Question about Texas Instruments TI-84 Plus Calculator

Ad

When you do your regression (stat --> calc --> linReg/QuadReg/whichever regression you're doing)) make sure you put the equation into Y1 before going to the table.

Posted on Sep 17, 2011

Ad

Hi there,

Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

You cannot have a scatter plot with just **one variable.** You need values in L1 and values in L2. If you have only one set of values you can do **1-var statistics** and plot a histogram (x-value vs. frequency).

Oct 06, 2013 | Texas Instruments TI-84 Plus Silver...

Your TI-84 Plus displays the ERR:DIM MISMATCH error if you are trying to perform an operation that references one or more lists or matrices whose dimensions do not match.

For example, multiplying L1*L2, where L1={1,2,3,4,5} and L2={1,2} produces an**ERR:DIM MISMATCH** error because the number of elements in L1 and L2 do not match

For example, multiplying L1*L2, where L1={1,2,3,4,5} and L2={1,2} produces an

Nov 29, 2012 | Texas Instruments TI-84 Plus Silver...

The TI-84 does not have a built-in quintic fit.

The most common scheme for fitting a model to data is the least squares. You'll find several programs to calculate this here.

The most common scheme for fitting a model to data is the least squares. You'll find several programs to calculate this here.

May 24, 2012 | Texas Instruments TI-84 Plus Calculator

After you enter the data draw the SCATTER plot first.

When you perform the (linear) regression analysis LineReg, save the regression equation to a function, for example Y1

The syntax is

LineReg L1, L2, Y1 ENTER

From the Stat>CALC menu press LineReg

The command echoes on command line

Press [2nd][1] to enter the L1 list on command line

Press [,] to separate

Press [2nd] [2] to enter L2 on the command line

Press [,] the comma again

Press [VARS][>][Y-Vars][1~Function][1:Y1] [ENTER]

Press [GRAPH] to have the regression line equation drawn

on the same screen as the Scatter Plot you drew before.

When you perform the (linear) regression analysis LineReg, save the regression equation to a function, for example Y1

The syntax is

LineReg L1, L2, Y1 ENTER

From the Stat>CALC menu press LineReg

The command echoes on command line

Press [2nd][1] to enter the L1 list on command line

Press [,] to separate

Press [2nd] [2] to enter L2 on the command line

Press [,] the comma again

Press [VARS][>][Y-Vars][1~Function][1:Y1] [ENTER]

Press [GRAPH] to have the regression line equation drawn

on the same screen as the Scatter Plot you drew before.

Sep 13, 2011 | Texas Instruments TI-84 Plus Calculator

Your assumption

--Next, I should be able to press VARS, move to Y-VARS, select FUNCTION, then select Y-1 and automatically enter the equation into Y-1.-

is not correct.

When you press [STAT[>][CALC][4:LinReg(ax+b)] or any other regression model,the command echoes on the main screen. If you press [ENTER] at this point, the calculator uses by default lists L1 and L2 and displays the resulting equation without copying it in a Y-variable.

If you want to have the equation copied on a Y-function, you should modify the command as follows

LineReg(ax+b) [SHIFT][1: L1] [,] SHIFT[2:L2] [,] [VARS][>:Y-Vars] [1:Function][1:Y-1][ENTER].

Here, [>] stands for RightArrow. For any other regression model, use the appropriate command.

At this point, the command line should look like the following:

LinReg(ax+b) L1, L2, Y1

Press [ENTER] to calculate you get the same screen as when you do not save the equation in Y1, but if you go to the Y= editor or press GRAPH, you will see the regression line superposed on the scatter plot.

--Next, I should be able to press VARS, move to Y-VARS, select FUNCTION, then select Y-1 and automatically enter the equation into Y-1.-

is not correct.

When you press [STAT[>][CALC][4:LinReg(ax+b)] or any other regression model,the command echoes on the main screen. If you press [ENTER] at this point, the calculator uses by default lists L1 and L2 and displays the resulting equation without copying it in a Y-variable.

