Question about KitchenAid KUDS30IXSS Builtin Dishwasher

1 Answer

Kuds30ix kitchenaid dishwasher has no lights on the control panel

Kitchenaid kuds30Ixss dishwasher will not function at all. no lights on control panel. shutting off power overnight and then turning it on did not reset the unit. there is power to the dishwasher. when I removed the control panel to check the thermal fuse that is usually there, there was no thermal fuse at that location. Any guesses as to what is wrong or where the thermal fuse is located would be appreciated.

Posted by Anonymous on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Welcome Back:

    Visited the website for 2 consecutive days.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 20 Answers

Its inside the control board itself, its snapped into it with little tabs holding it. ....it's round, and has two wires on it. About the size of a nickel.

item #3 on this pic

kuds30ix kitchenaid dishwasher  has no lights on t - 29126621_2_0_2-lfe15f1rr0k5ixwtvzhpdfvn-5-0.gif

Posted on Jan 10, 2019

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 12 Answers

SOURCE: dishwasher conrol panel light comes on but it wont go into wash cycle

All dishwashers usually start by draining first, if your machine does not detect that your machine is empty it will not start to wash. There are a few resons why this can happen, could be the pressure switch is stuck. Some machines ie bosch have a float switch mounted in the base so if your machine has leaked underneath and lifted the switch it will just stay on drain.... would help to know the make and model number

Posted on Jun 15, 2008

  • 1894 Answers

SOURCE: Kitchenaid Dishwasher thermal fuse keeps blowing

if your fuse is blowing often i would suggest you to move your washer to a different place and try a different plug point.

there may be some fault with your power.

try to sort it out step by step.

thank you

Posted on Sep 17, 2008

  • 37 Answers

SOURCE: kitchenaid dishwasher, control panel is not

I don't know your technical ability, but there is a fuse located next to the control board inside the console, this is a good place to start. Kitchen Aid is good about putting tech sheets on the back of the kickplate and it should have wiring and diagnostic info there. Just be sure to put the sheets back so the next service tech to work on it will have them :)

Posted on Sep 01, 2009

  • 56 Answers

SOURCE: my dishwasher has no power not even on the touch

Several possible problems: 1. door switch failed. Expose it and test 2. Neutral connection loose at junction box under dishwasher. Expose and test. 3. Control board or Touch pad failure. Expensive to replace.

Posted on Sep 19, 2009

  • 6 Answers

SOURCE: Dishwasher KUDC25CH; Control Panel is not working

WASH THE DISHES URESELF U LAZY ****!!! :)

Posted on Oct 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Run a service test for kitchenaid dishwasher


Did you check behind the toe-kick panel for the tech data sheet? Assuming that you have checked and that it is missing, there here is the "secret keystrokes" that will make most Whirlpool/ KitchenAid/Kenmore/Maytag diswashers enter the diagnostic cycle:
Heated Dry - Normal - Heated Dry - Normal; or
High Temp - Air Dry - High Temp - Air Dry; or
Hi Temp Scrub, Energy Saver Dry, Hi Temp Scrub, Energy Saver Dry; or
High Temp Wash, Heated Dry, High Temp Wash, Heated Dry.

Note: On some of the newer Whirlpool, Kenmore, KitchenAid dishwashers, you start the diagnostic cycle by rapidly pressing the 3 left-most keys in the following sequence: 1 2 3, 1 2 3, 1 2 3.

If you need further help, reach me via phone at https://www.6ya.com/expert/ronald_e6b9572cebe3ad27

Oct 18, 2014 | KitchenAid KUDS30IXSS Builtin Dishwasher

1 Answer

Dishwasher will not turn on and control light blinking


The command and control center may be damaged from a power surge or misuse. You need a new Powerboard.

May 09, 2014 | KitchenAid KUDS30IXSS Builtin Dishwasher

1 Answer

Upper rack track wheel broke


You can try to obtain the part from KitchenAid or an appliance parts supplier. However, you may only be able to get the complete assembly.

Nov 07, 2013 | KitchenAid KUDS30IX Dishwasher

1 Answer

Upper rack falls out each time we pull it to fill or empty. The wheels on the rack seem to be detaching


Can you find a new basket or just the wheels. I would try Google or ebay or this site sell spares I think

Sep 20, 2013 | KitchenAid KUDS30IX Dishwasher

1 Answer

Needto reset system


turn off the circuit breaker connected to the dishwasher then on again

Feb 05, 2013 | KitchenAid KUDS30IXSS Builtin Dishwasher

1 Answer

Model KUDS30FXSS1 Kitchenaid dishwasher control panel stopped working at the end of a cycle.


I had a similar problem: unresponsive buttons, then the 1 hour wash button led was on but the other buttons weren't working at all.
I power off for more than 30 seconds and after that everything return to normal.
Thank you for the hint!

Nov 03, 2012 | KitchenAid Dishwashers

1 Answer

Kitchenaid diswasher replaced control panel and dishwasher is not working again


Check the door switch, it could be a loose wire or broken door latch switch.

Feb 29, 2012 | KitchenAid KUDS01DJ - Multiple Color...

1 Answer

Dishwasher leaves water on dishes and in dishwasher after the heat dry cycle is finished. What should I do?


Hi,
Check your heating element..
A bad heating element causes many problems in dishwashers...

Dishwasher Problems The Heating Element not Working
How to Replace the Dishwasher Heating Element
Dishwasher Maintenance

heatman101

Asker's Testimonial " explanation very clear. will give it a go and seehow simple it was. thanks Ronnie " - ronnieshomes

Aug 26, 2011 | KitchenAid KUDS30IXSS Builtin Dishwasher

1 Answer

I have a Kitchenaid dishwasher model#KUDS01J, Icann't get it to start the rinse only cycle is stuck with a light blinkin and we cann't press any other functions on the panel.


I suggest having a qualified service tech diagnose your situation. The most likely issue would be a shorted touchpad. However, a failed control board could give you the same scenario. Both parts are expensive, so you would want to know which is failed prior to changing a part.

Nov 04, 2009 | KitchenAid 24 in. KUDS01FLBL Built-in...

2 Answers

KitchenAid kuds24se dishwasher DOA


We had same problem - took dishwasher out from counter and found it to be unplugged way way in the back 1

Sep 21, 2007 | KitchenAid KUDS24SE Built-in Dishwasher

Not finding what you are looking for?
KitchenAid KUDS30IXSS Builtin Dishwasher Logo

Related Topics:

982 people viewed this question

Ask a Question

Usually answered in minutes!

Top KitchenAid Dishwashers Experts

Carmen Mikulic

Level 2 Expert

415 Answers

Mike

Level 3 Expert

4357 Answers

Smitty

Level 1 Expert

240 Answers

Are you a KitchenAid Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...