Intermatic Inc. ST01C Digital In-Wall Timer - Answered Questions & Fixed issues


Your INTERMATIC ST01C Digital In-Wall Timer is
not compatible with a REGULAR three-way switch
configuration...

((besides being a rather poor timer ( my opinion ))).

Following WIRE colors is TOTALLY INCORRECT...
(and dangerous).

The only way you can "use" this switch is to OVER-RIDE
both 3 way switches...

BUT YOU SERIOUSLY
NEED to KNOW WHAT you are doing...!!

I would seriously recommend you consider "SMART"
switches... Check out home automation or
SMART-HOME ... Insteon... X10 or even
LEVITON's remote capable switches...

Each end of a "3-way" circuit work closely together...
are HARD-WIRED and CANNOT be easily, conveniently
or safely overridden (in my opinion).

Hope this helps...

Naaah...
Intermatic KM2STU 1G 1 Gang SPDT 24 Hour Mechanical Timer Amazon com

Nope...!!
Intermatic ST01 Series Easy Setting Manual Programming Fixed Time

One (apple) possibility (ALEXA enabled devices)
Eve Light Switch Connected Wall Switch with Apple HomeKit technology for...

Another remote
(X10 technology (less proprietary & ALEXA compatible))
https://www.amazon.com/s/ref=nb_sb_ss_i_3_11?url=search-alias%3Dtools&field-keywords=insteon+hub+pro+homekit&sprefix=insteon+hub%2Ctools%2C276&crid=3QBCXIC1GUTKD&rh=n%3A228013%2Ck%3Ainsteon+hub+pro+homekit

Hope this inspires...

Carnac the Magnificent

Intermatic Inc.... | Answered on May 28, 2018 | 491 views


The programming does not work on my model TM 74 so I will be returning it to Lowe's.

Intermatic Inc.... | Answered on Dec 13, 2014 | 3,121 views


Replace CR2 battery, then reset timer.
If functionality is not restored, then replace timer:
http://waterheatertimer.org/ST01C-program.html#battery

Gene

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Intermatic Inc.... | Answered on Aug 12, 2014 | 166 views


http://waterheatertimer.org/ST01C-program.html

Gene

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Intermatic Inc.... | Answered on Aug 12, 2014 | 87 views


Mine sometimes switches itself (!) From AUTO or PGM to SETUP. Simply use your fingernail to open top of door/switch and touch "Mode" button until it reads PGM or AUTO or MAN, as you wish.

Intermatic Inc.... | Answered on Jul 31, 2014 | 154 views


Reset timer by holding down on-off button then press and release small round reset button. Then release on-off button. Display should flash 12:00
This timer uses CR2 battery.
If functionality is not restored after new battery and reset, then timer has probably gone bad?
http://waterheatertimer.org/ST01C-program.html
ST01 timer has 1 year warranty from intermatic.com

gene
h

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Intermatic Inc.... | Answered on Jul 28, 2014 | 92 views


Do not go to Utilitech.com; it's a different company. It's actually at place called TheNCC and is in tiny, tiny print at the bottom of the instructions.

Instead, go to:
http://thencc.com/ncc/support_results.asp?criteria=192773&Submit=Go&SearchRun=RunGo

You should find a PDF for the product and then zoom in to be able to read the instructions. I was not able to read instructions that came in packaging.

Intermatic Inc.... | Answered on Mar 13, 2017 | 14,894 views


where can I fine repair parts for a utilitech pumps 1.5 hp. lawn pump

Intermatic Inc.... | Answered on Apr 24, 2014 | 526 views


Don't put timer at ground level where it can get wet of covered with snow.
Otherwise will work in any position as long as photoeye turned away from lights.
http://waterheatertimer.org/Woods-timers-and-manuals.html#photo-eye

Gene
h

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Intermatic Inc.... | Answered on Nov 27, 2013 | 146 views


Go to lowes or home depot and get a book on simple wiring. they have the same ones at the library.

Intermatic Inc.... | Answered on Nov 08, 2013 | 144 views


Add a comment with more information:
1) Brand and model number of fan and remote so expert can access product manual. Without product manual, we're guessing. If product manual has a phone number call it.
2) Attach clear in-focus photo of existing switch with all wires for best possible guess.
3) get a tester and find which wire inside the box is hot. Turn off switch and test each black wire to bare ground wire.

Gene
h

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Intermatic Inc.... | Answered on Sep 16, 2013 | 53 views


Which timer?
Is timer new or old?
http://waterheatertimer.org/How-to-wire-timers.html
http://waterheatertimer.org/ST01C-program.html#battery
Add a comment with more information
Gene
h

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Intermatic Inc.... | Answered on Sep 13, 2013 | 109 views


Intermatic does not post schematic for ST01C timer, and I have not taken my timer apart to see if a gear is loose.
http://waterheatertimer.org/Intermatic-timers-and-manuals.html
Add a comment and describe timer in detail. Attach a photo.
Buy another timer and do not take apart, since these timers are sealed to meet UL electrical and fire-shock safety standards.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Intermatic Inc.... | Answered on Jun 12, 2013 | 24 views

Not finding what you are looking for?
Intermatic Inc. ST01C Digital In-Wall Timer Logo

334 questions posted

Ask a Question

Usually answered in minutes!

Top Intermatic Hardware & Accessories Experts

Gene Haynes

Level 3 Expert

5353 Answers

Mike

Level 3 Expert

4363 Answers

Cindy Wells

Level 3 Expert

6034 Answers

Are you an Intermatic Hardware and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...