If you want to have the equation copied on a Y-function, you should modify the command as follows

LineReg(ax+b) [SHIFT][1: L1] [,] SHIFT[2:L2] [,] [VARS][>:Y-Vars] [1:Function][1:Y-1][ENTER].

Here, [>] stands for RightArrow. For any other regression model, use the appropriate command.

At this point, the command line should look like the following:

LinReg(ax+b) L1, L2, Y1

Press [ENTER] to calculate you get the same screen as when you do not save the equation in Y1, but if you go to the Y= editor or press GRAPH, you will see the regression line superposed on the scatter plot.

Jul 13, 2011 | Texas Instruments TI-84 Plus Calculator

Instead of hitting the [table] button. You should hit the [stat] or
[stats] button as I forget which it is. Then hit [enter] which will
bring you to a stats list editor of some kind. You will want to enter
the data for your x-axis in L1 and the data for your y-axis in L2. Once
you have completed your lists, hit the [stat] button again and then
click [right] or the right arrow in order to move to the section of
calc. from number 4 down it will help create a graph of that type of
function. lets say you think it is linear, so you hit [enter] on number
4 and then you will be at the home screen with LinReg already written.
You just have to complete the statement and it will do it for you. hit
the [2nd] [1] and then the comma button, then [2nd] [2] and [enter].
that will do it for you.

Feb 14, 2011 | Texas Instruments TI-84 Plus Silver...

click the STAT key, then edit (first option). enter X points in L1 and Y points in L2 so that the number matches up with the number across from it, making coordinates. so if the points were (1,2) , (3,4) , and (5,6), the 1,3, and 5 are in L1 and 2,4, and 6 are in L2 in that order. click 2ND, STATPLOT and hit enter to chose the settings (so make sure ON is highlighted). this is where you can change which list X or Y uses (so X doesnt have to be L1). lastly, make sure that the WINDOW settings are matching your data (Xmin is smallest X, Xmax is largest X, X scale is when the hash-marks should apear on the graph (to turn them on go to 2ND, FORMAT) and when you hit the GRAPH key, your graph should apear. also, to make your window a different size easily, use the ZOOM key near the GRAPH key.

Jan 25, 2011 | Texas Instruments TI-84 Plus Calculator

The table is where the calculator displays values from functions entered in the Y= page. To enter numbers into lists, press STAT and select Edit to get into the list editor.

Dec 21, 2010 | Texas Instruments TI-84 Plus Calculator

Even if you do not have L1 you can still graph: You have 6 lists to put data in. You are not required to use L1 but you will have to specify the lists. Be it as it may you can restore L1, which in all likelihood you deleted.

Press the [STAT] key and select [4:SetUpEditor] then press [ENTER]

Press the [STAT] key and select [4:SetUpEditor] then press [ENTER]

Sep 11, 2010 | Texas Instruments TI-84 Plus Calculator

Press STAT, go to Edit, then enter x values in L1 and y values in L2 (other lists can be used too, but these are the default ones).

Next, go to STAT PLOT, pick a plot, turn it on, select the type, data lists (x and y should be L! and L2 already; if not, change them), and mark type.

Finally, hit graph. You may need to adjust window settings to see all of the points. If you get a DIM MISMATCH error, check to make sure that there are the same number of entries in each list, and that only the plots that you are using are turned on.

Next, go to STAT PLOT, pick a plot, turn it on, select the type, data lists (x and y should be L! and L2 already; if not, change them), and mark type.

Finally, hit graph. You may need to adjust window settings to see all of the points. If you get a DIM MISMATCH error, check to make sure that there are the same number of entries in each list, and that only the plots that you are using are turned on.

Oct 25, 2007 | Texas Instruments TI-84 Plus Calculator

137 people viewed this question

Usually answered in minutes!

×