Question about Stanley Fatmax Xtreme Retractable Utility Knife

Open Question

10-780 Stanley Fatmax Xtreme Retractable Utility Knife

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Just purchased a Stanley FatMax 10-778 retractable

1. Make sure the side lock is unlocked.
2. Push the thumb tab all the way to the front of the blade handle.
3. Insert the blade in the opening, you may notice two notches on the top side of the blade.
4. Press the small blade release button as you slide the blade into the knife. You may have to jiggle up and down to get the two notches on the blade fully into the handle.

If properly inserted, the exposed area of the blade should look very close to an equilateral triangle.

make sure both notches of the blade are inside the handle. They notch into the thumb lever.

good luck

Posted on Apr 11, 2010

Testimonial: "Thanks so much!"

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can't close stanley fatmax


It only goes in one way, try to loosen the screw a little

Jul 30, 2012 | Stanley Fatmax Xtreme Retractable Utility...

1 Answer

I have a stanley FatMax. How do I insert the blade into the case?


On the side there is a big gold wheel, twist counter clockwise and the case should split in half, the blade is held by a magnet, prise the old blade off and replace with new one, then put case back together and tighten gold wheel clockwise
Goodluck!

Mar 06, 2011 | Stanley Fatmax Xtreme Retractable Utility...

1 Answer

Can i buy a new blade slide for extreme utility knife


I can't see what country you live in from your profile, but if it's the UK, you could try www.partmaster.co.uk . They sell parts for just about anything.

Feb 28, 2011 | Stanley Fatmax Xtreme Retractable Utility...

1 Answer

Describe how you put a blade in FatMax model 10-778


The model in your picture is a fixed blade utility knife (model 10-816). Your question asks for instructions for model 10-778, which is a retractable knife. I'll guide you through the 10-778 which you asked for, if you need instructions for the pictured 10-816 please re-post the question.

Push the thumb slide forward as far as it goes exposing the blade. Press the blade change button on the side of the knife (the small button on the left side near the blade) and pull out the old blade.
Insert the new blade and slide thumb slide back to fully engage blade in the internal lock.

Dec 26, 2010 | Stanley Fatmax Xtreme Retractable Utility...

1 Answer

Cant put the thing back together after putting in new blade !!!fat max knife


some stanley knifes require stanley blades only, or make sure the clip blade is in is seated in the grove completely.

Dec 23, 2010 | Stanley Fatmax Xtreme Retractable Utility...

1 Answer

How do I put the first blade in the new knife?


open the blade all the way and turn the knob to loosen, then scissor the two halves to open

Oct 22, 2010 | Stanley Fatmax Xtreme Retractable Utility...

1 Answer

Change blades I just need a picture /instruction for blade change


The gold looking circle on the side of the utility knife. Just unscrew that and it will pop open then you can change the blade. I looked everywhere and am unable to find the instruction or picture. I own one and that is why I am answering this for you. Please rate

May 31, 2010 | Stanley Fatmax Xtreme Retractable Utility...

3 Answers

Just purchased a Stanley FatMax 10-778 retractable knife. Cannot figure out how to load the blade for use.


1. Make sure the side lock is unlocked.
2. Push the thumb tab all the way to the front of the blade handle.
3. Insert the blade in the opening, you may notice two notches on the top side of the blade.
4. Press the small blade release button as you slide the blade into the knife. You may have to jiggle up and down to get the two notches on the blade fully into the handle.

If properly inserted, the exposed area of the blade should look very close to an equilateral triangle.

make sure both notches of the blade are inside the handle. They notch into the thumb lever.

good luck

Mar 20, 2010 | Stanley Fatmax Xtreme Retractable Utility...

1 Answer

I brought a stanley fatmax retractable knife, have no idea why the blade is not coming out, trying to figure out if i did something wrong like putting the blade in the wrong spot.. this is the only time...


Are you using Stanley Blades or off brand? Hey, I use off brand but sometimes it does make a difference. Second, make sure the blade slider is clean. If you were cutting shingles, for instance, the tar gets in there and screws things up.. try WD-40 spray it liberally all over the blade slide and buttons. If that doesn't work and you purchased it at a Menards store, I can speak of experience they'll replace it no hassle.
I hope I helped

Jan 09, 2018 | Stanley Fatmax Xtreme Retractable Utility...

Not finding what you are looking for?
Stanley Fatmax Xtreme Retractable Utility Knife Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Stanley Measuring Tools & Sensors Experts

Marvin
Marvin

Level 3 Expert

85178 Answers

Lawrence Oravetz

Level 3 Expert

10543 Answers

Frank Walton

Level 1 Expert

26 Answers

Are you a Stanley Measuring Tool and Sensor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...