 1) cannot be shared unless they are no longer private. Shared folders (Level 4 and 5) cannot be made private until they are unshared.

If you create a folder in the Shared Documents folder (Level 3), share it on the network, and then allow network users to change your files (Level 5), the permissions for Level 5 are effective for the folder, the files in that folder, and the subfolders. The other files and folders in the Shared Documents folder remain configured at Level 3.

Microsoft... | Answered on May 22, 2018

Not finding what you are looking for?
Microsoft Windows Vista Ultimate Edition Logo

5,173 questions posted

Ask a Question

Usually answered in minutes!

Top Microsoft Computers & Internet Experts

Ekse

Level 3 Expert

13434 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Alun Cox

Level 3 Expert

2679 Answers

Are you a Microsoft Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

VISTA Microsoft

  • VISTA Microsoft

Most Popular Question

download e mail from yahoo account

  • Computers & Internet
Loading...