Question about Konica Minolta bizhub 250 All-In-One Laser Printer
Our BizHub 250 was just serviced. We are now suddenly showing a Malfunction Code C2557. Anyone know how to fix?
Ok il start by saying that my english is veryyyy bad.
ok so the developer is guarantied for 80000 copies but i seen 200k with a new dev. (developer type dv310) after some of the developer is lost in the copying proses the ac-dc sensor detects that the concentration is rong and it shows the C2557 error thats wen the error is shown by the copier . solving it is simple you can replace the dev. and run F8 mode if it dosent work manually ajust the acdc to a lower value (lower value means that is les tonner in the dev. hyer value more tonner obviously ) , 0r leave the old dev. in it and ajut the acdc to about 180 (you can ajust to 180 take out the tonner botle make some black copies(30) and put back the tonner bottle and adjust to a lower value that works) . The problem can also apear if the copier docent supply tonner so check that first . Entering the service menu is simple pres utility > (toch screen) original size> (kepad) stop>0>0>stop>0>1 the password from the manufacturer is 00000000 , in the service menu select tech mode in ther yowl find the different start modes F8,F... , and you have printer select printer and acdc adjustment , pres C to clear the value and via keypad enter the desired value . THE REST IS UP TU YOU MY FRIEND . CAUTION IF YOU DONT HAVE ANY IDEA ABOUT A LASER COPIER DONT EVEN ENTER THE SERVICE MODE CAUSE YOU CAN DO MENY WRONGS IN THE COPIER . GOOD LUCK
Posted on Nov 10, 2009
Go in service mode, counter special parts counter, reset the PC Life, then , in service mode again function, and as said previously : F8
Posted on Jan 06, 2009
Toner concentration is wrong, change developer and do F8, you can also dry to do just F8 but it wount help always
Posted on Nov 12, 2008
When the developer was changed did the tech use a vacuum cleaner if so he may have destroyed the ATDC sensor. Clear counters first EXIT once THEN POWER OFF Master Power Rear left side (DO NOT EXIT ALL the WAY OUT OF SERVICE MODE), dump old developer, install new developer run F8. Do not run copies or prints before running F8 Remove Ethernet cable and FAX line to prevent any printing.
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f
Posted on Dec 30, 2014
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Oct 11, 2018 | Office Equipment & Supplies
Feb 09, 2015 | Konica Minolta bizhub 250 All-In-One Laser...
Feb 04, 2011 | Konica Minolta bizhub 250 All-In-One Laser...
Sep 20, 2010 | Konica Minolta bizhub 250 All-In-One Laser...
Jul 08, 2010 | Konica Minolta bizhub C250 All-In-One...
Sep 30, 2009 | Konica Minolta bizhub 350 All-In-One Laser...
Jul 31, 2009 | Konica Minolta bizhub 250 All-In-One Laser...
Mar 21, 2009 | Konica Minolta bizhub C250 All-In-One...
Jan 11, 2009 | Konica Minolta bizhub 250 All-In-One Laser...
21,867 people viewed this question
Usually answered in minutes!
Level 3 Expert
Level 3 Expert
Level 2 Expert