Question about JVC DRMH20 DVD Recorder
My JVC DRMH20 DVD Recorder display flashes the message 'LOADING' 20 seconds after the 'finalise' function has started. If componant replacement is required that is not a problem.
I am not sure if this will work in your case but worth a try.
- Switch the unit off and unplug from wall
- Open the casing on dvd recorder,
- Disconnect hard drive power and data IDE cable
- Reconnect cables and put casing back and try.
This might work now ...
Posted on Oct 21, 2008
This is a well-documented fault. In the USA power lobbiests got JVC to
recall the units and fix the problem. The fault is a small component
that was wrongly specified - when it reaches a set 'maximum'
temperature is fails and causes a protection shut down. Over time it
fails to allow start up. It is worth finding your nearest JVC approved
repairer (if it is out of warranty) and have the recorder repaired.
Here's the official help as in the good old USA -
A limited number of units of certain models of DVD recorders (Models-DR-MV1S, DR-M10S, DR-MH30S, DRMX1S, SR-MV30U) have experienced the symptoms described. While manually resetting the unit, as set forth in the question, restores normal operation, the symptoms may reappear. JVC has identified the cause of these symptoms and will make the necessary adjustments to affected units to eliminate the likelihood that the symptoms reappear. Adjustments will be made free of charge at JVC Factory Service Centers. Click the Factory Service Center link at top left of this page to obtain your nearest location. Please call 1-800-252-5722 and select option 4-3 if you have any questions regarding this process.
Presumably the UK JVC Centres will also carry out these free of charge ! NO SUCH LUCK! We are 'Rip-off' Britain - as always.
Here - for your further understanding - what happens in the UK:
Repairs to JVC products are carried out through the JVC dealer network. All JVC dealers are aware of the technical support that is available from the JVC Service and Engineering Division if required. Unfortunately JVC UK are unable to quote the repair rates for JVC independent service dealers. We recommend that you call these dealers in order that they can communicate their repair charges to you.
The JVC Service Centre in the DE postcode area is: Trade Services, Holbrook Rd, Belper. Tel: 01773 822073
Repair Dealer : Relliance, Babbington Lane, Derby. Tel: 01332 363488
Posted on Oct 20, 2008
You have to replace sum IC's of your dvd the ic's are related to time out settings for your dvd
Posted on Oct 19, 2008
Clean the optical reader.just try a optical head cleaning on the unit
Posted on Oct 19, 2008
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Oct 04, 2009 | JVC DR-MV1S DVD Recorder/VCR
Sep 18, 2009 | JVC DR-MX1S DVD Recorder/VCR
Jan 29, 2009 | JVC DRMH20 DVD Recorder
Jul 11, 2008 | JVC DRMH20 DVD Recorder
Apr 08, 2006 | JVC DRMH20 DVD Recorder
260 people viewed this question
Usually answered in minutes!