20 Most Recent Samsung SCX-4300 Monochrome Laser Multifunction Printer Questions & Answers


You need to change the software of your printer by going to TECH mode and sending some files to the printer.Give me you email so i can send you the instructions and the software if you want to.

Samsung SCX-4300... | Answered Yesterday


Everything that was on CD is available from Samsung support website. You go on the Downloads tab select either Manual, Drivers, or Software and download the appropriate files based on your operating system. Here is the Samsung link http://www.samsung.com/au/support/detail/supportPrdDetail.do?menu=SP01&prd_mdl_name=SCX-4300

Samsung SCX-4300... | Answered on Jul 11, 2019


Toner exhasted error in samsung scx-4300...

Samsung SCX-4300... | Answered on Jun 20, 2019


SOLVED IT!
- PROBLEM: I'm using a refilled toner / NOT original Samsung (supplier: Peach, Switzerland)
- SOLUTION: 1. Remove the toner 2. Simply put a tape over the four metal contacts on the backside of the toner 3. Insert the toner
- It will now print, the printer says "low toner" & the LED status light is red - just ignore! It still work well....
- EXPLANATION: the chip (behind the four contacts) seems not be needed. I used a compatible 3rd party toner (Peach, Switzerland)
- Observation: The refilled toner worked well for the first 2-3 weeks, then suddenly I had this error message.

Samsung SCX-4300... | Answered on Jun 11, 2019


Click here for detail specification of Samsung SCX-4300 Monochrome Laser from Samsung Official Site

Hope this helps! Dont forget to rate the solution!!
CreativeTECH

Samsung SCX-4300... | Answered on Mar 07, 2019


we have reset software for scx 4623f printer. www.nakshatraworld.com

Samsung SCX-4300... | Answered on Feb 27, 2019


Maintenance > Of clear Of setting > Of all Of setting [OK]

In the service menu (TECH MODE):MENU> Of data Of setup > Of clear of count > Of clear Of all CNT

MUSTAFA BULENT KILIMCI
YUNUS COMPUTER CEO
COMPUTER EXPERT
e-mail & msn : address mbkilimci@yunuscomputer.com

Samsung SCX-4300... | Answered on Feb 08, 2019


the problem is in laser module, just replace

Samsung SCX-4300... | Answered on Jan 19, 2019


Download the Samsung Easy Document Creator will help.

Samsung SCX-4300... | Answered on Jan 15, 2019


When I start my SCX-4300, printer is OK, but from scanner I can hear sound as ta-ta-ta-ta-ta-ta. It has duration about one minute, than it stop and on display is writing "scanner error". The scanner does not ready, does not work. What can I do with the problem?

Samsung SCX-4300... | Answered on Nov 08, 2018


open the back cover and locate the chip numbered 93c66,its above the USB port on the mainboard.short the top-left and bottom left pins and turn the printer on for 5-10 secs...that resets the page count to 0... also either remove the chip on the toner or cover it with a cellotape

Samsung SCX-4300... | Answered on Oct 22, 2018


my samsung printer scx 4300 toner exhausted replace toner error How to solve this problem?

Samsung SCX-4300... | Answered on Oct 18, 2018


hi my printer is samsung 4300 and problem is tonne resat?

Samsung SCX-4300... | Answered on Oct 09, 2018


my printer scx4300- problem for toner empty or replacement toner, but toner is refiled. this download software

Samsung SCX-4300... | Answered on Jun 20, 2018


is the scan through program compatible with apple mac systems
there will not be an icon on the desk top until you put one there
try and find it in the search box at the bottom of the programs box by typing in scan tru and enter that

Samsung SCX-4300... | Answered on Sep 10, 2017


Hello , I believe I can help you out.

First here is a bit about your machines toner maintenance.

Second will be how to change the cartridge.

Remember if I was of assistance please be kind and leave a kind quick testimonial and good rating.
---------------------------------------------------------------------------------------------------

