Question about Texas Instruments TI-Nspire Graphic Calculator

1 Answer

My student's ti nspire won't turn on. They have the 84 face plate on it.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,993 Answers

Hello,

Put in new batteries and try again.

If new batteries did not solve the problem, the next thing to check would be the battery terminal.

If the battery terminal is rusty, the battery power won't contact and the calculator won't turn on. So, use a flat small screw drive to scratch the battery terminal so that there would be contact.

If the above is not the problem, the next to check would be the wire connecting the battery terminal to the the calculator's main board. There is a wire between the battery terminal and the calculator board. When the battery is inserted, the power from the battery goes from the terminal to the board through this wire. There is a possibility that this wire is cut in-between or is loosing contact. In this case, you need to get a small screw driver and carefully disassemble the calculator in order to check the wire.

If the wire is intact, use a light brush to brush the calculator board as there might be dust on the board.

If non of the above helps, then it means the calculator is dead and needs a replacement.

Regards.

Posted on Sep 13, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i install the ti-84 operating system to the ti nspire


You do not. The TINspire with TI-84 keyboard works as a TI-84 Silver edition. Its OS is update when the TINspire OS is updated. The Ti 84 OS's you find on the TI website are not for the TINspire with TI84 keyboard.

May 12, 2014 | Texas Instruments TI-Nspire Graphic...

1 Answer

I am own a Ti-nspire and trying to download the latest Ti-84 silver plus os however when it begins to transfer to my calculator it says transfer error what can i do to fix this?


The standalone version of the OS for the TI84Plus/TI84Plus SE are not for TI-Nspire with TI84 keyboard. The 94 Plus part of the TI-Nspire is updated when you update the OS of the TI-Nspire. The version numbers are different.
To update you TI84 portion of the TI-Nspire, update the OS for the TI-Nspire. Thy are now at Version 3.2.3.1233

Sep 26, 2013 | Texas Instruments TI-Nspire Graphic...

1 Answer

Os transferring error


The standalone version of the OS for the TI84Plus/TI84Plus SE are not for TI-Nspire with TI84 keyboard. The 94 Plus part of the TI-Nspire is updated when you update the OS of the TI-Nspire. The version numbers are different.
To update you TI84 portion of the TI-Nspire, update the OS for the TI-Nspire. Thy are now at Version 3.2.3.1233

Sep 26, 2013 | Texas Instruments TI-84 Plus Silver...

1 Answer

When trying to divide two complex numbers in a+bi format, some of my students get the Data Type error message. I don't know why or how to help them. Can you help? Each complex number was enclosed in...


Here is screen capture of a similar calculation, performed on TI Nspire with TI 84 plus keyboard.To type in the imaginary unit use key sequence [2nd][dot], do not use [ALPHA][X^2] for the letter i.
k24674_90.jpg

Jun 08, 2011 | Texas Instruments TI-84 Plus Calculator

1 Answer

I am going to be getting a tinspire and I was wondering how you switch from ti-nspire mode to the ti-84 mode?


I am going to assume that you are buying the non-cas version as the Cas or computer algebra version of the nspire doesn't support the ti-nspire mode.

The tinspire will come with two key-boards. One will be the nspire keyboard, the other the ti-84 board. To switch between them there is a small toggle on the back of the calculator. Push the switch and the keyboard will pop out. Put the ti-84 keyboard in and then press the on button!

Cheers
Sine Wave

Apr 09, 2011 | Texas Instruments TI-Nspire Graphic...

1 Answer

I have issues turning on my TI-Nspire using TI-84 Plus SE keypad


i would say use the normal key pad or send it in to T.I to fix.

Mar 12, 2010 | Texas Instruments TI-Nspire Graphic...

1 Answer

TI-Nspire 84 Plus keypad problem


Remove the TI84 Keyboard, insert the TI-Nspire keyboard and try to reset the calculator with a starightened paper clip.Calculator has a reset button on the back.

Jan 23, 2010 | Texas Instruments TI-Nspire Graphic...

1 Answer

Ti 84 nspire,replaced batteries and now it says "operating system not found,install OS" Of course my son has a finals exam tomorrow..help!!


Hi
A. Download the TINspire OS from education.ti.com

Use the Ti-Nspire computer link to reload the OS onto the calculator.
  1. Remove the Ti84 keyboard and insert the Ti-Nspire keyboard.
  2. Make sure the battery are good.
  3. Connect the TI-Nspire device (with the Nspire keypad) to the computer using the USB Standard A to Mini B cable
  4. Run the Ti-Nspire computer link software.
  5. The select device dialog should appear, and detect the device.
  6. With the mouse cursor, select the OS, drag it and drop it on the main window (file browser window) of the TI-Nspire computer link software.
  7. Alternatively, click the menu Tools and select Install OS. A Select file window opens.Use the browse button to point to the OS and click Open/OK
B Installing from another Ti-Nspire ( not a TI-Nspire CAS) if availabe)
  1. Connect the two devices using the USB Mini A to Mini B cable
  2. The end marked A should be inserted into the sending unit, while the end marked B should be inserted into the receiving unit.
  3. Both units must be turned ON
  4. On the sending unit, access the document chooser by pressing [Home](the house icon).
  5. Once in the document chooser, press [Menu] and choose 9:Send OS…
Hope it helps.
Thank you for rating the solution.

Dec 11, 2009 | Texas Instruments TI-84 Plus Calculator

1 Answer

TI-nspire will not turn on


Yes we changed out the batteries on now the TI-84 will not turn on HELP

Nov 23, 2009 | Texas Instruments TI-Nspire Graphic...

1 Answer

TI 83 TI 84 and TI Nspire


Yes, the Ti nspire not only functions as a ti83 but, also operate w/ nice advance math software that any teacher would envey. It comes with the ti83 keypad plus software and great instructions to help the instructor at all levels of math learning. I don't know any better and it is a beautiful plan that ti has set up.

Apr 03, 2009 | Texas Instruments TI-84 Plus Calculator

Not finding what you are looking for?
Texas Instruments TI-Nspire Graphic Calculator Logo

1,081 people viewed this question

Ask a Question

Usually answered in minutes!

Top Texas Instruments Office Equipment & Supplies Experts

k24674

Level 3 Expert

8081 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Texas Instruments Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...