Question about Connex 3300 240-Channels Base CB Radio

1 Answer

I need a wiring digram for a rk 56 inside the mike my wires are broke need to know were to put them back connex 3300hp

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,018 Answers


  • With the switch sitting as it is in the picture below (actual switch recessed tho the right. Soldier the wires in this order.


  1. Black
  2. Red
  3. Lite Blue.
  4. Dark Yellow (This yellow wire comes from the mic cord itself)
  5. Shield.
  6. Lite Yellow. (This yellow wire runs off to the side of the mike to the electrical components inside the mic)

I need a wiring digram for a rk 56 inside the mike - ironfist109_297.jpg


  • Standard 4 pin Cobra mic tip to run it to that Connex.

  • Pin 1 - Shield.
  • Pin 2 - White.
  • Pin 3 - Red.
  • Pin 4 - Black.

  • If you have any comments please feel free to leave them here.
  • Hope this helps and thank you for using FixYa.


Regards, Tony

Posted on Oct 06, 2011

  • 2 more comments 
  • Iron
    Iron Oct 06, 2011

    Also between the two yellows should be the Black wire for the switch.

    Regards,
    Tony

  • Iron
    Iron Oct 06, 2011

    Never mind the comment about the black wire. Sorry for the confusion. The way I originally typed it is correct.

  • Eric Dove Oct 07, 2011

    Thanx man!

  • Iron
    Iron Oct 07, 2011

    Your welcome. Glad to help. Thanks again for using FixYa. Come see me if you get other CB questions.

    Regards,
    Tony

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need a wiring setup for an rk-56 to a rci6900 any help please?


Pin #1 Red ,Shield (ground)
#2 White (audio)
#3 blue (transmit)
#4 Black (receave)

Sep 29, 2014 | Radio Communications

1 Answer

Hooked up my connex 3300hp backwards


this usually just blows the fuse, check/replace and try again, if it pops the fuse, the protection diode has shorted and the radio needs to be serviced

Feb 08, 2014 | Connex Radio Communications

2 Answers

Mic plug wiring diagram for connex 3300


Stock
1- Shield (Ground)
2- Yellow (Audio)
3- Red (Transmit)
4- White (Receive)
This is the stock mic wiring but why bother just order a RoadKing 56 it is already wired for your radio. I suggest Copper.com dont even consider a Skythumper it is cheaper but the quality is not there.

Nov 12, 2011 | Radio Communications

1 Answer

Got a connex 3300HP has a ranger board and chipset won't modulate recieves fine keys up relay clicks needle doesn't move no voice either cant find schematics


You may have a dead meter.
Modulation is audio's affect on swing wattage or pep. Notice that needle moving more with your voice.
Dead key or carrier wattage is without your voice enhancing the power only with mic keyed.
I can only assume that the chipset you are referring to is an ic chip audio or pll which must be working if you are receiving audio.
Check your mic cord................ transmit and modulation and even your receive volume can be affected by the cord/mic plug solder joints or broken wires here.
http://www.cbtricks.com/radios/galaxy/dx33hp2/graphics/dx_33hp2_sch.pdf this is a similar radio the General Lee, Connex 3300hp and Galaxy hp2 share boards i believe dont hold me to that thou.


Aug 20, 2011 | Connex 3300 240-Channels Base CB Radio

1 Answer

Can i send my ranger 2950 to ranger to get fixed?


there is a store in Heidenheimer, TX they do repairs. you can do a google search for cb shop temple, tx... its the one on hwy 95 & Fm 93, whatever you do, don't goto exit 306 shop they will over charge by 90% markup.... the one on hwy 95 in temple,tx will have the best prices in the state. guaranteed they are open from 5pm till evening not sure when they close. Mon-Fri. and call them for saturdays and sunday hours.

they have connex 3300hp w/blue led for $198+tax
rk 56 mics $39.99+tax
astatic 636L $19.95 + tax
wilson 1000mag ant $74.99+tax
these are the every day prices that i have seen while in there

Dec 03, 2010 | Ranger Radio Communications

1 Answer

How can i disconnect the talk back on a connex 3300 plus? pleasa be specific on directions. thanks


in older connex 3300's you cannot disable the talk back. Its part of the audio chain. If you disable the talk back you will loose your audio. There are 2 things you can do.

Hook a relay to the speaker so that when the radio key's id disconnects the speaker. (Big pain, not worth the trouble.)

The other will not disable the talk back but it will stop any squealing.

Use a noise canceling mic. An RK-56 will work great. You will get no squealing with that mic.

Oct 19, 2010 | Connex 3300 240-Channels Base CB Radio

1 Answer

Turner Rk 56 mic


Here is the wiring information for a Turner RK56. If the picture is too samll for you too see or it does not load up, email me at rollincbmods@yahoo.com with the subject as RK56 wiring diagram needed, and I will email it to you.

Dean Pitts
Rollin CBs

b306d22.jpg

May 30, 2009 | Magnum DeltaForce CB Radio

4 Answers

Connex 4600 Turbo


i have the same radio turn talk back off and there is enough power ull have talk back through you trucks radio speakers and it needs to be hooked up to the battery with at least 12ga wire

Feb 10, 2009 | Connex 4600 Base CB Radio

1 Answer

Manual for Connex 3300 HP


The best place for anything related to cb radios and ham radios is www.cbtricks.com.

Here is a direct link to the owner's manual for a Connex 3300hp

http://www.cbtricks.com/radios/connex/cx_3300_cx_3300hp/graphics/connex_cx3300_cx3300hp_om.pdf


Dean Pitts
Rollin CBs

Aug 26, 2008 | Connex 3300 240-Channels Base CB Radio

Not finding what you are looking for?
Connex 3300 240-Channels Base CB Radio Logo

614 people viewed this question

Ask a Question

Usually answered in minutes!

Top Connex Radio Communications Experts

Chris

Level 2 Expert

197 Answers

Damon Nesselrodt
Damon Nesselrodt

Level 2 Expert

197 Answers

Ray Murphy

Level 2 Expert

68 Answers

Are you a Connex Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...