Question about Kyocera Copystar CS-1820 Black and White Copier
EVERYTHING IS CONNECTED AND NETWORK LOOKS CONFIGURED CORRECTLY.
PRINTER SCANS AND THEN AFTER AWHILE IT FLASHED ERROR SENDING 2101
You have to have a user name and password set up on the computer you are scanning to then you set theat up in the address you set up on the copier.
Posted on Nov 04, 2008
Where do you change the Port ?
Posted on Nov 14, 2012
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Sep 15, 2018 | The Office Equipment & Supplies
Jan 23, 2014 | Lexmark OfficeEdge Pro5500 4-in-1 Inkjet...
Jan 12, 2013 | Kyocera FS-1135MFP
Oct 14, 2012 | Lexmark X5650 All-in-One InkJet Printer
2101, 2102, 2103, 2201, 2202, 2203, 3101:
The network cable is disconnected or the hub that it is connected to is not operating properly. Check the cable and the hub. Otherwise, the server name or the host name of the SMTP server is
not set correctly. Use COMMAND CENTER and register the SMTP server name and the host name
2204: The E-mail size exceeds the acceptable send data capacity. Decrease the size or resolution of the scanned data to be transmitted and resend the E-mail. 5101, 5102, 5103, 5104, 7102, 720f:
Turn the main power switch off and back on. If this error occurs several times, make a note of the displayed error code and contact your service representative.(Refer to the corrective action for the error message " An error has occurred.")
9181: The scanned original exceeds the acceptable number of pages of 999. Send the ecess pages separately.
Hope this is helpful,
Mar 11, 2011 | Kyocera Mita KM-5035 Printer
2101, 2102, 2201, 2202, 2203, 3101:
The network cable is disconnected or the hub that it is connected to is not operating properly. Check the cable and the hub. Otherwise, the server name or the host name of the SMTP server is not set correctly. Use COMMAND CENTER and register the SMTP server name and the host name correctly.
The link below takes you to Kyocera's Scan to SMB setup guide on GFBM's website (they are a Kyocera dealer). The guide setup guide is good and gives pictures and examples.
I hope this is helpful,
Feb 11, 2011 | Kyocera Copystar CS-1820 Black and White...
Dec 03, 2010 | Laser 3115cn All-In-One Printer
Oct 14, 2008 | Kyocera Mita FS 3800 Laser Printer
27,848 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: