20 Most Recent Amerock 0099689 Flat Arch Pull 96Mm Questions & Answers


Most of the time all you need to do is swap the two handles and flip the latch over so the angled part of the latch is on the other side, so it will self latch when you close the door.

Amerock Hardware... | Answered on Jun 15, 2018


Have you tried calling AmerlockForLess.com for assistance? On their website they say: "American customer service reps by phone from 8:30 to 5:00 M-F. Our toll free number is 1-877-261-5805."

Amerock Hardware... | Answered on Apr 07, 2018


Look for a small hole or slot on or around the handle, Push a pin inside to unlock it.

Amerock Hardware... | Answered on Feb 12, 2015


If you can take the lock off the door push a small metal piece inside the lock from the back to push out the broken key. If unable to take it off, get an old windshield wiper, remove the stainless steel supports from the wiper (long skinny piece of metalt holding rubber blades in place). Grind or file an angled tooth into the end of one. Insert into lock (tooth down) so it catches on the teeht of ghe broken key, pull rod and key out.

Amerock Hardware... | Answered on Aug 29, 2014


You will have to carefully drill them out. Start with a small bit and slowly work up to a bigger one as you go once most of the head is drilled out the latch should pull off, you can then use vice grips to unscrew the remaing part of the screws.

Amerock Hardware... | Answered on Aug 11, 2014


25.4 x 5

Amerock Hardware... | Answered on Aug 11, 2014


Remove lock from door.The round part contacting door usually spins to accommodate different width doors. This will pull the assembly together.

Amerock Hardware... | Answered on Jun 25, 2014


If you want to clean or polish your copper cabinet hardware, there are few way to go, like cabinet hardware (Knobs & Pulls) which you believe are copper it's really zinc casting with copper plated.on which is applied a thin coat of polish to prevent oxidation, and that plate about two atoms wide and any sort of a harsh or chemical clean on it will wipe out it.

The finest thing you can follow is to take a jewelry polishing rag and go over the Cabinet hardware a bit. However, I don't see that it is offensive to have a copper pull that has turned color and has a "patina" on it. That is sometimes viewed as beneficial in decorating.
The zinc pulls with copper plating are made so after few years replaced with new pulls.

Amerock Hardware... | Answered on May 30, 2013


A router, sander, hand-sanding or a hand planer can all accomplish this task.

Hardware &... | Answered 2 hours ago


Designing kitchen is a precise art. I suggest you to take a look about glass splashbacks and worktops which gives your kitchen a stunning look. Give a click to CreoGlass Design to know more about kitchen glass splashbacks designs for your kitchen.

Hardware &... | Answered Yesterday


Google (brand)(TM1627L)(manual) without parens for instructions.

Hardware &... | Answered 3 days ago

Not finding what you are looking for?
Amerock 0099689 Flat Arch Pull 96Mm Logo

0 questions posted

Ask a Question

Usually answered in minutes!

Top Amerock Hardware & Accessories Experts

Gene Haynes

Level 3 Expert

5353 Answers

Brad Brown

Level 3 Expert

18108 Answers

Tom Chichester

Level 3 Expert

54195 Answers

Are you an Amerock Hardware and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Amerock Hardware & Accessories

  • Amerock Hardware & Accessories

Most Popular Question

clean polish copper cabinet hardware

  • Hardware & Accessories
Loading...