20 Most Recent Weiser Lock POWERBOLT ELEC DEADBOLT - Page 5 Questions & Answers


I have installed your Powerbolt, but when I push the Lock Button, it unlocks? What should I do?

First remove the cover on the inside of the Powerbolt unit. On the right hand side under the batteries, you will notice that is says "Door Direction Jumper". If the cap is mounted on Prongs 1 & 2, carefully remove it and move it over so that it mounts Prongs 2 & 3. A is right handed, B is left handed.

Programming/troubleshooting instructions:

http://www.weiserlock.com/Support/Faq/50160000000HhhZAAS.aspx

Weiser Lock... | Answered on May 09, 2011


Follow this link for battery replacement and programming:

http://www.weiserlock.com/Support/Faq/50160000000HhhZAAS.aspx

Weiser Lock... | Answered on May 08, 2011


Troubleshooting instructions for the Weiser Powerbolt can be found here:

http://www.weiserlock.com/Support/Faq/50160000000HhhZAAS.aspx

Any misalignment of the parts can cause a mechanical bind in the lock if it is otherwise trying to operate.

Weiser Lock... | Answered on Apr 18, 2011


Troubleshooting instructions for the Weiser Powerbolt can be found here:

http://www.weiserlock.com/Support/Faq/50160000000HhhZAAS.aspx

Weiser Lock... | Answered on Apr 18, 2011


This link to the troubleshooting page addresses possible problems if your lock is beeping:

http://www.weiserlock.com/Support/Faq/50160000000HhhZAAS.aspx

There is also a link to the Customer Service page for further assistance directly from Weiserlock.

Weiser Lock... | Answered on Apr 10, 2011


powerbolt 1000

http://www.weiserlock.com/Support/Faq/50160000000HhhZAAS.aspx

Here's a link to the Frequently Asked Questions page for the Powerbolt 1000:

http://www.weiserlock.com/Support/Faq/50160000000HhhZAAS.aspx

The instructions for reprogramming the code can be found there. Good luck!!

Weiser Lock... | Answered on Apr 08, 2011


Did you accidentally remove the jumper that determines the "handedness" of the lock?

First remove the cover on the inside of the Powerbolt unit. On the right hand side under the batteries, you will notice that is says "Door Direction Jumper". If the cap is mounted on Prongs 1 & 2, carefully remove it and move it over so that it mounts Prongs 2 & 3. A is right handed, B is left handed.

Here's a link which tells you how to remove the cover, and reprogram the lock codes:

http://www.weiserlock.com/Support/Faq/50160000000HhhZAAS.aspx

Weiser Lock... | Answered on Mar 19, 2011


I don't have a direct answer, but I can steer you to the Customer Service web page for Weiser locks:

http://www.weiserlock.com/en/CustomerService/ProductSupport/SupportContact.aspx

There you will find the toll-free number for their Customer Service (Call Us
Toll Free: 800-677-LOCK (Mon-Sat, 7:30am - 4:00pm PST)

as well as FAX and mailing information. Good luck!

Weiser Lock... | Answered on Mar 08, 2011


Your best bet is to contact weiserlock's cutomer service directly. Here is a link to the contact information:

http://www.weiserlock.com/en/CustomerService/ProductSupport/SupportContact.aspx

good luck!

Weiser Lock... | Answered on Mar 06, 2011


I can't help you directly, but Weiser customer support contacts can be found on this page:

http://www.weiserlock.com/en/CustomerService/ProductSupport/SupportContact.aspx

Good luck!

Weiser Lock... | Answered on Mar 06, 2011


Here's a link which tells you how to remove the cover, and reprogram the lock codes:

http://www.weiserlock.com/Support/Faq/50160000000HhhZAAS.aspx

Weiser Lock... | Answered on Mar 05, 2011


.

Here's a link which tells you how to remove the cover, and reprogram the lock codes:

http://www.weiserlock.com/Support/Faq/50160000000HhhZAAS.aspx

Weiser Lock... | Answered on Mar 05, 2011


Here's a link to the Frequently Asked Questions page for the Powerbolt 1000:

http://www.weiserlock.com/Support/Faq/50160000000HhhZAAS.aspx

The instructions for changing the batteries and reprogramming the code can be found there. Good luck!!

Weiser Lock... | Answered on Mar 05, 2011


Here's a link to the Frequently Asked Questions page for the Powerbolt 1000:

http://www.weiserlock.com/Support/Faq/50160000000HhhZAAS.aspx

The instructions for accessing the batteries can be found there. Good luck!!

Weiser Lock... | Answered on Mar 05, 2011


Here is a link to the Frequently asked question page for your lock:

http://www.weiserlock.com/Support/Faq/50160000000HhmZAAS.aspx

I have installed your Powerbolt, but when I push the Lock Button, it unlocks? What should I do?
First remove the cover on the inside of the Powerbolt unit. On the right hand side under the batteries, you will notice that is says "Door Direction Jumper". If the cap is mounted on Prongs 1 & 2, carefully remove it and move it over so that it mounts Prongs 2 & 3. A is right handed, B is left handed.

Here's a link which tells you how to remove the cover, and reprogram the lock codes:

http://www.weiserlock.com/Support/Faq/50160000000HhhZAAS.aspx

Weiser Lock... | Answered on Mar 05, 2011


Here's a link to the Frequently Asked Questions page for the Powerbolt 1000:

http://www.weiserlock.com/Support/Faq/50160000000HhhZAAS.aspx

The instructions for accessing the batteries and reprogramming the code can be found there. Good luck!!

Weiser Lock... | Answered on Mar 05, 2011


Here's a link to the Frequently Asked Questions page for the Powerbolt 1000:

http://www.weiserlock.com/Support/Faq/50160000000HhhZAAS.aspx

The instructions for reprogramming the code can be found there. Good luck!!

Weiser Lock... | Answered on Mar 05, 2011


Have you changed the batteries recently? If you have and the problem still exists, there is a reset code in the manual. Also, keep in mind that these locks hold two separate codes in them, when changing codes, make sure you change both of them. You acn find a copy of the manual here: http://www.smarthomeusa.com/Products/ED1460XXXX/manuals/WeiserLockPowerbolt1000-manual.pdf

Weiser Lock... | Answered on Mar 05, 2011


Here's a link to the Frequently Asked Questions page for the Powerbolt 1000:

http://www.weiserlock.com/Support/Faq/50160000000HhhZAAS.aspx

The instructions for reprogramming the code can be found there.  Good luck!!

Weiser Lock... | Answered on Mar 05, 2011


Here is a link that will show you how to remove the cover:

http://www.weiserlock.com/Support/Faq/50160000000HhhZAAS.aspx

Good luck!

Weiser Lock... | Answered on Mar 05, 2011

Not finding what you are looking for?
Weiser Lock POWERBOLT ELEC DEADBOLT Logo

149 questions posted

Ask a Question

Usually answered in minutes!

Top Weiser Lock Locks & Locksmithing Experts

Azam Ali

Level 1 Expert

31 Answers

Scoee Scoffer

Level 2 Expert

162 Answers

Cindy Wells

Level 3 Expert

6029 Answers

Are you a Weiser Lock Lock and Locksmithing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Weiser Lock Locks & Locksmithing

  • Weiser Lock Locks & Locksmithing

Most Popular Question

need change code

  • Locks & Locksmithing
Loading...