How to reset the ink level for a HP 60 ink cartridge? I have just refilled a HP 60 black ink cartridge but can not find anything on how to reset the ink level. I would do the "3 ink cartridge" trick but I do not have 3 at this time.
Posted by envelopes1 on
You cannot reset the ink level indicator for the HP 60 ink cartridge. It shouldn't matter anyway because the level is only estimated for "management purposes only" (see user manual) meaning to let you know when it's near time to order a new cartidge. I have tried cycling through 3 different cartridges to reset the ink level for the one I refilled but it didn't work. Refill and just ignore the ink level indicator. Also, it's a good idea to clean the print heads with the solvent in the refill kit before refilling to remove old ink and imrpove print quality.
Posted on Jul 06, 2009
After re-installing driver will scan, but then stops scanning when next request is made. Get Error message...HP CUE-scanning flow component has stopped working. Have an HP Pavilion a6528p PC with Vista Premium
Posted by Wdland on
Open Paint, from Start>All Programs>Accessories and select File>From Scanner or Camera...
Posted on Feb 25, 2010
I have a new HP F4240 printer which uses a HP60 cartridge. I have refilled every other printer cartridge that I have ever used, and it has been many, but this HP60 cartridge does not seem to be refillable what so ever. I have tried to refill 4 different cartridges and have the same problem with all of them. The cartridge is full but will not print and the printer tells me that the black is empty. I do a lot of printing in my business and that is why I refill my own, but this one seems to be a problem. I have done some reading and have seen others say that the HP60 is not refillable. Can anyone help or did I waste $100 on this printer. $15 per cartridge is getting expensive and we go through 1 per week. It would be cheaper for me to throw this printer away and buy one that uses a different cartridge.
Can any one help????
Posted by bbg0 on
had the same problem with this hp60 before .. so when i bought a new cartridge i refilled it before it runs dry ... i'm now on my third refill and it works on both black and color
Posted on Jul 08, 2009
When printer is turned on. Problem started suddenly. Tried power recycle and left unplugged over night. Tried taking our cartridges and replacing. Tried removing cartridges altogether and re-starting. But none of these have fixed the issue. What should I try?
Posted by deeralhan on
The lights flash in special sequences to inform you about various error conditions. See page 136 of the user manual which you can get here: http://h10032.www1.hp.com/ctg/Manual/c01374711.pdf
Posted on Jul 06, 2009
how to install hp deskjet f4280 without disk
Posted by mjp_rcp on
You can download the software from this link , just select the operating system that you're using and then after that you can already install the printer...
Posted on Sep 26, 2009
How do I reset the ink levels on a HP Deskjet F4200 series when I put a new ink cartridge in?
Posted by mlbyrd1467 on
First try the information below
Check that you removed the protective tape. some cartridges have two of these pieces of tape one over the head and possibly on on the contacts to the printer.
If you recently re-filled or had the cartridge refilled or even bought one of the many cheaper replacement cartridges you should read on
Most modern cartridges have an ink level chip built on to them.
Should the level drop below 25% then most of these chips lock up and will not reset.
Re-filling them will have no effect
If you are lucky you should be able to find either a chip resetter around on the INTERNET or maybe even local
Even better empty cartridges that never need to be reset.
The second option is my preference
I realise these are not for your specific printer but there are others listed on both those sites as well.
cheaper cartridge problems have been on the rise recently and that is for ALL makes of printer.
Posted on Sep 07, 2009
i do not have a cd rom and therefore cannot use the cd provided to install my hp deskjet 4280 all in one printer, scanner, copier. can you provide the necessary instructions that i can follow to have my printer installed and working
Posted by franni40 on
Click Below Link --> Select Your OS --> Download Drivers --> Simple !!!
Posted on Feb 09, 2009
how to reset hp deskjet printer
Posted by stephanie2... on
HP WILL NOT SCAN AS PDF FILE
Posted by bfiscus on
open HP Director > Scan Settings > Scan Document Settings > select Save as File and on the menu below select file type PDF.
If PDF is not listed in the menu below scroll the menu and select PDF instead Save as file.
If already PDF is not listed download and install this very light and simple freeware software:
It enables to create pdf file directly from a scan jobs.
Hope this helps !
Posted on Sep 08, 2009
how do I fix :Alignment Failed due to the alignment plot in the scanner being skewed
Posted by zakfrankel on
The alignment page was not placed properly on the scanner. You can follow the instructions here http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01367400&cc=us&lc=en&dlc=en&product=3390949
Try the alignment again it should work. Good Luck
Posted on Jul 28, 2009
858 questions posted
Usually answered in minutes!
Step 2: Please assign your manual to a product: