Question about Integra DTR-5.2 Receiver

1 Answer

My integra dtr-40.2 reciever will not turn off or change modes it is stuck on sat. volume works

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,098 Answers

Hi,

Please unplug the unit from the outlet for 15 mins and then check if the symptoms still there.
Reset the unit to factory setting by following the steps below.

> Power on the unit.
> Press VCR/DVR button key + On/standby key at the same time to re-initialized the memory to factory settings.


Check also if the remote control is working fine. Aim the sensor of the remote control directly to your cellphone camera, while pressing any button key from the remote control (button key with an issue) you will be able to see the flash of an infrared emitted by the remote control indicating that it is working fine. Watch the video below for more info.





Jdvillanueva

Posted on Sep 13, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I fix Cbt/sat no signal


The processor pcb board will need to be changed

Oct 09, 2014 | Integra Dtr-20.3 THX Select2 Plus AV...

1 Answer

"handshake" between DTR 5.9 and an LG Blu-ray player


You will have a defective processor pcb. You may want to see if you can get Integra to give you a one time repair on this.

Mar 26, 2014 | Integra Onkyo Rc-711m Dtr-4.9 / 5.9...

1 Answer

Integra DTR-5.6, no sound for am/fm tuner


reset receiver if that does not work You will have a defective processor pcb

Aug 24, 2013 | Integra DTR 5.6 Multi Media Amp

1 Answer

How do I set up an Integra DTR 7.8 for 3D display and audio


Your DTR-7.8 receiver is not 3D compatible. It does not support the new 1.4 HDMI. You have to have 1.4 HDMI and 1.4 cables for the 3D format.

You can bypass your receiver for the video though. Simply run your HDMI cord (1.4) from your Blue Ray to your Projector. Your audio can be ran from your Blue ray to your reciever.

May 17, 2012 | Integra Audio Players & Recorders

2 Answers

The reciver dosnt get a signal from the hdmi inputs both ps3 and blu ray have the same problem it is a dtr 5.9 integra


what you should do is make sure that your HDMI is cord is not in an awkard position, which like mine i have to unplug and plug back in to get a signal

Mar 01, 2010 | Integra DTR-5.1 Receiver

1 Answer

My left rear speaker has no sound. All others work. I have tested the speaker on a different reciever and it works fine. My reciever is a integra DTR 5.5


Swap your left and right rear speaker over. If you still get no sound from the right speaker connected to the left speaker connection on the receiver, then you have a fault on the receiver output. Check your manual first to see if any setting switch off the rear speaker before taking the unit for repair or replace

Nov 26, 2009 | Integra Audio Players & Recorders

1 Answer

No sound will come out the speakers until amp has sat on for half hour or so. After waiting, I have to flip through sound settings. Usually, the 'unplugged', or 'orchestra' setting will emit sound first....


check all speaker wires on the back and on the back of the speakers.if there is a short the amp will go in protect mode.
tap on it lightly and see if it comes on,there may be bad soldering on the pc board

Jul 18, 2009 | Integra DTR-7.1 Receiver

1 Answer

Low to no volume output from Integra DTR-5.2 receiver


most higher end integra's have a input level adjusment or input selection for each and every input. Perhaps you are not on the correct input, go to onscreen programming and check out the input level and input select - also try the tape in another input like tape 2 or cd. It will not hurt the receiver for a test. Also, if you are using the cheap cables from the manufacturer - try a pair of cables that you know work or go by some. BTW, you don't need to spend $40 for cables order them online through amazon or other store. Gold / sliver plated oxygen free are best.

Jun 30, 2009 | Integra DTR-5.2 Receiver

1 Answer

Volume control unstable


You may have an over heating problem as it the Integra has anautomatic cut out. The unit generates a huge amount of heat and needs to be positioned in a very well ventilated position.
Linian

Dec 11, 2007 | Integra DTR-5.1 Receiver

Not finding what you are looking for?
Integra DTR-5.2 Receiver Logo

Related Topics:

928 people viewed this question

Ask a Question

Usually answered in minutes!

Top Integra Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5699 Answers

The Knight
The Knight

Level 3 Expert

76140 Answers

Marvin
Marvin

Level 3 Expert

85178 Answers

Are you an Integra Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...