Question about Hotpoint RFA60 Bottom Freezer Refrigerator

Open Question

Althoughi put my settings on number 1 or 2 aboute 7 or 8 weeks it realy thick of ice.and i have to keep on thawing it out.RFA60.FUTURE

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: hotpoint future RFA60 Fidge Freezer

I have lost the instruction booklet for my Fridge Freezer RFA60. How do I defrost the freezer? 

Posted on Nov 08, 2008

Ad
EllaWatson25
  • 725 Answers

SOURCE: Ice-maker thawing-refreezing into block of ice

Your defrost system may be out on this unit.

Posted on Aug 14, 2009

  • 973 Answers

SOURCE: Ice build up on coils in freezer GE Profile PS123NC/psI23SC

You may need to replace the automatic defrost sensor.

Posted on Jun 05, 2010

machinetech7
  • 1344 Answers

SOURCE: recently noticed ice accumulation in

You have a clogged drain. Usually I remove the ice, take a screwdriver and tap it into the drain hole. Then I pour hot water down it until I see that the water is draining all the way out.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/jason_4570d45317834dd3

Posted on Oct 31, 2010

  • 246 Answers

SOURCE: I need a new door for the freezer section of my RFA60. Where can I get one?

Instead of replacing the door--- just cover it instead.
Go to www.applianceart.com -- These guys specialize in refacing your appliances. Their motto is Don't replace your existing working appliances -- Reface them. They offer magnetic and vinyl options that will fit over the existing surface. I believe the vinyl option will work best for you.
They have solid colors, designs, textures and even stainless steel options.
Worth checking out.

Posted on Dec 09, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

For the past couple of weeks, the freezer will loose its cool enough to thaw or partially thaw what is in it, but two or three hours later it will be frozen again. Keeps going back and forth. Ideas?


possible problem thermostat or freezer setting to close to one setting
reset to a bigger number as the numbers work opposite to the fridge settings ( 1 is close to 0 degrees and 20 is -20 degrees ) where as in a fridge 1 is close to 0 degrees and 5 is + 5 degrees above 0

Sep 10, 2016 | Refrigerators

1 Answer

Ice dispensor not working


Most likely reason water not dispensing out door 1) You can turn up the temp in the freezer to see if it thaws in a couple of days, 2) Turn on the dispenser light and leave it on, will thaw the line and keep it thawed, 3) the water tank is frozen in the fresh food side (you can defrost with a blow drier) 6) the fill valve went bad or plugged ( power to fill valve but not opening) ($50) 7) Micro switch went bad in the dispenser for the water side 8) Door switch bad 9) Install a heater kit to thaw the line and it will keep it thawed ($35) PN#1381601 10) You can replace the whole door if insulation gone bad in door ( $500 to $800) 11) a broken wire to the fill valve ( no power to fill valve ) 12) with GE refrigerator bad dispenser boards or control boards ($400 and $150) 13) plugged, faulty or incorrectly installed water filter let me know more about you problem and I can help..

Sep 26, 2009 | GE Profile PSW26P Stainless Steel Side by...

1 Answer

My Samsung RS267LBBP side by side has low water preasure at the dispensor after only three weeks after changing the filter. I've changed it three times with the same result. Also, I've noticed the ice...


with samsung refers the control board and ice maker have be updated Most likely reason water not dispensing out door 1) You can turn up the temp in the freezer to see if it thaws in a couple of days, 2) Turn on the dispenser light and leave it on, will thaw the line and keep it thawed, 3) the water tank is frozen in the fresh food side (you can defrost with a blow drier) 6) the fill valve went bad or plugged ( power to fill valve but not opening) ($50) 7) Micro switch went bad in the dispenser for the water side 8) Door switch bad 9) Install a heater kit to thaw the line and it will keep it thawed ($35) PN#1381601 10) You can replace the whole door if insulation gone bad in door ( $500 to $800) 11) a broken wire to the fill valve ( no power to fill valve ) 12) with GE refrigerator bad dispenser boards or control boards ($400 and $150) 13) plugged, faulty or incorrectly installed water filter let me know more about you problem and I can help..

Sep 26, 2009 | Samsung RS267LBBP 26.1 Cu. Ft. Side by...

1 Answer

Ice-maker thawing-refreezing into block of ice


Your defrost system may be out on this unit.

Aug 13, 2009 | Refrigerators

1 Answer

Freezer keeps thawing. There was an ice build up.


Check the "flap" in the door where the ice is released. If it has come undone it will thaw the ice in the maker and into the freezer...

Jul 10, 2009 | Whirlpool 25.6 cu. ft. Side-by-Side...

1 Answer

Wall ac unit keeps freezing up inside.


Do not run it on maximum cool and fan on low. Freezes up all the time this way.

May 01, 2009 | Heating & Cooling

2 Answers

Fan in freezer very loud noise


There is probably an ice build up behind the plastic rear panel. The ice build up gets so thick that eventually, it obstructs the fan and then you get that loud noise as the tips of the fan are chipping away at the ice.
What you need to do is to remove the rear panel and thaw the ice build up. To remove the rear panel is usually only 2 screws at the bottom.....you will find that the panel is difficult to remove due to ice build up behind it, so gentle heat from a hairdryer is a good way to accelerate the thawing process....once the panel is removed, you will see the ice build up......mine was about 2 inches thick!!!
I used the hairdryer to thaw it all out and then once cleared, switched it back on and have never had a problem since.
By the way, my F?F is a Beko CDA563FS......the one with the water dispenser on the front and frost free.
Hope this helps

Feb 01, 2009 | Freezers

1 Answer

Whirlpool side by side, 7 years old. not making ice


try using a hair dryer to thaw out the trough and remove the ice. please note the ice will run all the way up into the tube where it comes thru the cabinet.
this may have occured from your recent filter change as a new filter introdues alot of air into the water system and will cause these tubes to freeze up. in the future right after you replace your filter be sure to run aout 1/2 to 1 gallon of water thru water dispenser to clear air out of system. thx peyton

Jan 27, 2009 | Whirlpool 25.6 cu. ft. Side-by-Side...

2 Answers

Hotpoint future RFA60 Fidge Freezer


I have lost the instruction booklet for my Fridge Freezer RFA60. How do I defrost the freezer? 

Nov 04, 2007 | Hotpoint FFA60 Bottom Freezer Refrigerator

Not finding what you are looking for?
Hotpoint RFA60 Bottom Freezer Refrigerator Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Refrigerators Experts

jasbo
jasbo

Level 3 Expert

2239 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

jdthefixer

Level 3 Expert

746 Answers

Are you a Hotpoint Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...