Question about Akai PT4298HD Rear Projection Television

1 Answer

How do i reset my akai L842ADFD - Akai PT4298HD Rear Projection Television

Posted by on

  • dideedi Sep 10, 2011

    Thanks. I will follow instructions and hopefully this resets it.

    thanks

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 517 Answers

Good day!!

Here are the Instruction you can do to reset your tv.

  1. Check the power connections first to rule out any problems there. Unplug the power cord from television and the cable, if applicable. Wait 10 seconds, re-plug and press the "Power" button on the remote control or television control panel. If your television is not repaired, go to the next step.
  2. Reset the television. Press and hold down the "Power" button on the television control panel. Wait 10 seconds to reset the television. If your television is not repaired, go to the next step
  3. Reset the television to its factory default settings. Press the "Menu" button on the television control panel or remote control.
  4. Highlight "Installation," press "Enter" and open the "System Status" menu.
  5. Highlight "System Information" and press "Enter"
  6. Press the either "" arrow and then press "Factory Defaults" when it appears.
  7. Enter your four-digit "PIN code" or enter "0000" as your "PIN code" if you did not set it previously.
  8. Highlight the "Yes" option and then press "Enter." Wait until the television turns off -- about 10 seconds -- and then unplug the television power cord.
  9. Plug in the television power cord to complete the default factory setting process.
If the problem is still unsolved please add a comment.
Thank you for using fixya!!

Posted on Sep 10, 2011

  • Rossiel Gomez Sep 11, 2011

    You are very much welcome dideedi...
    Thank you too for the ratings just contact or add a comment if the problem is still unsolved.
    Have a Good day!!!!

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

MY AKAI TV HAS BEEN LOCKED WITH CHANNEL LOCK AND DON'T KNOW HOW TO UNLOCK IT. AND THERE IS LOGO OF M IN RIGHT SIDE CORER OF TELEVISION


Try restoring it to factory settings. I found these instructions and hopefully they'll help you to disable the channel lock problem you have -
How to Find the Reset Button on an Akai TV Techwalla com

Oct 01, 2018 | Akai Televison & Video

1 Answer

How do I reset my AKAI t.v.?


Go to:
· www.ehow.com/how_7465251_reset-button-akai-t...

Jan 02, 2013 | Akai Televison & Video

1 Answer

AKAI lct3285ta will turn on, show the akai logo and then turn off


Update the firmware. It is corrupted. Do a hard reset to this set, and then check. Sometimes it might help you. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/
Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.

May 21, 2017 | Akai LCT3285TA 32 in. LCD Television

1 Answer

The volume keeps resetting to 0 with out prompt on my Akai plasm


buy a new reciever, i recomend a vintage pioneer the SX1980 was the best ever made!

Jan 17, 2010 | Akai Televison & Video

1 Answer

How to factory reset akai ds8341 camera. I see garbled images on the 2.5 inch lcd monitor


Two ways... 1. Go into the camera menu and find "reset"...follow the on-screen instructions. 2.Remove the card and battery...press all the buttons...leave it alone for 20 minutes...insert the card and then the battery...turn it on.

Dec 23, 2009 | Akai DC6371 Digital Camera

1 Answer

Code remote akai pt46dl10


had same problem tried all kinds of universal remotes but none were compatible look online and found only logitech Harmony® 550 Advanced Universal Remote is compatible with this model akai pt46dl10 bought one now works fine and was able to reset my lamp timer with it as i just replaced it paid $65 on craigslist for remote good luck

Apr 26, 2009 | Akai PT46DL10 46" HDTV-Ready Television

1 Answer

Continuation of chat session


Hi again,

Appreciate the direct "Ask Me".

Got something for your. To reset the Akai LCT2701TD, pls try:
  • Press MENU button;
  • press < or > until "Misc" menu appears;
  • press UP or DOWN button to highlight "Default";
  • press ENTER button to confirm; unit will reset and be restored to factory defaults;
  • confirmation message will pop-up.
Looking forward to your update (or even the lack of it).

Nov 17, 2008 | Akai LCT2715 27 in. LCD Television

Not finding what you are looking for?
Akai PT4298HD Rear Projection Television Logo

Related Topics:

292 people viewed this question

Ask a Question

Usually answered in minutes!

Top Akai Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2337 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

The Knight
The Knight

Level 3 Expert

76125 Answers

Are you an Akai Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...