20 Most Recent Weiser Lock POWERBOLT ELEC DEADBOLT - Page 9 Questions & Answers


Here's a link to the Frequently Asked Questions page for the Powerbolt 1000:

http://www.weiserlock.com/Support/Faq/50160000000HhhZAAS.aspx

The instructions for reprogramming the code can be found there. Good luck!!

Weiser Lock... | Answered on Mar 26, 2011


Here's a link which tells you how to remove the cover, and reprogram the lock codes:

http://www.weiserlock.com/Support/Faq/50160000000HhhZAAS.aspx

Weiser Lock... | Answered on Mar 12, 2011


I have installed your Powerbolt, but when I push the Lock Button, it unlocks? What should I do? First remove the cover on the inside of the Powerbolt unit. On the right hand side under the batteries, you will notice that is says "Door Direction Jumper". If the cap is mounted on Prongs 1 & 2, carefully remove it and move it over so that it mounts Prongs 2 & 3. A is right handed, B is left handed.

Weiser Lock... | Answered on Mar 06, 2011


Here's a link which tells you how to remove the cover, and reprogram the lock codes:

http://www.weiserlock.com/Support/Faq/50160000000HhhZAAS.aspx

Weiser Lock... | Answered on Mar 05, 2011


Hello Annette.... Here is the link to the installation sheets for all of the weiser keyless locks. There are several models so you will have to identify your lock and then take a look at the sheet for that lock to know how to change the batteries

http://www.weiserlock.com/en/CustomerService/ProductSupport/SupportContact.aspx

Joe
Thanks for choosing Fixya!

Weiser Lock... | Answered on Jan 06, 2011


here see if this helps ya. manual.pdf

Weiser Lock... | Answered on Mar 24, 2010


if not a key hole stick small screwdriver or any small flat devise into handle and turn will unlock passive door handle

Weiser Lock... | Answered on Oct 19, 2009


try this site ...

http://www.totalproductsales.com/acatalog/info_58.html

Weiser Lock... | Answered on Sep 21, 2009


The lock tang (the item between the two lock parts inside the door) has been turn 180 degree out of position. Take the lock off, turn tang 180 degrees, reassamble, and it should work like new.

Weiser Lock... | Answered on Sep 01, 2009

Not finding what you are looking for?
Weiser Lock POWERBOLT ELEC DEADBOLT Logo

149 questions posted

Ask a Question

Usually answered in minutes!

Top Weiser Lock Locks & Locksmithing Experts

Azam Ali

Level 1 Expert

31 Answers

Scoee Scoffer

Level 2 Expert

162 Answers

Cindy Wells

Level 3 Expert

6032 Answers

Are you a Weiser Lock Lock and Locksmithing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Weiser Lock Locks & Locksmithing

  • Weiser Lock Locks & Locksmithing

Most Popular Question

need change code

  • Locks & Locksmithing
Loading...