Kodak EASYSHARE G610 Thermal Printer - Answered Questions & Fixed issues


Probably a piece of the old one is obstring it.

Kodak EASYSHARE... | Answered on Dec 25, 2017 | 50 views


Consult the Kodak company or Go to a nearby gadget technicians. I hope it could help you....

Kodak EASYSHARE... | Answered on May 13, 2017 | 227 views


It sounds funny but I have seen this so try it.Have you removed the protective strip on the contacts of the cartridge? the bare contacts must touch the printers.If I didn't see this happen I would not post it,it does.Many people in a rush to install make this mistake.Good Luck.

Kodak EASYSHARE... | Answered on Feb 19, 2013 | 91 views


printer doesnot print

Kodak EASYSHARE... | Answered on Sep 19, 2011 | 134 views


Hi,
Are you using a thermal paper when printing? If you are, then this most probably a problem printer head problem.
hope this helps.

Kodak EASYSHARE... | Answered on Jul 15, 2011 | 52 views


reinstall its drivers if it doesn't work then tell me i will tell you another solution thank you for your queston.

Kodak EASYSHARE... | Answered on Aug 19, 2010 | 34 views


the dock will not pick up paper lost my manual i tried one piece half full tray and afull tray it worked last time i printed what up
it keeps saing its out of paper

Kodak EASYSHARE... | Answered on Jul 20, 2010 | 258 views


Have you tried cleaning the print heads? The printer should have a function to do this...consult your manual would be my best guess

Kodak EASYSHARE... | Answered on Apr 16, 2010 | 112 views


ok! just make sure that you restart your printer and your computer to make sure that your drivers are recognizing your pc unit or laptop once thats done make sure that you do a test page on your printer and once that done make sure that the drivers work from your port on your printer try that and the hit me back..

Kodak EASYSHARE... | Answered on Mar 26, 2010 | 40 views


Had same prob with G600, all i had to do to get it working again was to clean the rollers with a damp cloth to get it working again.

Kodak EASYSHARE... | Answered on Dec 14, 2009 | 528 views


A lot of times you need to do more than clean sensors to get results. You are getting yellow and pink because either soe colours (blue & black) are dried at the nuzzle or finished.

The procedure am giving you below will determine which is the case.

Ink may be new, but their nuzzles may be blocked; depending on manner of storage. To be sure apply a folded tissue paper to the ink nuzzle and press firmly. If the tissue comes off well blotted with ink it means you still have a good amount of ink in it the nuzzle is not blocked. If not blotted or scantily blotted, it means ink is really low or nuzzle is blocked. To be very sure of this, place nuzzle in a plate/saucer with a bit water so that the nuzzle is soaked. Leave for about 10 minutes. Then apply the tissue again. If still not well blotted it means ink is really low or empty. If new you should return it for a replacement. In the case of blocked nuzzles, the procedure may be repeated over to get results.

Kodak EASYSHARE... | Answered on Dec 08, 2009 | 95 views


Replace the colour cartridge,
or use Windows to configure your printer to print "black only".

Kodak EASYSHARE... | Answered on Dec 08, 2009 | 64 views


Dont worry on that you can download your software and drivers and also the firmware of your g610., Just visit this website
kodak.com/go/G610support Now you can just click download software and firmware. for you to see the link of the drivers and firmware

Kodak EASYSHARE... | Answered on Nov 18, 2009 | 550 views


-Try to Unplug power cable for 10secs
-Remove paper try from the printer
-Make sure you are using the extralife paper or the thermal paper that came from the cartridge
-before you put the paper tray on the printer clean first all the rollers of the printer using a clean cloth
-Now if your done put it back now the paper tray
-Plug the power cable back
-Then do a test print.

If these solutions did not solve the issue please call kodak toll free 1 800 235 6325 and have it repair. GudlucK

Kodak EASYSHARE... | Answered on Nov 06, 2009 | 263 views


What a cam is it?

Most cams has pictbridge and you can connect them via an usb cable to the printer dock. Try it.

Kodak EASYSHARE... | Answered on Oct 09, 2009 | 47 views


can you check if you have the CD that came along with the Kodak Printer? You would need that to install the printer on your computer. Once thats done, you should be able to print the pics
Hope this helps
Thanks
Ranjit

Kodak EASYSHARE... | Answered on Aug 24, 2009 | 193 views


Make sure you are using Thermal Paper for printer docks

if problem still persist

call the technical support thru this number 1800 235 6325

Hope this will help

Regards
Byron

Kodak EASYSHARE... | Answered on Aug 21, 2009 | 84 views


look at the rollers and see if they have cracks
you may have to put a roller kit in

If you need further help, reach me via phone at https://www.6ya.com/expert/david_eb7ea98642566cc6

Kodak EASYSHARE... | Answered on Nov 02, 2009 | 375 views

Not finding what you are looking for?
Kodak EASYSHARE G610 Thermal Printer Logo

Popular Tags

65 questions posted

Ask a Question

Usually answered in minutes!

Top Kodak Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Clive
Clive

Level 3 Expert

4345 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Kodak Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...