Question about Uniden DECT 6.0 Cordless Telephone Expansion Handset

Open Question

I just purchased a uniden DECT1580-5A. I charged the base and phone 24 hours as the directions state. The base says E1 as soon as power is sent to it. The other 5 hand sets say searching. Please h I see how to rest phones but how do you reset the base. I unplug it base and plug it back up and still error code E1

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No reception


Sounds like the radio in your base phone has quit working. Yes, you can buy another base but it has to be the same model s your existing one. After you get the new base follow the instruction in your users manual to unregister the old handset and then reregister them to the new base. Link to users manual
http://www.uniden.com/content/ebiz/uniden/resources/ownersmanuals/D1760om.pdf

Jan 29, 2014 | Uniden Cordless Phone

1 Answer

I have a Uniden D1680 cordelss phone system. Often times when talking for two minutes or so--it disconnects--this happens alot. Any suggestions???


UNIDEN is notorius for this. It could be losing connection to the base - are you moving around while on the phone? or it could be the battery is not holding a sufficient charge. You can move the base unit to see if that helps - maybe something is interfering with the signal. You can try taking the battery out of the phone and putting it back in. If that doesn't work then try swapping the phones and putting them in each others charger. If that doesn't work then try letting the battery die by leaving the phone off the charger for 24 hours and then recharging for 24 hours. Good Luck!

Jun 10, 2012 | Uniden Cordless Phone

1 Answer

Base seems ok but cannot get display on handpiece. LED shows that it is charging & has been for many hours.


uniden will sometimes take 24 hours to charge to work....if the display never works, then it is the phone...take it back.

Jun 12, 2010 | Uniden Cordless Phone

1 Answer

New out of the box and main base wont power on when plugged in - how come?


Hello. You have to plug in your base for at least 24 hours to charge the batteries. Regards, Joe
PS - kindly rate my answer as helpful. thank you.

Feb 14, 2010 | Uniden Cordless Phone

1 Answer

Searching for base and battery loses power too soon


Have the batteries been changed since the system was purchased... 4 years is a fairly good usage for batteries in that type of use.
Good news you should have no trouble buying replacement batteries... even walmart has them. Open the back of one of the phones... the battery has a small plug.. pull that out and you will see the part number... about 25 dollars each battery pack... cheaper if you are in the states.
One note tho... when you replace the battery pack you need to charge it for at least 12 hours prior to the first usage 24 hours even better.

Robert

Dec 19, 2008 | Vtech 5.8GHz Cordless Phone with Digital...

1 Answer

E1 displays on base unit uniden wdect 3355


THATS AN ERROR MESSAGE, BASE IS NOT GOING TO WORK ITS SHOT.

Oct 27, 2008 | Uniden 2.4 GHz Cordless Phone System

2 Answers

GE cordless 900 mHz


I cannot receive my messages...help please

Mar 08, 2008 | Uniden Cordless Phone

1 Answer

Please register


I charged my three brand new GE model 25922 for 24 hours, placed each handset in the main base to satisfy the "PLEASE REGISTER" message and the message remains. The only instruction in the manual as well as on the 800 448-0329 # is to place each handset in the base unit for 20 seconds.

Dec 03, 2007 | Uniden Cordless Phone

1 Answer

Uniden DSS7955 Cordless phone problems


I had the same problem!

What you need to do is hold the "end" and "#" key for 5 sec, which will deregister the headset then all you would have to do is place it back in the base for it to registered again.

Nov 25, 2007 | Uniden Lands Phones

1 Answer

Base phone handset #1 holding charge


The base unit should not need a charge. It should be powered by the plug in adapter. It may have a battery to keep operation for a short time in a power outage. The adapter may be loose, the adapter could be broken or the plug in the phone may be broken.

Jun 19, 2007 | Uniden TRU9480 Cordless Phone

Not finding what you are looking for?
Uniden DECT 6.0 Cordless Telephone Expansion Handset Logo

Related Topics:

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Lands Phones Experts

k24674

Level 3 Expert

8081 Answers

Cindy Wells

Level 3 Expert

6026 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Are you an Uniden Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...