20 Most Recent Sony BRAVIA KDL-52W4100 52 in. LCD HDTV - Page 3 Questions & Answers

If the LVDS cable [the flat data cable, that connects the T'Con baord to display panel] have any loose contact at any one end connectors, this kind of fault can occur. To most models of Sony LCD TVs, the T'Con board stated above, will be inside the display panes, and could not be accessible. Check your TV. If the T'Con board is not a built-in one type, just re-seat both ends of the LVDS cable. If it is built-in type, contact the authorized service center. You can't access it without disassembling the display pane, and it is a skilled work. If you wish to get some details, http://electronicshelponline.blogspot.com/ Pull up older posts.

Sony BRAVIA... | Answered on Dec 17, 2013

Please count the blink time between two pauses. and update.
on the basis of the count problem can be fixed.

Sony BRAVIA... | Answered on Nov 24, 2013

It can be a internal conector problem, normally it is necessary to change the LCD display as it is internal to this part. You should take the set to a service center to be shure, and see if it can be fixed otherways.

Sony BRAVIA... | Answered on Oct 12, 2013

To reset it to factory settings, you have to enter its service mode option. If you wish to get more details, about how to enter, adjust and exit the service mode, check the site linked here. http://electronicshelponline.blogspot.com/
Pull up previous posts by its left sidebar, or type in the brand name and model number to of your set, to its search box, and press 'Enter' or view it in Mosaic / Timeslide option.

Sony BRAVIA... | Answered on Sep 26, 2013

While holding down the UP arrow key, press the power button. The TV will turn off and back on and reset to factory default settings. Hope this helps

Sony BRAVIA... | Answered on Sep 25, 2013

It will cost around 2/3rd of the total cost of the TV.

Sony BRAVIA... | Answered on May 24, 2013

Bus clock and/or data lines low at power on. 6 blinks of standby light denotes this. Actually, it should be a motherboard problem. Your TV need a thorough checkup before confirmation. If you wish to get more details about the blinking codes to Sony TVs, check this link.

Sony BRAVIA... | Answered on Feb 19, 2013

That is usually an indication of an issue in the left and right inverter boards or a beginning of main panel failure. In either case I would replace the inverter boards first. not too expensive. If that fails than you are looking at a panel replacement, that is minimum 600,00 dollars for the part.
Good Luck Ed Pinero

Sony BRAVIA... | Answered on Feb 07, 2013

Sounds like a power board reset switch gone bad. Have the power board replaced.
Good Luck Ed Pinero

Sony BRAVIA... | Answered on Feb 06, 2013

i have a Sony Bravia LCD TV KDL-60EX645
and it Blinks about 6 times every 25 seconds and it blinks next to the "Power" symbol? what does that mean? i cannot turn on the tv because it turns of and its not on eco and i just got it for christmas. its a 55" and i have a 3 year warrinty. but do i need to pay for it, or will it turn back on later ive been waiting about a week? i am a major gamer i usually spend 14-16 hours using the tv i am a youtuber, but does it burn out? i know alot about tv's but im not used to this error... i need some help so please contact me at Alexcromwell1@live.com
Please help me. i might seem like a slacker but actually i make money of using the tv. thankyou for taking the time to read this and try to help me please. thankyou -Charles

Sony BRAVIA... | Answered on Feb 05, 2013

That should go away on its own with the introduction of the input. If it is on even when something is playing than it is in the settings menu under video display.

Sony BRAVIA... | Answered on Jan 20, 2013

meder tv service......this can sometimes be due to t-controller board failingnot sending proper data to panel.....can order on shopjimmy.com or partstore.com....happy repairs....

Sony BRAVIA... | Answered on Jan 09, 2013

usually that symptoms cause of faulty t-con board..

but before you do that kindly play dvd on your tv and look at the picture if still persisted just change the t-con board to works fine again

Sony BRAVIA... | Answered on Dec 24, 2012

Hi sheridamiddl, I will be happy to help. i few things I would like you to try.
  1. From the menu set the TV back to default options.
  2. Check and see if you have the same problem from different inputs, try watching a dvd or game console.
  3. Unplug the TV for a couple of hours and let it reset.
Let me know if this works and please rate this solution. Lone99star

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/jason_77a19afa8d604dee

Sony BRAVIA... | Answered on Dec 13, 2012

Not finding what you are looking for?
Sony BRAVIA KDL-52W4100 52 in. LCD HDTV Logo

318 questions posted

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76140 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular


  • BRAVIA Sony

Most Popular Question

anyone know stand off sony bravia tv

  • Televison & Video