Question about Motorola Mag One BPR40 Two Way Radio

Open Question

Motorola BPR40 beeps constantly

It just beeps constantly, any ideas what can it be?

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
eradiostore
  • 1655 Answers

SOURCE: re: MagOne by Motorola, BPR40

None of the buttons will solve this issue.

A repeating low tone is heard when you press the PTT if your battery level is low. You may have a bad or poorly charged battery. It takes more energy to transmit than to receive, so the first place this shows up is when pressing the PTT. A quick way to check this is to swap batteries with a known good radio and see if the problem switches to the other radio.

Battery tips: Clean your battery contacts with a pencil eraser to remove the film caused by hand oil. Always charge your battery with the radio turned off. And be certain your charger is plugged into an outlet that is not connected to a light switch shutting off power. Batteries last approx. 2 years. Check your battery's date code to see its age. (3 or 4 digit number, first one-two numbers are the year, second two are the week of the year. example: 1132 would be 2011 the 32nd week)

If the above does not solve your problem, you should see your local Motorola dealer, or a nationwide repair center for more assistance. Current flat rate repair on this style unit is typically around $69.

FYI: Your buttons are likely top button = monitor/sticky monitor and the bottom button could be hi/low power, scan or one of several other features. Each button has a short and a long press option.

Best regards.

Posted on Aug 09, 2011

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Motorola bpr40 no modulation


check your final for correct voltage . Also your driver then your Integrated circuits' . If they are bad then replace them .

Nov 15, 2016 | Motorola Radio Communications

1 Answer

Motorola BPR 40 will transmit,but not receive through the microphone. Works fine as a handheld


You may have one of three problems: Your audio accessory jack is bad, you are using the wrong mic for the radio, or your mic is bad. Try the mic on a known good BPR40 and if it test good, if so, your BPR40 with the problem needs a new audio accessory jack. (Repair is available for this model.) We have found the BPR40 will only work properly with the remote speaker mic designed for it, despite some other Motorola mics appearing to fit the jack. Construction grade mic PMMN4013 is a good option, as is the lightweight PMMN4077.

Jul 08, 2015 | Motorola Radio Communications

1 Answer

Mag One BPR40 not powering


Contact Motorola Solutions (http://www.motorolasolutions/support)

Jun 26, 2014 | Motorola Mag One BPR40 Two Way Radio

1 Answer

How do you synch a set of Motorola MagOne BPR40 radios to a new set of the same radios?


BPR40 radios are dealer programmable using Motorola proprietary software and cable.

Jun 23, 2014 | Motorola Mag One BPR40 Two Way Radio

1 Answer

How do i remove the circuit board in the BPR40


PeteD.

Contact Motorola Solutions.


Get Support

Mark
Motorola Mobility Support

Mar 13, 2014 | Motorola Headset Mic Vl130 Pr400 Bpr40...

1 Answer

Have two bpr40 need to find out the frequencys


The BPR40 is a dealer programmable radio. The frequencies would need to be read out using Motorola proprietary software. The only thing you can tell from looking at the radio is whether it is VHF or UHF. Model number AAH84K... is VHF and AAH84R... is UHF.
Best regards.

Aug 20, 2013 | Motorola Mag One BPR40 Two Way Radio

1 Answer

How do I connect Mag One BPR40 two way radio by Motorola to CP100 two way radio by Motorola? I already had about 8 CP100's and we just got 2 new Mag One's. Thanks.


The Mag One BPR40 is dealer programmable. You have two choices:

1) Reprogram your CP100s to match the new BPR40s. For this you would need to know what the dealer programmed the BPR40s to... OR
2) Take your BPR40s back to the place of purchase and request they reprogram them to match your CP100s. This should be a free service since you just purchased the BPR40s. They will need to know some settings from the CP100s to make the match.

Best regards.

Sep 17, 2011 | Motorola Mag One BPR40 Two Way Radio

2 Answers

Motorola BPR40 how to clone


How To Clone a BPR40 Radio
Cloning duplicates the contents of your radio (master radio) into the new radio (slave radio). Tuning and alignment information are not affected by cloning.

Set Up the Master Radio

1. Turn off the radio.
2. Press and hold Programmable Button 1 (the top programmable button) and turn on the radio. Keep pressing the Programmable Button 1 until beep is heard twice.
3. Release Programmable Button 1. Notice the LED changes to RED

Set Up the Slave Radio
1. Turn off the radio.
2. Press and hold Programmable Button 1(the top programmable button) and turn on the radio. Keep pressing Programmable Button 1 until the beep is heard three times.
3. Release Programmable Button 1. Notice that the LED changes to GREEN

BPR40 Radio to Radio Cloning Procedures

1. Connect the cloning cable to both the Master and Slave radio.
2. Press and release Programmable Button 1 of the Slave radio.
3. Within 2 seconds Press and release Programmable Button 1 of the Master radio.
4. The LED for both radios show flashing orange during cloning.
5. Once cloning is completed, an

Mar 24, 2009 | Radio Communications

Not finding what you are looking for?
Motorola Mag One BPR40 Two Way Radio Logo

Related Topics:

737 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorola Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1655 Answers

Anthony Ward
Anthony Ward

Level 2 Expert

396 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Motorola Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...