20 Most Recent JVC KD-PDR30 Car CD/ MP3 Player Questions & Answers


I was having the same problem with a jvc kd hdr 30. I Installed it myself over a year ago and never wanted to deal with the issue. Finally, I decided to take a look at it today.
On my head unit, all wires were connected except one blue one with a tag that says "do not connect to power, for remote device or power antenna only." This unit is in a '97' MBZ E320 with no visible antenna; I think it is part of the windshield. In any case, between the wiring diagram in the manual and the harness that is part of my car, I was left with 2 blue wires to choose from, one with a white stripe and one with a gray stripe. After testing both for power or ground, I determined neither had power with key on or off. Both had high resistance ground when compared to the chassis ground. In other words, I measured between chassis and these wires. First, I took a wire and connected it to the chassis ground and connected the other end to the blue wire coming from the unit while tuned to a local am station. This simply killed all reception am or fm but did not harm the unit. Next, I connected the blue wire with gray stripe of the car harness to the blue wire of the unit and again this killed all reception. Then I connected the blue wire with white stripe of car harness to the blue wire of unit and presto magic I had great am reception.
I am guessing that this blue wire with white stripe must be part of the antenna itself or perhaps is a connection that increases antenna power. Maybe 'power antenna' on tag refers to an actual powered antenna (like as in amplified?) and not as in an antenna that rises up out of fender, as I believed.
This may not help the first person with the question, but maybe it will help someone out there who searches for these kinds of answers like I do from time to time.

JVC KD-PDR30 Car... | Answered on May 11, 2016


The wiring diagram is on page 3 of the installation guide.

JVC KD-PDR30 Car... | Answered on May 25, 2012


The wiring diagram is on page 3 of the installation guide.

JVC KD-PDR30 Car... | Answered on May 25, 2012


Did you cut the harness already? If not, get an adapter from crutchfield or metraonline website. the adaptor plugs into your car and the other end color matches exactly with that of JVC

JVC KD-PDR30 Car... | Answered on Mar 10, 2012


It sounds like the laser isn't working properly or isn't working at all.

JVC KD-PDR30 Car... | Answered on Feb 28, 2011


A trick I've used several times is to hit the eject button and take another CD, put it in about 1/3 of the way, push down on the CD that's stuck inside while pulling forward, all of this while the deck is trying to eject will usually get a stubborn CD out.

JVC KD-PDR30 Car... | Answered on Feb 25, 2011


If you have not put on the set after the water logging then you could have been saved. Now there is a chance that the processor section have shorted circuit. please open the set, use a hair dryer and warm up to clear up all the moisture. use petrol to clean the main board do not put any petrol on the main panel or plastic.but only the PCB. after cleaning heat again till you have warrmed up and cleared all moisture. reconnect the set and test. I hope this must clear your fault or else you will be having faulty componentts that needs further continuity and voltag checks for finalising. hope my advice helps. good day

JVC KD-PDR30 Car... | Answered on Jul 06, 2010


try disconnecting power to the deck for a few minutes.

JVC KD-PDR30 Car... | Answered on May 04, 2010


you will need to install an antenna wont work to well without one

JVC KD-PDR30 Car... | Answered on May 01, 2010


http://resources.jvc.com/Resources/00/00/91/GET0467-001A.pdf
This link is the user manual for your Radio. Colck instructions are found on page 6. This File is a PDF Free adobe reader will open it. Here is the link to adobe reader just in case you need it.
http://get.adobe.com/reader/
Every thing is free.
Hope this helps.
Please leave feedback

JVC KD-PDR30 Car... | Answered on Nov 16, 2009


Get your hands on a good wiring diagram for the vehicle, preferably from the dealer, find applicable wires (and color) on chart.

Then get said head unit, either in the manual for it or on the case of the unit there will be a color-code chart, match colors and/or wire functions (ie., POWER to 12V constant).

You should ALWAYS use a remade wiring harness, every professional does unless its a true fabricated install, but this method works also. Remember, the wires are already existing in the car, all you really need to do is identify which is which and hook them up to the head unit.

PS: make good, secure connections; no half-assed electrical tape jobs.

JVC KD-PDR30 Car... | Answered on Sep 29, 2009


CLICK HERE for an eBay auction featuring the cable you require.

Thanks for using FixYa - a Very Helpful rating is appreciated for answering your FREE question.

JVC KD-PDR30 Car... | Answered on Jul 28, 2009


you can probably get one off ebay, JVC website. You can also google JVC faceplates to see if anyone else carries them

JVC KD-PDR30 Car... | Answered on Jun 22, 2009


If you go to this website they should have all the parts you need for your stereo.

http://www.partstore.com/Model/Matsushita/JVC/KDPDR30.aspx?ModelAliasNumber=KD-PDR30

JVC KD-PDR30 Car... | Answered on Apr 10, 2009

Not finding what you are looking for?
JVC KD-PDR30 Car CD/ MP3 Player Logo

Popular Tags

27 questions posted

Ask a Question

Usually answered in minutes!

Top JVC Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

5013 Answers

Dalynn Turner

Level 2 Expert

346 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Are you a JVC Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

JVC Car Audio & Video

  • JVC Car Audio & Video

Most Popular Question

no am reception car radio get fm

  • Car Audio & Video
Loading...