Tip & How-To about LG WM-2277HW Front Load Washer
First, clean off the bottom of the door glass where it contacts the gray tub gasket when the door closes. Any hair or other build up can result in leakage. Second, if that does not completely solve your leak, you can move the location of the spring which holds the tub gasket from the very bottom (6 O'clock position) to the hinge area (9 O'clock position). Third: Sometimes, the reason you get a leak is due to the installation. If the washer was pushed into place by applying pressure in the center front of the washer, the outer front panel can be slightly deformed (inwerd) resulting in leakage from the door. If that is the case, sometimes you can remove the outer clamp and outer part of the gray seal and pull out on the front panel to correct the situation if it is not too severe, rather than replacing the entire front panel.
Posted by Carl... on
May 09, 2010 | LG TROMM WM2688H 4.0 cu.ft. Front Loading...
Oct 20, 2009 | LG WM-2277HW Front Load Washer
Jun 25, 2009 | LG WM-1832C Front Load Washer
Jan 11, 2009 | LG WM-1832C Front Load Washer
May 11, 2007 | Whirlpool 24 in. DU920PW Built-In...
3,637 people viewed this tip
Usually answered in minutes!