Top 20 Bulova Watch Questions & Answers


they cost about $60. they are cheaply made throw away dress watches. you didn't get ripped off. you just wasted your money on cheap chineese garbage, you are not alone.
wear the watch, throw it away when it stops or you don't like it anymore.

Bulova Watch | 94 views | 0 helpful votes


Yes, Bulova used M0 to indicate the year 1960, but the marking on the case may not necessarily match the movement. It is not uncommon to find a movement that was produced one year earlier or one year later in a case made for the model. So, although the case of your watch was produced in 1960, the movement may be from 1959 to 1961.

Bulova Watch | 338 views | 1 helpful votes


What is your question?

Bulova Watch | 52 views | 1 helpful votes


take it to walmart and let them do it . of any god watch shop . you need a case press to put it back together without breaking the front crystal

Bulova Watch | 116 views | 0 helpful votes


Read your instruction booklet that came with the watch. If you don't have it, either google the brand and search their site for the model OR take to your local jeweler that works on watches. Expect to pay them to set it.

Bulova Watch | 312 views | 0 helpful votes


take to a jeweler with a watchmaker, or at least to a jewelry store that works on watches. You may be able to get it off, but you will never be able to get it back on!

Bulova Watch | 193 views | 0 helpful votes


I know it's been a while since you posted this question, but I just had to do this with mine after it was lost in a drawer for a few years, and I had no luck googling so I had to figure it out for myself.

First, you have to remove the band, but you only need to do this on one end, not both. I did this by twisting the watch body around while holding the cloth/leather portion of the band still, letting the elastic part twist around with the watch body. Then, just use a fingernail to pull on the ridges on one end of one of the pins that are holding the band on; both ends are spring-loaded, so it doesn't matter which. Twist the watch body back around, and you'll now be able to flip it over to expose the back.

Now, take a thin, strong blade (I used a butterknife) and pry off the back plate. There's a tab on the upper right edge of the back plate to make this much easier. Since it probably came off in the process, place the rubber sealant ring back around the edge of the backplate.

Once you have the back plate off, there's a thin metal piece covering the battery that's held on with one screw. Remove that with an eyeglass screwdriver or any other similarly-sized Phillips-head screwdriver. There's just a small tab holding the metal piece in place on the other side, so just flip the metal piece up a bit and pull it out. You can now take the battery (a CR2016 3-volt watch battery) right out.

But wait, what's this? Beneath that battery, separated by a small plastic insert, is another, smaller one, a 377/376 1.55-volt watch battery. The 377/376 powers the analog movement, while the CR2016 powers all the digital stuff and the backlight.

Replace both batteries, making sure to place the plastic insert back on top of the 377/376 before putting the CR2016 back in, and follow the steps in reverse to put the watch back together. You may have some difficulty getting the back plate back on, but I just pressed one side in and held it while I tapped the other side down with my fist.

Bulova Watch | 1,155 views | 1 helpful votes


Contact Bulova customer service, if that is in fact the maker of this watch brand. I've never heard of it before, neither have I run into a watch that needed to be recharged. What about a battery? Is it solar? kinetic? Did you receive an instruction manual? I would research these obvious problems first, then start thinking about other issues like perhaps your particular watch is malfunctioning and needs to be sent back. If your computer can read it but the screen is blank then it is not an energy problem, it is a hardware problem, which would have to be taken up with the manufacturer.

Bulova Watch | 75 views | 0 helpful votes


Read the instruction booklet - or take to a watchmaker

Bulova Watch | 23 views | 0 helpful votes


Please tell me how I can get this watch on the right time and date

Bulova Watch | 1,443 views | 4 helpful votes


Read the instructions it came with or look for an interactive video online. That is going to be the easiest way.

Bulova Watch | 231 views | 0 helpful votes


The FC 270 does not have a second hand, the red tipped hand points to the month.

Bulova Watch | 199 views | 0 helpful votes


You either need a new battery, new motor or it needs to be serviced.

Bulova Watch | 24 views | 0 helpful votes


you should go to kevin jewelers and find out how much it costs

Bulova Watch | 24 views | 0 helpful votes


That it is a ladies watch manufactured in 1996.

Bulova Watch | 261 views | 0 helpful votes


there is no ''adjust'' button?

Bulova Watch | 497 views | 0 helpful votes


Hi Larry? am intrested to, & inbox me through fb

Bulova Watch | 163 views | 0 helpful votes


Press and hold the mode button. Does a digit flash? If not try a "set" button. Once you get a digit flashing, you use one of the other buttons to change the digit. You can't do any damage so experiment.

Bulova Watch | 805 views | 3 helpful votes

Not finding what you are looking for?
Bulova Watch Logo

1,052 questions posted

Ask a Question

Usually answered in minutes!

Top Bulova Watches Experts

Arturs Kalnins
Arturs Kalnins

Level 3 Expert

2338 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Janelle Schoonover
Janelle Schoonover

Level 3 Expert

841 Answers

Are you a Bulova Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Bulova Watches

  • Bulova Watches

Most Popular Question

watch

  • Watches
Loading...