Lexmark X4650 InkJet Printer - Page 6 - Answered Questions & Fixed issues


if you lost your starter disk you can still download it to internet just type installer/model of your printer.thanks

Lexmark X4650... | Answered on Aug 08, 2011 | 37 views


Check to see if the cartridge is clogged or running out of ink.

Lexmark X4650... | Answered on Aug 07, 2011 | 107 views


Why would you ever, ever use the CD a thing came with to install drivers? The ones online at the maker's sites (or service site) are, bar few, much better choices.
Outside of that, if they're both 802.11g, they'll both have sync buttons so you can just hit the one on the router, then the printer, push printer buttons in an affirming way, then go to your laptop and print the queue (or backlog, or whatever.)

Lexmark X4650... | Answered on Aug 06, 2011 | 57 views


Hi

May you remove or uninstall by mistake that's way is not showing now don't install again to follow the mention below instruction.


1) Plug on you USB cable to PC and power on the printer.
2) Put the Lexmark printer software installation CD in you computer CD-Rom.
3) Open the CD-Rom, and duble click the setup exe.
4) The setup will take few minute to install the driver.
5) After installing the driver reboot your computer. and start to printing

Cheer






Lexmark X4650... | Answered on Aug 03, 2011 | 80 views


Please refer to this article - How to Set Up the Lexmark X3600 or X4600 Series All-In-One.

Sometimes the ink cartridge carrier won't automatically move to its loading position even when the printer is on and the cover is open. Follow the steps below:


1. Unplug the printer from the power source.

2. With the cover open, hold the solid white strip that connects from the carrier assembly to the ink cartridge carrier and gently slide the cartridge carrier to the center of the printer.

3. Remove the used cartridges.

4. Load the new cartridges. Close the cover.

5. Plug the printer back to the power source.

Lexmark X4650... | Answered on Aug 03, 2011 | 41 views


Hello, Corinne.

For some reason, even though your printer is seen by your wireless network, not seen by your computer.

From your responses, I was unable to tell if you have:

Removed and reinstalled the Lexmark x4650 on your computer

If you have reinstalled and are still experiencing problems, set up your wireless printer on your network again. Let me know if your don't have the setup instructions. Then, you may need to reinstall the printer on your computer.

Hope this helps.

Lexmark X4650... | Answered on Aug 03, 2011 | 370 views


Good job in re-seating the cartridges into the printer. Try to insert a different known working cartridge to determine if your other cartridge has gone bad.

Lexmark X4650... | Answered on Aug 02, 2011 | 381 views


If you haven't setup a PIN for scanning, try to update your printer driver. Please visit the Lexmark website at http://bit.ly/iofMNC to download the driver. Execute the file to update your existing printer driver.

Lexmark X4650... | Answered on Aug 01, 2011 | 109 views


You might have put it in incorrectly. Sometimes it could be as simple as taking the cartridge out and putting it back head but make sure it is snapped in correctly. Also, you could try unplugging the machine, taking the cartridge out and then replacing it once the machine is on. That could work as well. If it doesn't let me know.

Lexmark X4650... | Answered on Jul 26, 2011 | 667 views


Unplug the power supply(the black box behind the printer where the power cord is attached).
Hold down Start and Cancel buttons at the same time while plugging back the power supply.
Keep on holding down the 2 buttons firmly until English Language Selection appears on the the display.

Lexmark X4650... | Answered on Jul 21, 2011 | 246 views


You can download the Lexmark printer drivers from theirsupport WEB site. Please click on this link and select your model printer todownload :-http://support.lexmark.com/index?page=home&locale=EN&userlocale=EN_US&segment=DOWNLOAD

Lexmark X4650... | Answered on Jul 18, 2011 | 36 views


Hi Kim

Please get the information from this link you will get the idea

http://support.lexmark.com/index?page=content&productCode=LEXMARK_X7675&segment=SUPPORT&viewlocale=en_US&searchid=1262004228106&actp=search&userlocale=EN_US&id=SO4927

Regards

Lexmark X4650... | Answered on Jul 16, 2011 | 174 views


I'm sorry if I am not following you but can you explain further what you need to do with your Lexmark printer?

Lexmark X4650... | Answered on Jul 05, 2011 | 147 views


There could be something blocking the paper path. Unload the sheets of paper from the feeder. Grab a flashlight and look into the feeder for any foreign objects that might have accidentally fallen into it.
Also, try to check the cartridge area for any obstructions. Open the printer cover and make sure the paper path and the cartridge carrier path are clear from debris or foreign objects.

Lexmark X4650... | Answered on Jul 01, 2011 | 39 views


Try to remove the sheets of paper from the feeder. Grab a flashlight and look into the feeder for any foreign objects that might have accidentally fell into it. If feeder is clear, open the printer cover and remove the cartridges. While the printer cover is open, check inside for any obstructions in the paper path. If none, then close the printer cover. Unplug and re-plug the printer into the power source to reset it. When the printer turns on, reinsert the cartridges. Close the cover. Load some paper (avoid overloading). Try to print again.
If problem continues, please contact Lexmark Technical Support Center for additional assistance.

Lexmark X4650... | Answered on Jul 01, 2011 | 77 views


To fix the carrier jam, open the printer cover. Remove the cartridges from the carrier. While the cover is open, check inside for any loose transparent strip - the encoder strip. The encoder strip ensures the proper mechanism of the carrier on the assembly. If everything looks fine inside the printer, close the cover. Unplug and re-plug the printer into the power source to reset it. When the printer turns on, re-insert the cartridges and make sure they are properly inserted and secured in the carrier.

Lexmark X4650... | Answered on Jul 01, 2011 | 310 views


Note that a refilled cartridge will not be able to report its ink level. Check if correct ink level is displayed on your printer operator panel. Press Setup button > Maintenance > Ink Level - check your black and color ink levels. If ink levels are correct, then the problem could be on your computer.
The Print Spooler service on your computer may be disabled. To enable the Print Spooler service, follow the steps below:
  1. Browse to Start -> Run... and type in "NET STOP SPOOLER" (this will stop the print spooler service)
  2. Type in "NET START SPOOLER" (this will restart the print spooler service)
Try to check your ink levels again.

Lexmark X4650... | Answered on Jun 30, 2011 | 283 views


Make sure the Lexmark X4650 printer driver is updated. You can update your printer driver by downloading and installing the downloadable driver from the Lexmark website at http://bit.ly/iofMNC. Select your operating system, download and execute the file. Try to scan again and see the difference.
You can also try to lower the scan resolution (dpi setting) on your computer by launching the Lexmark Productivity Studio application. Select Scan > on the "What are you scanning?" screen, click Custom Settings > decrease the dpi setting to 200 or 150. Try to scan again.
You may also use third party scan softwares to decrease the scan file size if results are still too large for you.

Lexmark X4650... | Answered on Jun 29, 2011 | 114 views


for the specified ink to be use it has a specifications that can be seen in the box of the printer, even the manual has the description about the ink specifications, the least to do is you have to bring with you the printer to the refilling station.

Lexmark X4650... | Answered on Jun 22, 2011 | 21 views


Try to re-install the Lexmark X4650 driver. Visit the Lexmark website at http://bit.ly/iofMNC. Select your operating system, download the driver and execute the file.

Lexmark X4650... | Answered on Jun 20, 2011 | 55 views

Not finding what you are looking for?
Lexmark X4650 InkJet Printer Logo

675 questions posted

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...