20 Most Recent Minolta bizhub 200 Copier Questions & Answers


what is the issue?????????????

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Minolta bizhub... | Answered on Jan 24, 2016


Exit Paddle Solenoid (SL2-FN)
Exit Paddle Home Position Sensor (PC11-FN)
Main Control Board (PWB-A FN)

one of the above on the finisher is not working or is jammed

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Minolta bizhub... | Answered on Nov 19, 2015


utility/counter stop 00 stop 01 go to Settings in the Administrator # Initialize and change pw

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Minolta bizhub... | Answered on Nov 14, 2015


go user settings/choice setting tab #6 set default tray to what you want

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Minolta bizhub... | Answered on Feb 22, 2015


Inside the image unit. which is the assy in the machine right side cover that has the two handles on the green looking item

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Minolta bizhub... | Answered on Feb 19, 2015


Sir/mam check the right side door that you open to remove the image unit check that the two latches that hold the door close are OK especially the rear one. Close up. To reset. On the right side of the machine just below the scanner section (The part with the big glass) is a cover next to where you connect the Ethernet cable. Remove the cover with the machine on use a small screw driver and gentle depress the small black switch the machine is going to go thru some screens when you see the screen with the copiers on it to the left on the screen in the middle you will see a "." when that is displayed press 3. Code will come back but now press the Utility/counter button should see button that say maintenance mode press that see trouble reset press that machine again will go thru warm up procedure will see the "." DO Nothing! Should go to "Ready to Copy" if the code comes back have a technician look at it DO NOT CONTINUE TO RESET the code is for the Hot Part called the FUSER. Can catch on fire! That will ruin a perfectly good day!!!!

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Minolta bizhub... | Answered on Feb 19, 2015


In correct code for a Bizhub 350. What is the model # Bizhub Fuser errors start with 34, 37 ,38 for the Bizhub 200/350

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Minolta bizhub... | Answered on Jan 31, 2015


Try this first if it does not work you need a new screen/control panel.

1,. Take a paper clip with machine on and stick it in the tiny hole on the right side of the control panel the screen will change when you see the screen with copiers and computer look under the computer on left side of the screen see a small dot. when it shows press the "3" key go touch panel adjust follow the screen see if that reset the screen if not need a new one.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Minolta bizhub... | Answered on Jan 04, 2015


Sir/Mam, Go to
1. Admin Management
2. Admin #1
3. Reports Settings and or Print list that should give what you want.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Minolta bizhub... | Answered on Dec 30, 2014


Bypass tray? or draw? which one? or large capacity draw?

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Minolta bizhub... | Answered on Dec 06, 2014


Need a new touch screen.One other option. Push utility/counter meter count then press stop 00 stop 02. Places machine in maintenance mode. Then press the utiltiy/counter will see maintenance mode press that find touch screen adjustment. follow the screenthen press start. T clear maintenamce mode and flashing start button. Power off machine main power left side of the machine to the rear.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Minolta bizhub... | Answered on Jul 04, 2014


I would start with the easiest solution, look to see if there is any paper jammed behind the paper tray. There are switches behind the paper tray for paper size. Also, make sure the paper tray guides are in the correct position against the paper in the tray, they tell the copier the paper size. Good Luck

Minolta bizhub... | Answered on Dec 24, 2013


My Bizhub pro 920 Error Code SC35-02

Minolta bizhub... | Answered on Jul 23, 2013


problem in hv unit ( ch corona ) in drum unit replace if necessary

Minolta bizhub... | Answered on Jan 20, 2013


Use the hand feed tray on the right side. When you put paper in this tray it usually will ask you to set the paper type. 110 lb. card stock is EXTREMELY difficult to copy onto. It might be better to bring this particular job to a copy center. This type of stock will put serious wear on your machines drum. Drums cost big money. Good luck.

Minolta bizhub... | Answered on Jul 15, 2011


Press the "utility" button.

Minolta bizhub... | Answered on Jan 05, 2011


This means that imaging unit of your photocopier machine should be replaced.its life is over now.

Minolta bizhub... | Answered on Oct 07, 2010

Not finding what you are looking for?
Minolta bizhub 200 Copier Logo

Popular Tags

32 questions posted

Ask a Question

Usually answered in minutes!

Top Minolta Office Equipment & Supplies Experts

Adorjani Laszlo

Level 3 Expert

1316 Answers

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6850 Answers

Ed
Ed

Level 3 Expert

476 Answers

Are you a Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Minolta Office Equipment & Supplies

  • Minolta Office Equipment & Supplies

Most Popular Question

code sc35 02 biz hub pro c500

  • Office Equipment & Supplies
Loading...