Maintaining the toner cartridge
Toner cartridge storage
Toner cartridges contain components that are sensitive to
light, temperature, and humidity. Samsung suggests users
follow the recommendations to ensure the optimum
performance, highest quality, and longest life from your
new Samsung toner cartridge.
Store this cartridge in the same environment as the printer
it will be used in; this should be in controlled office
temperature and humidity conditions. The toner cartridge
should remain in its original, unopened package until
installation – If original packaging is not available, cover
the top opening of the cartridge with paper and store in a
dark cabinet.
Opening the cartridge package prior to use dramatically
shortens its useful shelf and operating life. Do not store on
the floor. If the toner cartridge is removed from the printer,
always store the cartridge:
• Inside the protective bag from the original package
• Correct side up in a horizontal position (not standing on
end)
• Do not store consumables in;
- Temperature greater than 40°C (104°F).
- Humidity range less than 20% and not greater than
80%.
- An environment with extreme changes in humidity or
temperature.
- Direct sunlight or room light.
- Dusty places.
- A car for a long period of time.
- An environment where corrosive gases are present.
• An environment with salty air.
Handling instructions
• Do not touch the surface of the photosensitive drum in
the cartridge.
• Do not expose the cartridge to unnecessary vibrations
or shock.
• Never manually rotate the drum, especially in the
reverse direction; this can cause internal damage and
toner spillage.
Use of non-Samsung and refilled toner
cartridge
Samsung Electronics does not recommend or approve the
use of non-Samsung brand toner cartridges in your printer
including generic, store brand, refilled, or remanufactured
toner cartridges.
CAUTION: Samsung’s printer warranty does not cover damage to
the machine caused by the use of a refilled, remanufactured, or
non-Samsung brand toner cartridge.
Estimated cartridge life
Estimated cartridge life (the life of the toner cartridge yield)
depends on the amount of toner that print jobs require. The
actual print-out number may vary depending on the print
density of the pages you print on, operating environment,
printing interval, media type, and/or media size. For
example, if you print a lot of graphics, the consumption of
the toner is high and you may need to change the cartridge
more often.
Redistributing the toner cartridge
When the toner cartridge is near the end of its life:
• White streaks or light printing occurs.
• The warning message, Toner Low displays on the control
panel.
• The Smart Panel program window appears on the computer
telling you that the toner cartridge is low on toner.
• The Status LED blinks red.
If this happens, you can temporarily reestablish print quality by
redistributing the remaining toner in the toner cartridge. In
some cases, white streaks or light printing will still occur even
after you have redistributed the toner.
1 Open the front cover.
2 Pull the toner cartridge out.
3 Thoroughly roll the toner cartridge 5 or 6 times to
distribute the toner evenly inside the toner cartridge.
NOTE: If toner gets on your clothing, wipe it off with a dry
cloth and wash clothing in cold water. Hot water sets toner into
fabric
----------------------------------------------------------------------------------------------
Changing cartridge:
_______________________________________________________

CAUTION: Do not touch the green underside of the toner
cartridge. Use the handle on the toner cartridge to avoid
touching this area.

4 Hold the toner cartridge by the handle and slowly insert
the toner cartridge into the opening in the machine.

5 Tabs on the sides of the toner cartridge and corresponding
grooves within the machine will guide the toner cartridge
into the correct position until it locks into place completely.

6 Close the front cover. Make sure that the cover is securely
closed.

Replacing the toner cartridge
When the toner cartridge is completely empty:

• The printer stops printing.

• The Smart Panel program window appears on the computer
telling you that the toner cartridge is empty.

• The Status LED lights red.

At this stage, the toner cartridge needs to be replaced. For
order information for toner cartridges, see page 7.1.

1 Pull the toner cartridge out.

2 Remove the new toner cartridge from its bag.

3 Roll the toner cartridge 5 or 6 items to distribute the toner
evenly inside the toner cartridge.

Thoroughly rolling the toner cartridge will assure
maximum copies per toner cartridge.

4 Remove the paper protecting the toner cartridge.

NOTE: If toner gets on your clothing, wipe it off with a dry
cloth and wash clothing in cold water. Hot water sets toner into
fabric.

CAUTION: Do not touch the green underside of the toner
cartridge. Use the handle on the toner cartridge to avoid
touching this area.

5 Hold the toner cartridge by the handle and slowly insert
the toner cartridge into the opening in the machine.

6 Tabs on the sides of the toner cartridge and corresponding
grooves within the machine will guide the toner cartridge
into the correct position until it locks into place completely.

7 Close the front cover. Make sure that the cover is securely
closed.
_______________________________________________

Good Luck!

Samsung SCX-4300... | Answered on May 10, 2017

Not finding what you are looking for?
Samsung SCX-4300 Monochrome Laser Multifunction Printer Logo

594 questions posted

Ask a Question

Usually answered in minutes!

Top Samsung Office Equipment & Supplies Experts

HEMANT GROVER

Level 2 Expert

171 Answers

Victorman
Victorman

Level 3 Expert

846 Answers

jasbo
jasbo

Level 3 Expert

2239 Answers

Are you a Samsung Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

SCX Samsung

  • SCX Samsung

Most Popular Question

toner exhasted error in samsung scx

  • Office Equipment & Supplies
Loading...