20 Most Recent Timex T5G341 Sports Radio Control Watch Questions & Answers


ask your watchmaker to remove/disengage the alarm spring

Timex T5G341... | Answered on May 10, 2014


the problem of your watch is only the battery.. bring it to watch service center for replacement of battery. i'm happy to help you!

Timex T5G341... | Answered on Aug 01, 2011


Thank you for contacting FixYa.<br /> You can actually go to Timex for this at :<br /> http://www.timex.com/info/Product_Instruction_Guides_Downloads<br />Best regards.<br /> Jewel

Timex T5G341... | Answered on Aug 31, 2010


To change from 24 hour to 12 hour, you hold down the "Mode" button until it switches from 24 hour to 12 hour or vice versa. To change the time zone, you hold down the "Set" button until the time zone that you set it in flashes (like "LAX" on my watch). Then you press the "Receive/Start/Stop" button to choose the specified time zone you want. To set for daylight savings time ("DST" on the watch), after holding the "Set" button and having the time zone flash, you could press the "Mode" button. It will give you a few options for the daylight savings time (Auto, On, or Off). I chose the "On" option, which immediately changed for daylight savings time. If you manually want to change the time, you could hold down the "Set" button and keep pressing the "Mode" button until the time starts flashing on your watch, then pressing the "Receive/Start/Stop" button until you change it to the time that you want. You could also set the watch to beep or chime after pressing the set button if you wanted to know that piece. You hold down the "Set" button when you are done to get it to stop flashing. These instructions worked for my Timex T5G341 Universal Radio Control Watch. I hope this helps.

Timex T5G341... | Answered on Mar 14, 2010


You could change between 12 and 24 hour by pressing the "Mode" button and the "Receive/Start/Stop" button at the same time. I still cannot figure out how to reset for Daylight Savings Time, though.

Timex T5G341... | Answered on Mar 14, 2010


If it is 1 hour out it could be on daylight saving time setting (DST).

If you haven't got any instructions you can get instructions from the Timex web site "timex.com".

At the bottom of the screen click on manuals/downloads", then on "product
manual download"

Enter your watch type in the search box and click on "search"

Timex T5G341... | Answered on Feb 15, 2010


Go to timex.com choose country then click on the help tab at the top of the page. You will find a tab for manuals and downloads on the left hand side.

Timex T5G341... | Answered on May 02, 2009


battery should always be original otherwise it will destroy your watch.dont try to put the battery yourself give it to an company autherised shop and allow them to put it

Timex T5G341... | Answered on Jan 12, 2009


Battery issue is my best guess, have it changed!

Timex Watches | Answered on Oct 06, 2019


Google shows how.

https://www.leaf.tv/articles/how-to-set-the-date-for-a-timex-expedition-indiglo-watch/
?
?Quoting from the link above:
?
?"The Timex Expedition Indiglo wristwatch tells the time and date, illuminates at the press of a button, and can wake you up at a designated time. Once you receive and adjust your watch to your liking, you might have questions about how to program the date properly. You’ll want to have an accurate watch before wearing and relying on it throughout your day in class, at work or while exercising. You can set the date on your watch with a few simple steps.
Pull the plastic guard from beneath the crown knob (located on the right edge of the watch), and push the crown knob into the watch to start your watch. You will see the second hand begin to advance.
Pull the crown knob out to the middle position to set the day. The crown knob has three positions: “In,” “Middle” and “Out.” Turn the crown knob clockwise to advance the days up, until the current day appears in the window on the right side of the watch face. Turn the knob counterclockwise to move the date down in number. Push the crown knob all the way in to start the watch.
Pull the crown knob completely out, if the day doesn’t change with the knob in the middle position, and cycle the time backward or forward through 24-hour periods until you arrive at the current day. Push the knob in to start the watch.
Pull the crown out to the middle position and adjust your date to the next month for months that have less than 30 days. Your watch will cycle through 31 days every month, so manual adjustments for shorter months are required."

Timex Watches | Answered on Sep 27, 2019


What would do is take it to a Walmart watch department they have batteries and can help you open the back. Assuming you can't open it

Timex Watches | Answered on Sep 08, 2019


Setting The Alarm Time
This Timex clock radio has dual alarms that can be set and used independently. The initial default alarm settings are 6:00 AM for Alarm 1 and 7:00 AM for Alarm 2. The procedure for setting both alarms is the same.
NOTE: The alarm times can only be adjusted when the clock radio is in the OFF mode. If the radio is playing, press and hold the POWER/MODE button until the display briefly shows 'OFF'
and then reverts to the time.
1. Press and hold the ALM 1 button until the Alarm 1 time and the Alarm 1 Buzzer indicator begin flashing in the display, then release the button.
2. Press the TUN + (HOUR) button to advance the display to the desired wake-up hour. Observe the PM indicator to confirm that you have set the wake-up hour correctly. If the PM indicator is 'On' the wake-up hour on the display is PM. If the PM indicator does not appear the wake-up hour on the display is AM.
3. Press the TUN - (MINS) button to advance the display to the correct wake-up minute, and then release the button.
4. Press the ALM1 button once more to confirm the wake-up time setting or after 8 seconds the display will stop flashing and the new wake-up time will be entered automatically. The display will return to the correct time of day but the Buzzer indicator will remain 'on' in the display indicating that the Alarm 1 is now set to wake you to the buzzer.
5. To change the alarm mode from buzzer to radio, or to cancel the alarm, press the ALM 1 button again. The Buzzer indicator will turn on. Press the ALM1 button once more to select the Radio alarm. The Radio indicator turns on. Press the ALM 1 button once more to cancel the alarm function. The alarm indicators disappear and the display returns to the correct time.
6. Follow the same procedure to set the Alarm 2 wake-up time.

https://cdn.timexaudio.com/media/product/files/T235_User_Manual.pdf

Timex Watches | Answered on Aug 14, 2019

Not finding what you are looking for?
Timex T5G341 Sports Radio Control Watch Logo

13 questions posted

Ask a Question

Usually answered in minutes!

Top Timex Watches Experts

Janelle Schoonover
Janelle Schoonover

Level 3 Expert

841 Answers

pacdave

Level 2 Expert

104 Answers

 Mikey
Mikey

Level 3 Expert

5746 Answers

Are you a Timex Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Timex Watches

  • Timex Watches

Most Popular Question

cannot change from 24 hour 12 hour

  • Watches
Loading...