Question about Tomtom ONE GPS Receiver

1 Answer

I go to the start up screen and all is well. The moment I try to find an address it reboots! I have been able to find my location on the point on map icon, then i can scroll through the map and find the street and goto my destination but this ii only when I am already close to the destination

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Tomtom Master
  • 514 Answers

There's a possibility that the navigation software is corrupted.
Have you tried to recover it from your backup (on your computer) ?
Otherwise, you'll want to use TomTom Home to see if you can download and re-install the software from the tomtom webiste.
Recently, TomTom has decided to limit/stop support (including software/maps, etc.) for certain (older) models of TomTom GPS. If your model is one of those, you're out of luck. TomTom is trying to have you buy a new model.

Posted on Jun 30, 2019

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

SOURCE: removing previous destination

I hit Guan by mistake but meant to enter new york. How can I change it to new york?

Posted on Dec 26, 2007

  • 78 Answers

SOURCE: map not updated

Update your maps through TomTom Home. Tele Atlas regularly provides mapping updates for TomTom devices, so if your maps aren't updated, this is likely the cause of the issue.

Posted on Dec 29, 2008

  • 341 Answers

SOURCE: my newly bought tomtom one 140s has given me

This is a very common problem with ANY brand of GPS. Even if you have the most current and updated map, there are some mistakes in the GPS addresses. It should only happen occasionally, maybe once every couple of weeks. As I said before, it's not unheard of for TomTom, Garmin, Magellan or any bradn of GPS

Posted on Mar 30, 2010

nburn28
  • 113 Answers

SOURCE: map not updated

Support for TomTom at 1-800-585-2494

Posted on Apr 12, 2016

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will not leave startup screen


Time to reboot and to try to enter safe mode. See if it gets you past the startup screen. If it does, you can try to access a system restore point which preceded the day of your problem. Alternatively, you can try the sfc command or easier yet, download Glary Utilities and go to the section where you can choose to have the computer scan for bad or missing files and fix or add them. Depending upon your operating system, you may have other options at your finger tips. When you reboot, hit F8 repeatedly before a Windows screen appears in order to have the option to enter safe mode. Might as well choose the one with network connections if you intend to download and install Glary Utilities. There are more options available to address this.

Aug 10, 2017 | Computers & Internet

1 Answer

I have a Nav one cobra gps and when I try to enter and address and start Navigation it always goes to an Illinois start point it will not start from my current location. Im in West Virginia


PDF]8500 PRO HD - Cobra Electronics

https://www.cobra.com/.../8500PROHD_MANL_0.pdf
Cobra ElectronicsOct 24, 2013 - Before installing and using the Cobra Navigation System, please read... DO position the unit so the screen can be viewed with just a ...... and may beincorrect. .... Select one of locations on the list then tap the GO button to route directly ... begin moving, the system will use the GPS information to update your ...

Nov 28, 2015 | Cobra GPS

2 Answers

HP had blue screen and said it would shut down. Problem is that it does turn off, so that it can be re-booted. Have tried to shut off PC, but continues to come on and not start.


Hold the power button in for 10 to 15 seconds for hard shut down if that doesn't work unplug power for about 5 minutes then plug power back in and see what happens

Jan 06, 2011 | HP Pavilion a1000n (PS567AA) PC Desktop

1 Answer

Reset cisco airnet 1130ag


There are 2 ways to reset the access point.

Using the MODE Button

Follow these steps to delete the current configuration and return all access point settings to the factory defaults by using the MODE button:

1. blank.gifOpen the access point cover

2. blank.gifDisconnect power from the access point (the power jack for external power or the Ethernet cable for in-line power).

3. blank.gifPress and hold the MODE button while you reconnect power to the access point.

4. blank.gifContinue pressing the MODE button until the Ethernet LED turns amber. (approximately 2 to 3 seconds). Then release the button.

5. blank.gifAfter the access point reboots, you must reconfigure it using the web browser interface, the Telnet interface, or the access point console port.
Using the Web Browser Interface

Follow these steps to delete the current configuration and return all access point settings to factory defaults using the web browser interface:

1. blank.gifOpen your Internet browser. You must use Microsoft Explorer (version 5.x or later) or Netscape Navigator (version 4.x or later).

2. blank.gifEnter the access point IP address in the browser address line, and press Enter. An Enter Network Password screen appears.

3. blank.gifEnter the username Cisco in the User Name field.

4. blank.gifEnter the password Cisco in the Password field and press Enter. The Summary Status page appears.

5. blank.gifClick System Software. The System Software screen appears.

6. blank.gifClick System Configuration. The System Configuration screen appears.

7. blank.gifClick the Reset to Defaults button.

Note blank.gifIf the access point is configured with a static IP address, the IP address does not change.

8. blank.gifAfter the access point reboots, you must reconfigure it.

Aug 13, 2010 | Cisco Aironet 1131AG 802.11a, 802.11g/b...

2 Answers

I don't know how to reinstall the linksys access point!!! Our wireless network that we made simply disappeared, so I'm trying to re-make one. However, when I tried that with a flash drive, it couldn't work...


T
o access the Access Points Setup, and the LAN IP address has not changed, then computer must have an IP address of 192.168.1.XXX. If the Access Point is plugged in via Ethernet to a Linksys Router and the computer is also connected a Linksys router via Ethernet, then the PC should already have a correct IP address (unless the LAN IP Address of the Router has been changed). If unsure, please assign the computer a Static IP Address so it will have an IP address in the same range as the Access Points IP Address.

If the Access Point is being connected to a hub/switch/router via Ethernet, then use the cable that was provided with Access Point. If the Access Point is being connected to the computer directly, then a Cross Over cable must be used. Cross over cables can be purchased at most electronic stores.
    Remember: When ever a change is made in the Setup of the Access Point, the Apply button must be used to save the settings to the Access Point.
  1. Open a web browser (such as Internet Explorer or Netscape)
  2. When the browser opens, go to the "Address" bar and input the IP address of the Access Point.
      Default IP addresses:
    • WAP11 v2.8 - 192.168.1.251
    • WAP54G v1.1 - 192.168.1.245
  3. A "User Name" and "Password" prompt will appear, leave the "User Name" field blank and input the Access Points password (The default password of a Linksys Access Point is admin) into the "Password" field.

May 14, 2010 | Linksys Wireless-G WAP54G 802.11g/b...

1 Answer

Upon powering up 2100ap the power led in continuously blinking and i can not get ip address to open web page


1) Make sure that reset button blocked in "pressed" position, this can perfom a constant reset
2) Try to reset to default settings.
-Locate Reset button on the back of the device.
-Use a paper clip to press the Reset button.
-Hold for about 5 seconds and then release.
-After reboot the device it will reseted to default settings.



Jun 06, 2009 | D-Link AirPlus Xtreme G DWL-2000AP...

1 Answer

COMPUTER GOES TO COPYRIGHT PAGE NOT WINDOWS


Push F8 before the splash screen loads - start pushing it the moment you start your computer. You should get a screen that allows you to start in safe mode. Once you've started in safe mode, try rebooting and see if you computer comes up normally.

Apr 04, 2009 | Compaq Digital PC 3100 PC Desktop

1 Answer

Nextat C# GPS


GO BACK TO THE SETTINGS SCREEN AND RESET THE CROSS HAIR SCREEN. YOUR POINTING DEVICE IS OUT OF ALIGNMENT.

Dec 01, 2007 | Nextar Q3 GPS Receiver

Not finding what you are looking for?
Tomtom ONE GPS Receiver Logo

Related Topics:

275 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tomtom GPS Experts

LP

Level 3 Expert

514 Answers

k24674

Level 3 Expert

8081 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Are you a Tomtom GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...