20 Most Recent
Questions & Answers
Lexmark x646e error 298.02 scanner missing, cable unplugged.
Who ever thinks it is a software (as in computer driver) problem, you need to read what the problem was and the steps already taken to solve.
As you can see it is clearly to do with the cables and is a common problem with these copiers. We have three in shop right now with same issues!
The areas to look at are the cable connectors for damage, if you are technical you can open the adf plastic covers, and follow your scanner cables make sure no "pinching" has occured.
Other than that you can try factory reset, although this rarely works for this problem.
Refurbished units are retailing arond $350-400 all over google.
on Jul 12, 2013
Knocking noise when printing
Check the following:
1. DC motor assembly.
Make sure all the motor plate mounting screws are tight.
2. Idler pulley - DC motor assembly.
Make sure the idler pulley is not binding on the pulley shaft. Check the pulley for wear. Check the idler pulley shaft on the motor mounting plate for damage or contamination.
3. Drive pulley.
Check the drive pulley for wear, binds or damage to the pulley or pulley shaft. Make sure the pulley turns freely on the pulley shaft.
4. Motor drive belt - tray drive belt.
Check the DC motor drive belt for damage. Make sure the belt is tracking correctly on the drive pulley, idler pulley, and motor pulley. Check the tray drive belt for damage. Make sure the belt is tracking correctly on
on Dec 12, 2012
Not finding what you are looking for?