20 Most Recent Omega 1000 Juice Extractor Questions & Answers


Getting the old one out is the hardest part if the arm was broken off like mine. First locate the rectangular part where the arm attaches to the case. If the old arm, or most of it, is still attached, grasp it and pull firmly away from the case until you hear a click. Then, still pulling it away from the case, push it up toward the top of the case until it slides out. If the arm is broken off you have to pry it from the top until you hear the click. I used a small paring knife. Once you get it this far, wedge something like a toothpick behind it to keep it pulled away from the case. Then you need to push this push this part up. It is pretty tight so you might want to use some type of tool, like the blade of a flat screwdriver. Once you get the old one out, putting the new on in is just the reverse of taking the old one out.

Omega 1000 Juice... | Answered on Oct 03, 2019


Could be a defective breaker. That's what the "reset" is.

Omega 1000 Juice... | Answered on Jul 23, 2016


wait if you have the old 1000 the new latch arm will not fit i tried it but if you the new 1000 go to omegajuicersdirect.com and find parts and email paula for info

Omega 1000 Juice... | Answered on Nov 28, 2014


THE SOLUTION TO VIBRATING. If it spins up ok and starts vibrating suddenly as you are feeling it, here's the solution: feed it very, very, slowly. that's it. i couldnt figure mine out, then realized that if i fed it slowly, it was just fine.

Omega 1000 Juice... | Answered on Nov 01, 2013


Make sure the bottom of the feed chute is not damaged. If it,s chipped or scored, try filing
it down level as best you can. Then with the juicer fully assembled, unlock the set screw
on the center of the bottom and turn it clockwise until the chute contacts the blade, then
back it off a half turn and lock it down. By the way a dull worn blade will produce less
vibration. I'm assuming the lid is plastic.

Omega 1000 Juice... | Answered on Nov 01, 2013


There is no solution. These juicers do not eject the pulp and go out of balance very easily.
Don't feel bad, I've seen you tube videos where the demonstrator couldn't keep it under
control. If you are unable to master it, consider a pulp ejecting or masticating type juicer.

Omega 1000 Juice... | Answered on Apr 26, 2012


LOOK AT ALL THE OTHER JUICER`s they are not made that difffernt just put another drive on it and run the one that fits it !?

Omega 1000 Juice... | Answered on Aug 30, 2011

Not finding what you are looking for?
Omega 1000 Juice Extractor Logo

65 questions posted

Ask a Question

Usually answered in minutes!

Top Omega Juicers Experts

Andrew Taylor
Andrew Taylor

Level 3 Expert

29167 Answers

eyecam

Level 2 Expert

96 Answers

Tom Chichester

Level 3 Expert

54195 Answers

Are you an Omega Juicer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Omega Juicers

  • Omega Juicers

Most Popular Question

omega juicer 1000

  • Juicers
Loading...