20 Most Recent Sharp MX-2700N Color Copier - Page 7 Questions & Answers


Use SIM14 to
cancel the trouble.

Entering the simulation mode
1) Copy mode key ON → Program key ON → Asterisk (*) key
ON → CLEAR key ON → Asterisk (*) key ON → Ready for input of a main code of simulation
enter 14
accpet yes clear..
machine should restart.
You may have to have a tech look into why this is jamming...

Hope that helps
Lbcoaster

Sharp MX-2700N... | Answered on Mar 29, 2011


Go to system setting, under printer setting there's a menu to forced output print or A4/Letter changing, if you can not find it try the key operator program/ admin mode ( default password for admin is admin )

Sharp MX-2700N... | Answered on Mar 11, 2011


Believe it or not, it means "Check All". It's kind of like a Check Engine light in a car. Typically it is caused by a door not being closed completely. On your model, the most likely culprit is the door on the right side of the machine that slides out on rails. Open it, make sure there are no obstructions, and slam it shut. These machines are notorious for the right side door becoming slightly warped, and they don't recognize that the door is shut if you try to gently close it. Don't try to knock the machine off of it's stand when you close it, but do it quickly and with a bit of purpose.

Sharp MX-2700N... | Answered on Feb 28, 2011


OK, the ping just tells you the computer can talk to the printers through the network connection. You need to enter the Printer/Copiers Configuration and make sure it is setup to print from the TCP/IP connection. Some of these will let you setup the connection but will not use it unless you tell it to.

Sharp MX-2700N... | Answered on Feb 11, 2011


CE-00 means the copier cannot find the computer or server it's directed to scan to.

The usual cause is that the IP address for the scan destination has been changed by DHCP and the connection info has not been updated in the copier.

To resolve, reboot the destination workstation or server. Or, right-click on the Network Scanner Tool icon in the tray, select Automatic Profile Update, and click on Update Now.

If the scan profiles were created in the webpage and not through Sharpdesk/NST, make sure that destination names and/or IPs have not changed in the profile.

If you are using DNS name resolution instead of direct IP addressing, you must be sure that the DNS server IPs are correctly entered into the web page.

Hope this helps!!

Sharp MX-2700N... | Answered on Feb 10, 2011


only update printer driver, and also check the lan cable

Sharp MX-2700N... | Answered on Feb 07, 2011


The SPF is the ADF > the doccument feeder on top of the copier. Do you only get black lines when you use the ADF? When you lift the ADF up and you see the copy board glass > there is a small **** of glass on the side of the big piece of glass..... Clean the small piece of glass with windex and that should take care of your problem... Good Luck

Sharp MX-2700N... | Answered on Feb 05, 2011


after call for service, the machine will indicate an error code like H4, F2,etc. if you can give me the code i will know what to do

Sharp MX-2700N... | Answered on Feb 03, 2011


in order press * # C # then enter the number 16 and execute the function.
that should clear any U2 code

Sharp MX-2700N... | Answered on Jan 29, 2011


U2-10 SRAM user authentication index check sum error. I know, gibberrish right? To clear this error, put the machine in "simulation mode" by pressing "c" "*" "p" "*". then type 16, press the copy button, then press "execute" then press "yes". Hit the "ca" button to go back to ready. This should clear the error code. If the code returns, then the PCU PWB board needs to be replaced. I hope this helps.

Sharp MX-2700N... | Answered on Jan 28, 2011


Hallow, this occurs due to the document glass problem. This may be due to powering it on when the glass is removed or the glass being locked in the reverse side. This may also be as a result of copy lamp being off.
Solution
  • Check that the copy lamp is lighting well. Check for the copy board of replace copy lamp.
  • Check that the document glass is well screwed and the white part should be in the front side.
  • This does not need resetting once you do the above , it should not show again.
Please do those processes with caution not to break the fluorescent lamp which is fragile.

Sharp MX-2700N... | Answered on Dec 08, 2010


To reset an H5-01 code, enter simulation mode. To do this on the operation panel of the mfp hit
#, *, C, *. Then type in 14, execute. Then press Clear All, CA, to reboot the machine.

Sharp MX-2700N... | Answered on Nov 11, 2010


To get to service mode, press the # key, the * (star) key, the C (clear) key, then the * (star) key again in rapid succession. This will bring you to the service (simulation) mode.

Sharp MX-2700N... | Answered on Nov 04, 2010


This code means the Black Developer powder has reached the end of its life A service call will be needed to replace this for good black prints

Sharp MX-2700N... | Answered on Jul 20, 2010


Ok so the TA code means that the all maintenance counter has reached its limit
To clear this you need to clear this easy you want
# , * , c , *
To enter service mode
Type in code 24 press start
Then you want sub code 04
Then you can select what you want to clear so the maintenance count all
Execute this yes then press the CA key the machine will restart and away you go
I also do advise that you service representative comes along at some point to check the machine it could need parts because if you stretch the life of parts your machine could become unreliable... But that is up to you

Sharp MX-2700N... | Answered on Jul 13, 2010


Ok so the TA code means that the all maintenance counter has reached its limit
To clear this you need to clear this easy you want
# , * , c , *
To enter service mode
Type in code 24 press start
Then you want sub code 04
Then you can select what you want to clear so the maintenance count all
Execute this yes then press the CA key the machine will restart and away you go
I also do advise that you service representative comes along at some point to check the machine it could need parts because if you stretch the life of parts your machine could become unreliable... But that is up to you.

Sharp MX-2700N... | Answered on Jul 13, 2010

Not finding what you are looking for?
Sharp MX-2700N Color Copier Logo

226 questions posted

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts

Anthony Karuku

Level 2 Expert

268 Answers

amir hamza
amir hamza

Level 2 Expert

318 Answers

k24674

Level 3 Expert

8081 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Sharp Office Equipment & Supplies

  • Sharp Office Equipment & Supplies

Most Popular Question

code h4 30 sharp mx 2700n reset

  • Office Equipment & Supplies
Loading...