20 Most Recent Schlage Camelot Deadbolt Keypad, Satin Nickel #FE595VCAMXACC619 - Page 8 Questions & Answers


With only 3 digits trial and error should get you there in just over twelve minutes, or approximately 500 tries...good luck! Use a system and keep track.

Locks &... | Answered on Jul 24, 2019


perhaps you need to change / add user codes? (don't forget to change default pass-code too) https://youtu.be/UAZ4Bwbz8eU https://youtu.be/71t7ybLQzME https://youtu.be/58D5vR-tBfA



Locks &... | Answered on Jul 13, 2019


i have little respect for safes that use batteries ever since i heard many can be "bumped" to open them. bumping is little more than one hand on handle to open safe and one hand holding a mallet (hard rubber to protect finish) then hit safe from different angles while gently trying to turn handle to open position. it's same principle as opening a pin tumbler with an oscillating device (VI- BRAY - TOR). takes a soft touch and a little patience until you get feel of technique then will be easy in just a few seconds.... Telling us the model/manufacture might be a good idea too

Locks &... | Answered on Jul 13, 2019


I read this elsewhere. it's worth a try...
"I had the same problem, batteries dead and i could not find the keys. I read on the internet that if you get a hairdryer, and heat up the front of the safe where the keypad is and where the spare key goes in this will work, i thought anything is worth a try. So i held the hairdryer there for a bout 15 mins and what happens is the heat slowly boosts the battery life, enabling you to open the safe. You will notice that you start to get a beep noise from the key pad. even though i was getting a beep from the pad it didnt open straight away but after about 10 mins i retried the code and it worked. Make sure you replace the batteries immediately before closing the safe again "

Locks &... | Answered on Jul 10, 2019


yeah it sounds like it's not installed properly. that's not supposed to happen. there is supposed to be a keeper ring and back plate with 2 or more screws that holds that in place

Locks &... | Answered on Jun 19, 2019


notify manufacturer or locksmith

Locks &... | Answered on Jun 19, 2019


My lock just comes with a key which I've lost. It doesn't have a combination as well.

Locks &... | Answered on Jun 10, 2019


aaaahhhh no notify manufacturer for assistance and other choice you dont want to notify -

Locks &... | Answered on Jun 08, 2019


dont know but try manufacturer who would know and can also try a locksmith

Locks &... | Answered on Jun 06, 2019


Here you have a tutorial to factory reset codes of an electonc safe

How to reset code on an electronic safe

If it won't work for you, pleas contact Sandleford's website

Sandleford Security Safes

See contact data of Sandleford


Sandleford Contact

Locks &... | Answered on Jun 04, 2019

Not finding what you are looking for?
Schlage Camelot Deadbolt Keypad, Satin Nickel #FE595VCAMXACC619 Logo

33 questions posted

Ask a Question

Usually answered in minutes!

Top Schlage Locks & Locksmithing Experts

JOHN LAPIER

Level 3 Expert

2591 Answers

Mike

Level 3 Expert

4362 Answers

Cindy Wells

Level 3 Expert

6028 Answers

Are you a Schlage Lock and Locksmithing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Schlage Locks & Locksmithing

  • Schlage Locks & Locksmithing

Most Popular Question

schlage keypad lock not unlock due

  • Locks & Locksmithing
Loading...