Question about Ricoh Aficio 450 Copier

1 Answer

Ricoh sc 672 error on new machine

Please wait for extended time then SC 672. Have tried another HDD, reseated all connectors on control board and control panel as well as checked all other connectors. Tried reloading firmware thru sd card and didn't recognize the card. tried booting with HDD disconnected and still codes out with SC 672

Posted by on

  • 1 more comment 
  • Jon Hyland Feb 28, 2012

    Cannot go into service mode at any time either

  • Jon Hyland Feb 28, 2012

    This is a MP6001 B?W machine

  • adongo noble Nov 07, 2016

    My richo aficio mp 2510 copier displays error code sc672. How can. I fix this?

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Welcome Back:

    Visited the website for 2 consecutive days.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 13 Answers

  1. Go to this code with "Clear Mode"+107+"Clear/Stop" hold for 5s.
  2. Go to System Settings
  3. Go to 5875
  4. Check the setting of SP5875-001. If the setting is set to "1 (OFF)",change it to "0 (OFF)".
Try checking or changing the thermistors!
The metal contact spring on the thermistor broken causing all sorts of 'unrelated errors including 'Please Wait' sc 670 and sc 402...

Posted on Feb 29, 2012

  • shaker fadlo
    shaker fadlo Dec 13, 2014

    The machine don't respond to this code even when I restart it I don't know what's the problem My machine is Gestetner Dsm 725 It gives me this message" Functional error sc 672"

  • Anonymous Jun 29, 2017

    In mine case The only solution was to clear the NV ram sp 5-801(first backup Sp 5-824 and print smc, incl.non default sheet if possible)

×

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

SOURCE: sc code 672 with aficio 2090

Direct from the service manual:

• Controller board defective
• Controller board installed incorrectly
• Operation panel harness connection loose or incorrect

Posted on May 05, 2009

  • 422 Answers

SOURCE: Problem with the Ricoh mp c2800 Ricoh error code

If the model ia a MPC 2800 it a controller board issue maybe the operation panel. -carl

Posted on Nov 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

E32 INSERT CARD AND REBOOT


672 is "Controller to Operation Panel Communication Error at Startup" - check any cables / plugs to ensure nothing is loose. Failing that, it's an internal connection between the operating panel and the main board.

Mar 24, 2014 | Ricoh Office Equipment & Supplies

1 Answer

What is error sc-672


It is a problem with the controller. Or the controller board is not installed correctly or maybe a connector is not connect correctly. It could be the controller is bad and should be replaced.

Jan 18, 2014 | Ricoh Aficio 3045, 3035 Kit

1 Answer

Ricoh aficio 3035/3045 error sc 672 not able to proceed to service mode also, kindly help me pls.


possible a bad operation panel replace or 672 B
After powering on the machine, the
communication circuit between the
controller and the operation panel is not
opened, or communication with
controller is interrupted after a normal
startup.
Controller stall
Controller board installed incorrectly
Controller board defective
Operation panel connector loose or
defective
690 A GAVD block I2C bus error
An error is detected in the GAVD
communication I2C control register of
the GABIC2.
I2C bus on BICU defective
691 A GAVD FCI block I2C bus error
An error is detected in the FCI
communication I2C control register of
the GABIC2.
I2C bus on BICU defective
692 A CDIC GAVD block I2C bus error
An error is detected in the CDIC
communication I2C control register of
the GABIC2.
I2C bus on BICU defective
700 B ARDF original pick-up malfunction
After the

Sep 21, 2012 | Ricoh Aficio 3045, 3035 Kit

1 Answer

TH42PZ85U Panasonic that will turn on for a couple of seconds, not even long enough for picture, then it shuts off. Red power light blinks 2 times with about 3 seconds in between the 2 blinks. I am...


1. Reseating the connector P25 may solve the problem. If it does not.
2.Right before the unit shuts down, check the VSUS voltage at connector P2 of the power supply. If VSUS voltage measures zero volt, disconnect the connector P2 and SS11. Check the VSUS level at socket P2. If it is still low, replace the P board.
3. Unplug the unit andd disconnect the connectors A5, A6, and A7. Apply power to the TV. If a White screen comes up and all voltages check normal, replace the P board.
4. If the TV stays on after isolating the SC board, then replace the SC board and the D board; it is likely that the fuse on the D board is blown

May 01, 2011 | Panasonic Viera TH-42PZ80U Plasma TV

1 Answer

At first when machine get ready then i place the original in ADF and set start the copy get out and message (please wait) appear on display and machine hung up then i removed NVram and Sdram and sc 672...


This code is related to a bad communications between the controller and the operation panel.
Could have the following causes:
- Controller installed incorrectly
- Operation panel harness disconnected or defective.
- Controller board defective.
(also check the jumper on the MBU fax unit. It must be set at the ON position)

I give this answer for the SC672 assuming that you know why you remove the NVram...

Apr 11, 2011 | Gestetner DSM 651 Copier

1 Answer

Ricoh 1045 error code sc 672, 961


Controller to operation panel comucation error at start up.Check the controller stall,controller board installed correctly operation panel connectors.Enter im the service menu ,press the SP mode,open the front door,turn off the copier,unplugged the machine.Wait 10 seconds,plugged on the machine,close the front door,turn ON the copier and make a copy.

Dec 28, 2009 | Ricoh Aficio 1035 Copier

1 Answer

Sc code 672 with aficio 2090


Direct from the service manual:

• Controller board defective
• Controller board installed incorrectly
• Operation panel harness connection loose or incorrect

May 03, 2009 | Office Equipment & Supplies

1 Answer

In Ricoh aficio 401


The SC360 is Hard disk drive error 1. This means that the machine does not detect the connection signal from the HDD.

CHECK THESE; poor connection between the HDD and the HDD controller,
the AC power connector to the HDD is disconnected,
HDD defective,
HDD controller board defective,
BICU defective.
Make sure all connections are tight and secure, make sure power is connected securely, make sure HDD ( hard drive) is not bad if so replace. If the above are fine, replace the controller board and if the problem is still there, replace the BICU board.

Nov 15, 2008 | Ricoh 6513 Copier

2 Answers

Error code sc 490 and sc360


Did you try to rest the error? Do you know how too?

Feb 09, 2008 | Ricoh Aficio 450 Copier

Not finding what you are looking for?
Ricoh Aficio 450 Copier Logo

18,586 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ricoh Office Equipment & Supplies Experts

gggg

Level 3 Expert

904 Answers

Adorjani Laszlo

Level 3 Expert

1316 Answers

quennie732

Level 2 Expert

422 Answers

Are you a Ricoh Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...