Question about Texas Instruments TI-83 Plus Calculator

1 Answer

I put in fresh batteries but the calculator won't turn on.

Posted by on

  • kakima Sep 13, 2011

    TI calculators have an annoying habit of dimming the screen when the batteries are changed so that it appears as if the calculator isn't turning on. Turn the calculator on (or at least press the ON key). Press and release the 2ND key. Press and hold the Up-arrow key for a few seconds and see whether the screen becomes legible. Does it?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,993 Answers

Hello,

If new batteries did not solve the problem, the next thing to check would be the battery terminal.

If the battery terminal is rusty, the battery power won't contact and the calculator won't turn on. So, use a flat small screw drive to scratch the battery terminal so that there would be contact.

If the above is not the problem, the next to check would be the wire connecting the battery terminal to the the calculator's main board. There is a wire between the battery terminal and the calculator board. When the battery is inserted, the power from the battery goes from the terminal to the board through this wire. There is a possibility that this wire is cut in-between or is loosing contact. In this case, you need to get a small screw driver and carefully disassemble the calculator in order to check the wire.

If the wire is intact, use a light brush to brush the calculator board as there might be dust on the board.

If non of the above helps, then it means the calculator is dead and needs a replacement.

Regards.

Posted on Sep 13, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

After a few months on not using my calculator, I put in fresh aaa batteries and a fresh 3v button battery. Still will not go on :(


TI calculators have an annoying habit of dimming the screen when the batteries are changed so that it appears as if the calculator isn't turning on. Turn the calculator on (or at least press the ON key). Press and release the 2ND key. Press and hold the Up-arrow key for a few seconds and see whether the screen becomes legible.

Aug 29, 2013 | Texas Instruments TI-82 Calculator

1 Answer

Camera won t turn on


What model Vivitar camera? What type(s) of batteries?

Jun 20, 2013 | Vivitar Cameras

2 Answers

My calculator won't turn on the batteries are fresh plz help


TI calculators have an annoying habit of dimming the screen when the batteries are changed so that it appears as if the calculator isn't turning on. Turn the calculator on (or at least press the ON key). Press and release the 2ND key. Press and hold the Up-arrow key for a few seconds and see whether the screen becomes legible. Does it?

Feb 13, 2013 | Office Equipment & Supplies

1 Answer

Batteries won't work


TI calculators have an annoying habit of dimming the screen when the batteries are changed so that it appears as if the calculator isn't turning on. Turn the calculator on (or at least press the ON key). Press and release the 2ND key. Press and hold the Up-arrow key for a few seconds and see whether the screen becomes legible.

Aug 31, 2012 | Texas Instruments TI-83 Plus Calculator

1 Answer

My calculator just shut off while i was using it, i replaced the triple A batteries but now it still won't turn on, how can i fix it?


TI calculators have an annoying habit of dimming the screen when the batteries are changed so that it appears as if the calculator isn't turning on. Turn the calculator on (or at least press the ON key). Press and hold the 2ND key. Press and hold the + key for a few seconds and see whether the screen becomes legible.
If this doesn't do it, please reply to this post and we'll go on from there.

Mar 15, 2012 | Texas Instruments TI-89 Calculator

1 Answer

Won;t power up at all. New batteries but I did not replace back up battery. should I? Tried the contrast fix. Son said he dropped it and it got kicked down hall at school. One year old. Any hope?


Hello,

If new batteries did not solve the problem, the next thing to check would be the battery terminal.

If the battery terminal is rusty, the battery power won't contact and the calculator won't turn on. So, use a flat small screw drive to scratch the battery terminal so that there would be contact.

If the above is not the problem, the next to check would be the wire connecting the battery terminal to the the calculator's main board. There is a wire between the battery terminal and the calculator board. When the battery is inserted, the power from the battery goes from the terminal to the board through this wire. There is a possibility that this wire is cut in-between or is loosing contact. In this case, you need to get a small screw driver and carefully disassemble the calculator in order to check the wire.

If the wire is intact, use a light brush to brush the calculator board as there might be dust on the board.

If non of the above helps, then it means the calculator is dead and needs a replacement.

Regards.

Sep 13, 2011 | Texas Instruments TI-84 Plus Calculator

1 Answer

No display at all, does not seem to be turning on, yes I replaced the batteries.....any thoughts?


Hello,

If new batteries did not solve the problem, the next thing to check would be the battery terminal.

If the battery terminal is rusty, the battery power won't contact and the calculator won't turn on. So, use a flat small screw drive to scratch the battery terminal so that there would be contact.

If the above is not the problem, the next to check would be the wire connecting the battery terminal to the the calculator's main board. There is a wire between the battery terminal and the calculator board. When the battery is inserted, the power from the battery goes from the terminal to the board through this wire. There is a possibility that this wire is cut in-between or is loosing contact. In this case, you need to get a small screw driver and carefully disassemble the calculator in order to check the wire.

If the wire is intact, use a light brush to brush the calculator board as there might be dust on the board.

If non of the above helps, then it means the calculator is dead and needs a replacement.

Regards.

Sep 12, 2011 | Texas Instruments TI-83 Plus Calculator

1 Answer

My student's ti nspire won't turn on. They have the 84 face plate on it.


Hello,

Put in new batteries and try again.

If new batteries did not solve the problem, the next thing to check would be the battery terminal.

If the battery terminal is rusty, the battery power won't contact and the calculator won't turn on. So, use a flat small screw drive to scratch the battery terminal so that there would be contact.

If the above is not the problem, the next to check would be the wire connecting the battery terminal to the the calculator's main board. There is a wire between the battery terminal and the calculator board. When the battery is inserted, the power from the battery goes from the terminal to the board through this wire. There is a possibility that this wire is cut in-between or is loosing contact. In this case, you need to get a small screw driver and carefully disassemble the calculator in order to check the wire.

If the wire is intact, use a light brush to brush the calculator board as there might be dust on the board.

If non of the above helps, then it means the calculator is dead and needs a replacement.

Regards.

Sep 12, 2011 | Texas Instruments TI-Nspire Graphic...

1 Answer

My TI83 won't turn on. I just put in new batteries


Having gone over a month without a response to my query, I assume my suggestion to change the screen contrast solved the problem.

Sep 01, 2011 | Texas Instruments TI-83 Plus Calculator

1 Answer

It's "frozen". won't change from the screen its


Try to reset it by taking out the batteries and leaving to sit for a minute or so, if that doesn't work take out the small battery as well and leave it sit, if you're still stuck you can call ti-cares (800-842-2737) they're generally very helpful.

Aug 05, 2011 | Texas Instruments TI89 Titanium Scientific...

Not finding what you are looking for?
Texas Instruments TI-83 Plus Calculator Logo

Related Topics:

497 people viewed this question

Ask a Question

Usually answered in minutes!

Top Texas Instruments Office Equipment & Supplies Experts

k24674

Level 3 Expert

8081 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Texas Instruments Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...