20 Most Recent HP LASERJET P1006 Printer - Page 3 Questions & Answers


1) open printers and faxes.... right click on the printer icon... click on pause printing... and then click on cancel documents.... when that is cleared... right click and delet the printer icon while u have the usb cable unplugged... once that is gone... plug in the usb cable... wait for few seconds and then try to print....

2) if u are not able to delete the printer icon by following the above step... click on start and then run... type in services.msc and hit ok.... in the services window stop the service called print spooler and then start it again.... and then follow the step 1... it should get deleted

3) even after completing the step 1 and when u try printing... if u r getting paper jam error message then thoroughly look for any jammed paper... even a small piece of paper will cause this problem... so check out thoroughly... and if u dont find any... reset the printer by following the below link

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01174212&tmp_task=useCategory&lc=en&dlc=en&cc=us&product=3435684&lang=en

you can also go through the following document

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01179923&tmp_task=solveCategory&lc=en&dlc=en&cc=us&lang=en&product=3435684

HP LASERJET... | Answered on Mar 18, 2011


Welcome to FixYa!

1. Download the installation files of your printer from this link http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4062&lc=en&cc=us&dlc=en&sw_lang=&product=3435684#N183
2. Select your operating system in the download page and click next.
3. Click Driver - Product Installation Software.
4. Click HP Laser Jet Full Feature Software and Driver to download.
5. Run the downloaded installation software and follow the instructions during the installation.

The image below is your guide in downloading.
jas247_10.gif
Rates and comments are appreciated.
Thank you for using FixYa.
Jas

HP LASERJET... | Answered on Feb 22, 2011


Hi,

You can download the installation driver and software from manufacturer's support website by clicking this link

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3435683&lang=en&cc=us&prodTypeId=18972&prodSeriesId=3435682&taskId=135

On the page which opens, select the operating system of your computer (Windows Xp/ Vista..) from the drop-down menu and click the "Next" button. Then download the required drivers and software.

The list of available drivers will load only after selecting the operating system of the computer.

Hope this solves your problem. Thanks for using FixYa

HP LASERJET... | Answered on Feb 18, 2011


http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=228&lc=en&cc=us&dlc=en&sw_lang=&product=3435684#N160
u can download the driver from here ... just make sure the operating system is correctly selected

HP LASERJET... | Answered on Feb 04, 2011


You can download the printer driver from this link, just click HERE and continue with the download.

HP LASERJET... | Answered on Jan 28, 2011


Click here Click on above link select os and download driver and install. Let me know if you need further assistance. Thanks for using FixYa.

HP LASERJET... | Answered on Jan 23, 2011


THE PRINTER STATUS SAYS IT IS OUT OF PAPER, BUT

THE PRINTER STATUS SAYS IT IS OUT OF PAPER, BUT THERE IS PAPER IN THE TRAY. HOW DO YOU CORRECT THIS PROBLEM?


The most likely scenario is that one of the paper travel sensors are "ON" There is one at the top of the printer where the paper exits. The other is below where the paper enters into the printer. Take a close look for torn shreds of paper that may remain in the printer. Look inside the front of the printer where the paper goes. Take the toner cartridge out of the printer, look in the hole, inspect closely for loose paper. I hope this information was helpful, should you have further problems perhaps seek an HP Certified Technician for repair.



prefab_9.jpg

HP LASERJET... | Answered on Jan 15, 2011


You should be able to find what you are looking for here for your printer and operating system:

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=us&product=3435684&

HP LASERJET... | Answered on Jan 07, 2011


is your printer check us a primary option?
are you reinstall your driver?

we need more detail for this case

HP LASERJET... | Answered on Dec 19, 2010


Envelpopes should be printed using the feed tray located in the front of the printer not through the paper cassette. Try this: Follow these steps to print on envelopes from a computer running Windows. NOTE: For specific details on formatting text for printing on envelopes, consult the help files in the word processing software. For best results, consider using a label for the return address.
  1. Click File , and then click Print . The Print dialog box opens.
  2. Depending on the software program, click Properties , Options , Printer Setup , or Preferences . The printer Properties dialog box opens.
  3. Click the Paper/Quality tab.
  4. Select Envelope as the paper type.
  5. From the Size drop-down list, select the applicable size. To create a custom size envelope, use the following steps:
    1. On the Paper/Quality tab, click Custom .
    2. Click in the Name text box, and then enter a name for the custom envelope size.
    3. Click in the Width text box, and then enter the width. NOTE: Make certain the size is in inches. Click the Use Millimeters/Use Inches button to toggle between using millimeters and inches to define the custom paper size.
    4. Click in the Height text box, and then enter the height.
    5. Click Save .
  6. Click Apply to save the settings.
  7. Click OK to print the envelopes. NOTE: An error message might display asking to load an envelope into the manual feed tray. This might occur even if the envelopes are loaded. Make sure the envelopes are loaded, and then click Continue . The product will continue printing from whichever input tray contains the envelopes.

HP LASERJET... | Answered on Dec 17, 2010


You can download the HP printer drivers from their supportWEB site. Please click on this link and select your model printer to download:-http://welcome.hp.com/country/us/en/support.html

HP LASERJET... | Answered on Nov 24, 2010


New toner cartridges have a plastic strip within the toner cartridge, which is required to be pulled out before using it. Make sure that you have pulled it out.

Hope this helps!

CreativeTECH

HP LASERJET... | Answered on Nov 19, 2010


You can download the HP printer drivers from their supportWEB site. Please click on this link and select your model printer to download:- http://welcome.hp.com/country/us/en/support.html

HP LASERJET... | Answered on Nov 18, 2010


Try using the HP Print Diagnostic Utility in Windows - HP Customer Care (United States - English).

If you need more help come back.Post / thumbs / testimonial are welcome!

HP LASERJET... | Answered on Nov 15, 2010


Click Here for the drivers for the HP P1006 laserjet printer, just make sure you know your operating system... Hope this helps and if so please mark as FixYa!!

HP LASERJET... | Answered on Nov 07, 2010


Remove the paper from the printer. Open the printer and remove the toner cartridge. Towards the back lower part of the machine is the paper feed tire. It is a gray rubber "wheel" and is on a metal bar that runs from side to side. Take a small cloth and dampen it with some glass cleaner. Clean the tire as best you can. May have to try and rotate it a bit to get to all of it. Then re-install the toner and reload the paper. If this works then great. If not it sounds like you may have a mechanical problem and will need service.
Good Luck and Thank You for using Fixya.
WheatlandServices

HP LASERJET... | Answered on Nov 04, 2010


Hi there,
* Just follow the below link :
Link :
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=3435684&lc=en&cc=us&dlc=en&lang=en&cc=us&submit=Go%20%BB

* Select your operating system and download your HP LaserJet P1006 drivers under Step 2.
* There are 2 drivers available :
1. HP LaserJet Full Feature Software and Driver
2. HP LaserJet Hostbased Plug and Play Basic Driver
( If you are using a MAC Operating System, then the drivers would differ then the above given options. )

* choose the driver which suits your requirement the best.

HP LASERJET... | Answered on Oct 22, 2010


Here's the driver you'll need...

Windows XP, Windows Vista OR Windows 7:
ftp://ftp.hp.com/pub/softlib/software11/COL21048/bi-55240-5/ljP1000_P1500-HB-pnp-win32-en.exe

HP LASERJET... | Answered on Oct 22, 2010

Not finding what you are looking for?
HP LASERJET P1006 Printer Logo

134 questions posted

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

LaserJet HP

  • LaserJet HP

Most Popular Question

print manual feed

  • Office Equipment & Supplies
Loading...